ack/mach/proto/mcg/treebuilder.c

1893 lines
46 KiB
C
Raw Permalink Normal View History

#include "mcg.h"
static struct basicblock* current_bb;
static int stackptr;
static struct ir* stack[64];
struct jumptable
{
struct basicblock* defaulttarget;
IMAPOF(struct basicblock) targets;
};
static struct ir* convert(struct ir* src, int srcsize, int destsize, int opcode);
static struct ir* appendir(struct ir* ir);
static void insn_ivalue(int opcode, arith value);
static void parse_csa(struct basicblock* data_bb, struct jumptable* table);
static void parse_csb(struct basicblock* data_bb, struct jumptable* table);
static void emit_jumptable(struct ir* targetvalue, struct jumptable* table);
static void reset_stack(void)
{
stackptr = 0;
}
static void push(struct ir* ir)
{
if (stackptr == sizeof(stack)/sizeof(*stack))
fatal("stack overflow");
#if 0
/* If we try to push something which is too small, convert it to a word
* first. */
if (ir->size < EM_wordsize)
ir = convertu(ir, EM_wordsize);
#endif
stack[stackptr++] = ir;
}
/* Returns the size of the top item on the stack. */
static int peek(int delta)
{
if (stackptr <= delta)
return EM_wordsize;
else
{
struct ir* ir = stack[stackptr-1-delta];
return ir->size;
}
}
static struct ir* pop(int size)
{
if (size < EM_wordsize)
size = EM_wordsize;
if (stackptr == 0)
{
/* Nothing in our fake stack, so we have to read from the real stack. */
if (size < EM_wordsize)
size = EM_wordsize;
return
appendir(
new_ir0(
IR_POP, size
)
);
}
else
{
struct ir* ir = stack[--stackptr];
#if 0
/* If we try to pop something which is smaller than a word, convert it first. */
if (size < EM_wordsize)
ir = convertu(ir, size);
#endif
if (ir->size != size)
{
if ((size == (EM_wordsize*2)) && (ir->size == EM_wordsize))
{
/* Tried to read a long, but we got an int. Assemble the long
* out of two ints. Note that EM doesn't specify an order. */
return
new_ir2(
IR_FROMIPAIR, size,
ir,
pop(EM_wordsize)
);
}
else if ((size == EM_wordsize) && (ir->size == (EM_wordsize*2)))
{
appendir(ir);
/* Tried to read an int, but we got a long. */
push(
new_ir1(
IR_FROML1, EM_wordsize,
ir
)
);
return
new_ir1(
IR_FROML0, EM_wordsize,
ir
);
}
else
fatal("expected an item on stack of size %d, but got %d\n", size, ir->size);
}
return ir;
}
}
static void print_stack(void)
{
int i;
tracef('E', "E: stack:");
for (i=0; i<stackptr; i++)
{
struct ir* ir = stack[i];
tracef('E', " $%d.%d", ir->id, ir->size);
}
tracef('E', " (top)\n");
}
static struct ir* appendir(struct ir* ir)
{
int i;
assert(current_bb != NULL);
array_appendu(&current_bb->irs, ir);
ir_print('0', ir);
return ir;
}
static void sequence_point(void)
{
int i;
/* Ensures that any partially-evaluated expressions on the stack are executed right
* now. This typically needs to happen before store operations, to prevents loads of
* the same address being delayed until after the store (at which point they'll
* return incorrect values).
*/
assert(current_bb != NULL);
for (i=0; i<stackptr; i++)
{
struct ir* ir = stack[i];
array_appendu(&current_bb->irs, ir);
}
}
static void materialise_stack(void)
{
int i;
for (i=0; i<stackptr; i++)
{
struct ir* ir = stack[i];
appendir(
new_ir1(
IR_PUSH, ir->size,
ir
)
);
}
reset_stack();
}
void tb_filestart(void)
{
}
void tb_fileend(void)
{
}
void tb_regvar(struct procedure* procedure, arith offset, int size, int type, int priority)
{
struct local* local = calloc(1, sizeof(*local));
local->size = size;
local->offset = offset;
local->is_register = true;
imap_put(&procedure->locals, offset, local);
}
static struct ir* address_of_external(const char* label, arith offset)
{
if (offset != 0)
return
new_ir2(
IR_ADD, EM_pointersize,
new_labelir(label),
new_wordir(offset)
);
else
return
new_labelir(label);
}
static struct ir* convert(struct ir* src, int srcsize, int destsize, int opcode)
{
if (srcsize == 1)
{
if ((opcode == IR_FROMSI) || (opcode == IR_FROMSL))
{
src = new_ir1(
IR_EXTENDB, EM_wordsize,
src
);
}
srcsize = EM_wordsize;
}
if ((srcsize == 2) && (srcsize != EM_wordsize))
{
if ((opcode == IR_FROMSI) || (opcode == IR_FROMSL))
{
src = new_ir1(
IR_EXTENDH, EM_wordsize,
src
);
}
srcsize = EM_wordsize;
}
if (src->size == EM_wordsize)
{}
else if (src->size == (2*EM_wordsize))
opcode++;
else
fatal("can't convert from %d to %d", src->size, destsize);
return
new_ir1(
opcode, destsize,
src
);
}
static struct ir* compare(struct ir* left, struct ir* right,
int size, int opcode)
{
if (size == EM_wordsize)
{}
else if (size == (2*EM_wordsize))
opcode++;
else
fatal("can't compare things of size %d", size);
return
new_ir2(
opcode, EM_wordsize,
left, right
);
}
static struct ir* store(int size, struct ir* address, int offset, struct ir* value)
{
int opcode;
sequence_point();
if (size == 1)
{
opcode = IR_STOREB;
size = EM_wordsize;
}
else if ((size < EM_wordsize) && (size == 2))
{
opcode = IR_STOREH;
size = EM_wordsize;
}
else
opcode = IR_STORE;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (offset != 0)
address = new_ir2(
IR_ADD, EM_pointersize,
address, new_wordir(offset)
);
return
new_ir2(
opcode, size,
address, value
);
}
static struct ir* load(int size, struct ir* address, int offset)
{
int opcode;
if (size == 1)
{
opcode = IR_LOADB;
size = EM_wordsize;
}
else if ((size < EM_wordsize) && (size == 2))
{
opcode = IR_LOADH;
size = EM_wordsize;
}
else
opcode = IR_LOAD;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (offset != 0)
address = new_ir2(
IR_ADD, EM_pointersize,
address, new_wordir(offset)
);
return
new_ir1(
opcode, size,
address
);
}
static struct ir* tristate_compare(int size, int opcode)
{
struct ir* right = pop(size);
struct ir* left = pop(size);
return compare(left, right, size, opcode);
}
2016-10-22 18:32:51 +00:00
static struct ir* tristate_compare0(int size, int opcode)
{
struct ir* right = new_wordir(0);
struct ir* left = pop(size);
return compare(left, right, size, opcode);
}
static void simple_convert(int opcode)
{
struct ir* destsize = pop(EM_wordsize);
struct ir* srcsize = pop(EM_wordsize);
struct ir* value;
assert(srcsize->opcode == IR_CONST);
assert(destsize->opcode == IR_CONST);
value = pop(srcsize->u.ivalue);
push(
convert(value, srcsize->u.ivalue, destsize->u.ivalue, opcode)
);
}
2016-10-22 18:32:51 +00:00
static void simple_branch2(int opcode, int size,
struct basicblock* truebb, struct basicblock* falsebb,
int irop)
{
struct ir* right = pop(size);
struct ir* left = pop(size);
materialise_stack();
appendir(
new_ir2(
irop, 0,
compare(left, right, size, IR_COMPARESI),
2016-10-22 18:32:51 +00:00
new_ir2(
IR_PAIR, 0,
new_bbir(truebb),
new_bbir(falsebb)
)
)
);
}
static void compare0_branch2(int opcode,
struct basicblock* truebb, struct basicblock* falsebb,
int irop)
{
push(
new_wordir(0)
);
simple_branch2(opcode, EM_wordsize, truebb, falsebb, irop);
}
static void simple_test(int size, int irop)
{
push(
new_ir1(
irop, EM_wordsize,
tristate_compare0(size, IR_COMPARESI)
2016-10-22 18:32:51 +00:00
)
);
}
static void simple_test_neg(int size, int irop)
{
simple_test(size, irop);
push(
new_ir1(
IR_NOT, EM_wordsize,
pop(EM_wordsize)
)
);
}
static void helper_function(const char* name)
{
/* Delegates to a helper function; these leave their result on the stack
* rather than returning values through lfr. */
materialise_stack();
appendir(
new_ir1(
IR_CALL, 0,
new_labelir(name)
)
);
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
static void helper_function_with_arg(const char* name, struct ir* arg)
{
/* Abuses IR_SETRET to set a register to pass one argument to a
* helper function.
*
* FIXME: As of January 2018, mach/powerpc/libem takes an
* argument in register r3 only for ".los4", ".sts4", ".trp".
* This is an accident. Should the argument be on the stack, or
* should other helpers use a register? */
materialise_stack();
appendir(
new_ir1(
IR_SETRET, arg->size,
arg
)
);
appendir(
new_ir1(
IR_CALL, 0,
new_labelir(name)
)
);
}
static void insn_simple(int opcode)
{
switch (opcode)
{
case op_bra:
{
struct ir* dest = pop(EM_pointersize);
materialise_stack();
appendir(
new_ir1(
IR_JUMP, 0,
dest
)
);
break;
}
case op_cii: simple_convert(IR_FROMSI); break;
case op_ciu: simple_convert(IR_FROMSI); break;
case op_cui: simple_convert(IR_FROMUI); break;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_cuu: simple_convert(IR_FROMUI); break;
case op_cfu: simple_convert(IR_FROMUF); break;
case op_cfi: simple_convert(IR_FROMSF); break;
case op_cif: simple_convert(IR_FROMSI); break;
case op_cuf: simple_convert(IR_FROMUI); break;
case op_cff: simple_convert(IR_FROMSF); break;
case op_cmp:
push(
tristate_compare(EM_pointersize, IR_COMPAREUI)
);
break;
case op_teq: simple_test( EM_wordsize, IR_IFEQ); break;
2016-10-22 18:32:51 +00:00
case op_tne: simple_test_neg(EM_wordsize, IR_IFEQ); break;
case op_tlt: simple_test( EM_wordsize, IR_IFLT); break;
case op_tge: simple_test_neg(EM_wordsize, IR_IFLT); break;
case op_tle: simple_test( EM_wordsize, IR_IFLE); break;
case op_tgt: simple_test_neg(EM_wordsize, IR_IFLE); break;
case op_cai:
{
struct ir* dest = pop(EM_pointersize);
materialise_stack();
appendir(
new_ir1(
IR_CALL, 0,
dest
)
);
break;
2016-10-10 22:29:18 +00:00
}
case op_inc:
{
push(
new_ir2(
IR_ADD, EM_wordsize,
pop(EM_wordsize),
new_wordir(1)
)
);
break;
}
case op_dec:
{
push(
new_ir2(
IR_SUB, EM_wordsize,
pop(EM_wordsize),
new_wordir(1)
)
);
break;
}
case op_lim:
{
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
/* Traps use only 16 bits of .ignmask, but we keep an
* entire word, even if a word has more than 2 bytes. */
push(
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
load(
EM_wordsize,
new_labelir(".ignmask"), 0
)
);
break;
}
case op_sim:
{
appendir(
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
store(
EM_wordsize,
new_labelir(".ignmask"), 0,
pop(EM_wordsize)
)
);
break;
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_trp:
helper_function_with_arg(".trp", pop(EM_wordsize));
break;
case op_sig:
{
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
struct ir* label = new_labelir(".trppc");
struct ir* value = pop(EM_pointersize);
appendir(label); /* because we need to use label twice */
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
push(
load(
EM_pointersize,
label, 0
)
);
appendir(
store(
EM_pointersize,
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
label, 0,
value
)
);
break;
}
case op_rtt:
{
insn_ivalue(op_ret, 0);
break;
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_and: helper_function(".and"); break;
case op_ior: helper_function(".ior"); break;
case op_xor: helper_function(".xor"); break;
case op_com: helper_function(".com"); break;
case op_cms: helper_function(".cms"); break;
case op_set: helper_function(".set"); break;
case op_inn: helper_function(".inn"); break;
case op_dch:
push(
new_ir1(
IR_CHAINFP, EM_pointersize,
pop(EM_pointersize)
)
);
2016-10-21 22:48:55 +00:00
break;
case op_lpb:
push(
new_ir1(
IR_FPTOAB, EM_pointersize,
pop(EM_pointersize)
)
);
break;
case op_lni:
{
/* Increment line number --- ignore. */
break;
}
default:
fatal("treebuilder: unknown simple instruction '%s'",
em_mnem[opcode - sp_fmnem]);
}
}
static void insn_bvalue(int opcode, struct basicblock* leftbb, struct basicblock* rightbb)
{
switch (opcode)
{
case op_zeq: compare0_branch2(opcode, leftbb, rightbb, IR_CJUMPEQ); break;
case op_zlt: compare0_branch2(opcode, leftbb, rightbb, IR_CJUMPLT); break;
case op_zle: compare0_branch2(opcode, leftbb, rightbb, IR_CJUMPLE); break;
case op_zne: compare0_branch2(opcode, rightbb, leftbb, IR_CJUMPEQ); break;
case op_zge: compare0_branch2(opcode, rightbb, leftbb, IR_CJUMPLT); break;
case op_zgt: compare0_branch2(opcode, rightbb, leftbb, IR_CJUMPLE); break;
case op_beq: simple_branch2(opcode, EM_wordsize, leftbb, rightbb, IR_CJUMPEQ); break;
case op_blt: simple_branch2(opcode, EM_wordsize, leftbb, rightbb, IR_CJUMPLT); break;
case op_ble: simple_branch2(opcode, EM_wordsize, leftbb, rightbb, IR_CJUMPLE); break;
case op_bne: simple_branch2(opcode, EM_wordsize, rightbb, leftbb, IR_CJUMPEQ); break;
case op_bge: simple_branch2(opcode, EM_wordsize, rightbb, leftbb, IR_CJUMPLT); break;
case op_bgt: simple_branch2(opcode, EM_wordsize, rightbb, leftbb, IR_CJUMPLE); break;
case op_bra:
{
materialise_stack();
appendir(
new_ir1(
IR_JUMP, 0,
new_bbir(leftbb)
)
);
break;
}
case op_lae:
push(
new_bbir(leftbb)
);
break;
default:
fatal("treebuilder: unknown bvalue instruction '%s'",
em_mnem[opcode - sp_fmnem]);
}
}
static void simple_alu1(int opcode, int size, int irop, const char* fallback)
{
if (size > (2*EM_wordsize))
{
if (!fallback)
fatal("treebuilder: can't do opcode %s with size %d", em_mnem[opcode - sp_fmnem], size);
push(
new_wordir(size)
);
helper_function(fallback);
}
else
{
struct ir* val = pop(size);
push(
new_ir1(
irop, size,
val
)
);
}
}
static void simple_alu2(int opcode, int size, int irop, const char* fallback)
{
if (size > (2*EM_wordsize))
{
if (!fallback)
fatal("treebuilder: can't do opcode %s with size %d", em_mnem[opcode - sp_fmnem], size);
push(
new_wordir(size)
);
helper_function(fallback);
}
else
{
struct ir* right = pop(size);
struct ir* left = pop(size);
push(
new_ir2(
irop, size,
left, right
)
);
}
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
static void rotate(int opcode, int size, int irop, int irop_reverse)
{
if (size > (2*EM_wordsize))
fatal("treebuilder: can't do opcode %s with size %d", em_mnem[opcode - sp_fmnem], size);
else
{
struct ir* right = pop(size);
struct ir* left = pop(size);
struct ir* bits = new_wordir(8 * size);
2018-09-17 12:13:39 +00:00
/* Fix left and right so we can refer to them multiple times. */
appendir(right);
appendir(left);
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
/* a rol b -> (a << b) | (a >> (32 - b)) */
push(
new_ir2(
IR_OR, size,
new_ir2(irop, size, left, right),
new_ir2(
irop_reverse, size,
left,
new_ir2(IR_SUB, size, bits, right)
)
)
);
}
}
2016-10-02 12:44:21 +00:00
static void change_by(struct ir* address, int amount)
{
appendir(
store(
EM_wordsize, address, 0,
2016-10-02 12:44:21 +00:00
new_ir2(
IR_ADD, EM_wordsize,
load(
EM_wordsize, address, 0
2016-10-02 12:44:21 +00:00
),
new_wordir(amount)
)
)
);
}
static struct ir* ptradd(struct ir* address, int offset)
{
if (offset == 0)
return address;
return
new_ir2(
IR_ADD, EM_pointersize,
address,
new_wordir(offset)
);
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
static struct ir* walk_static_chain(int level)
{
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
struct ir* ir;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
/* The static chain, when it exists, is the first argument of each
* procedure. The chain begins with the current frame at level 0,
* and continues until we reach the outermost procedure. */
ir = new_ir0(
IR_GETFP, EM_pointersize
);
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
while (level--)
{
/* Walk to the next frame pointer. */
ir = load(
EM_pointersize,
new_ir1(
IR_FPTOAB, EM_pointersize,
ir
), 0
);
}
return ir;
}
static void insn_ivalue(int opcode, arith value)
{
switch (opcode)
{
case op_adi: simple_alu2(opcode, value, IR_ADD, NULL); break;
case op_sbi: simple_alu2(opcode, value, IR_SUB, NULL); break;
case op_mli: simple_alu2(opcode, value, IR_MUL, NULL); break;
case op_dvi: simple_alu2(opcode, value, IR_DIV, NULL); break;
case op_rmi: simple_alu2(opcode, value, IR_MOD, NULL); break;
case op_sli: simple_alu2(opcode, value, IR_ASL, NULL); break;
case op_sri: simple_alu2(opcode, value, IR_ASR, NULL); break;
case op_ngi: simple_alu1(opcode, value, IR_NEG, NULL); break;
case op_adu: simple_alu2(opcode, value, IR_ADD, NULL); break;
case op_sbu: simple_alu2(opcode, value, IR_SUB, NULL); break;
case op_mlu: simple_alu2(opcode, value, IR_MUL, NULL); break;
case op_slu: simple_alu2(opcode, value, IR_LSL, NULL); break;
case op_sru: simple_alu2(opcode, value, IR_LSR, NULL); break;
case op_rmu: simple_alu2(opcode, value, IR_MODU, NULL); break;
case op_dvu: simple_alu2(opcode, value, IR_DIVU, NULL); break;
case op_and: simple_alu2(opcode, value, IR_AND, ".and"); break;
case op_ior: simple_alu2(opcode, value, IR_OR, ".ior"); break;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_xor: simple_alu2(opcode, value, IR_EOR, ".xor"); break;
case op_com: simple_alu1(opcode, value, IR_NOT, ".com"); break;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_rol: rotate(opcode, value, IR_LSL, IR_LSR); break;
case op_ror: rotate(opcode, value, IR_LSR, IR_LSL); break;
case op_adf: simple_alu2(opcode, value, IR_ADDF, NULL); break;
case op_sbf: simple_alu2(opcode, value, IR_SUBF, NULL); break;
case op_mlf: simple_alu2(opcode, value, IR_MULF, NULL); break;
case op_dvf: simple_alu2(opcode, value, IR_DIVF, NULL); break;
case op_ngf: simple_alu1(opcode, value, IR_NEGF, NULL); break;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_cms:
if (value > (2*EM_wordsize))
{
push(new_wordir(value));
helper_function(".cms");
break;
}
/* fall through */
case op_cmu: push(tristate_compare(value, IR_COMPAREUI)); break;
case op_cmi: push(tristate_compare(value, IR_COMPARESI)); break;
case op_cmf: push(tristate_compare(value, IR_COMPAREF)); break;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_rck:
if (value != EM_wordsize)
fatal("'rck %d' not supported", value);
helper_function(".rck");
break;
case op_set: push(new_wordir(value)); helper_function(".set"); break;
case op_inn: push(new_wordir(value)); helper_function(".inn"); break;
case op_lol:
push(
load(
EM_wordsize,
new_localir(value), 0
)
);
break;
case op_ldl:
push(
load(
EM_wordsize*2,
new_localir(value), 0
)
);
break;
case op_stl:
appendir(
store(
EM_wordsize,
new_localir(value), 0,
pop(EM_wordsize)
)
);
break;
case op_sdl:
appendir(
store(
EM_wordsize*2,
new_localir(value), 0,
pop(EM_wordsize*2)
)
);
break;
case op_lal:
push(
new_localir(value)
);
break;
case op_lil:
push(
load(
EM_wordsize,
load(
EM_pointersize,
new_localir(value), 0
), 0
)
);
break;
case op_sil:
appendir(
store(
EM_wordsize,
load(
EM_pointersize,
new_localir(value), 0
), 0,
pop(EM_wordsize)
)
);
break;
2016-10-02 12:44:21 +00:00
case op_inl:
change_by(new_localir(value), 1);
break;
case op_del:
change_by(new_localir(value), -1);
break;
case op_zrl:
appendir(
store(
EM_wordsize,
new_localir(value), 0,
new_wordir(0)
)
);
break;
2016-10-22 18:32:51 +00:00
case op_zrf:
{
struct ir* ir = new_constir(value, 0);
ir->opcode = IR_CONST;
2016-10-22 18:32:51 +00:00
push(ir);
break;
}
2016-10-17 22:31:26 +00:00
case op_loe:
push(
load(
EM_wordsize,
new_labelir(".hol0"), value
2016-10-17 22:31:26 +00:00
)
);
break;
2016-10-29 11:32:09 +00:00
case op_lae:
push(
new_ir2(
IR_ADD, EM_pointersize,
new_labelir(".hol0"),
new_wordir(value)
)
);
break;
2016-10-17 22:31:26 +00:00
case op_ste:
appendir(
store(
EM_wordsize,
new_labelir(".hol0"), value,
2016-10-17 22:31:26 +00:00
pop(EM_wordsize)
)
);
break;
case op_zre:
appendir(
store(
EM_wordsize,
new_labelir(".hol0"), value,
2016-10-17 22:31:26 +00:00
new_wordir(0)
)
);
break;
case op_loc:
push(
new_wordir(value)
);
break;
case op_loi:
{
struct ir* ptr = pop(EM_pointersize);
int offset = 0;
if (value > (EM_wordsize*2))
{
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
/* We're going to need to do multiple loads; fix the address
* so it'll go into a register and we can do maths on it. */
appendir(ptr);
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
/* Stack grows down. Load backwards. */
while (value > 0)
{
int s = EM_wordsize*2;
if (value < s)
s = value;
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
value -= s;
push(
load(
s,
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
ptr, value
)
);
}
assert(value == 0);
break;
}
2016-10-15 09:22:40 +00:00
case op_lof:
{
struct ir* ptr = pop(EM_pointersize);
push(
load(
EM_wordsize,
ptr, value
2016-10-15 09:22:40 +00:00
)
);
break;
}
2016-10-24 10:08:40 +00:00
case op_ldf:
{
struct ir* ptr = pop(EM_pointersize);
push(
load(
EM_wordsize*2,
ptr, value
)
);
break;
}
case op_sti:
{
struct ir* ptr = pop(EM_pointersize);
int offset = 0;
if (value > peek(0))
{
/* We're going to need to do multiple stores; fix the address
* so it'll go into a register and we can do maths on it. */
appendir(ptr);
}
while (value > 0)
{
struct ir* v = pop(peek(0));
int s = v->size;
if (value < s)
s = value;
appendir(
store(
s,
ptr, offset,
v
)
);
value -= s;
offset += s;
}
assert(value == 0);
break;
}
2016-10-15 09:22:40 +00:00
case op_stf:
{
struct ir* ptr = pop(EM_pointersize);
2016-10-17 22:31:26 +00:00
struct ir* val = pop(EM_wordsize);
2016-10-15 09:22:40 +00:00
appendir(
store(
EM_wordsize,
ptr, value,
2016-10-15 09:22:40 +00:00
val
)
);
2016-10-24 10:08:40 +00:00
break;
}
case op_sdf:
{
struct ir* ptr = pop(EM_pointersize);
struct ir* val = pop(EM_wordsize*2);
appendir(
store(
EM_wordsize*2,
ptr, value,
val
)
);
2016-10-15 09:22:40 +00:00
break;
}
case op_ads:
{
struct ir* off = pop(value);
struct ir* ptr = pop(EM_pointersize);
if (value != EM_pointersize)
off = convert(off, value, EM_pointersize, IR_FROMUI);
push(
new_ir2(
IR_ADD, EM_pointersize,
ptr, off
)
);
break;
}
case op_adp:
{
struct ir* ptr = pop(EM_pointersize);
push(
new_ir2(
IR_ADD, EM_pointersize,
ptr,
new_wordir(value)
)
);
break;
}
case op_sbs:
{
struct ir* right = pop(EM_pointersize);
struct ir* left = pop(EM_pointersize);
struct ir* delta =
new_ir2(
IR_SUB, EM_pointersize,
left, right
);
if (value != EM_pointersize)
delta = convert(delta, EM_pointersize, value, IR_FROMUI);
push(delta);
break;
}
case op_dup:
{
sequence_point();
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (value > (2*EM_wordsize))
{
push(new_wordir(value));
helper_function(".dus4");
}
else if ((value == (EM_wordsize*2)) && (peek(0) == EM_wordsize) && (peek(1) == EM_wordsize))
{
struct ir* v1 = pop(EM_wordsize);
struct ir* v2 = pop(EM_wordsize);
push(v2);
push(v1);
push(v2);
push(v1);
}
else
{
struct ir* v = pop(value);
push(v);
push(v);
}
break;
}
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
case op_dus:
{
if (value != EM_wordsize)
fatal("'dus %d' not supported", value);
helper_function(".dus4");
break;
}
2016-10-29 11:32:09 +00:00
case op_exg:
{
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (value > (2*EM_wordsize))
{
push(
new_wordir(value)
);
helper_function(".exg");
}
else
{
struct ir* v1 = pop(value);
struct ir* v2 = pop(value);
push(v1);
push(v2);
}
2016-10-29 11:32:09 +00:00
break;
}
case op_zer:
{
if (value <= EM_wordsize)
push(new_constir(value, 0));
else
{
push(new_wordir(value));
helper_function(".zer");
}
break;
}
case op_asp:
{
switch (value)
{
case 0:
break;
case -1:
case -2:
case -4:
case -8:
push(new_anyir(-value));
break;
default:
while ((value > 0) && (stackptr > 0))
{
int s = peek(0);
if (s > value)
s = value;
pop(s);
value -= s;
}
appendir(
new_ir1(
IR_STACKADJUST, EM_pointersize,
new_wordir(value)
)
);
break;
}
break;
}
2016-10-22 09:26:28 +00:00
case op_ass:
appendir(
new_ir1(
IR_STACKADJUST, EM_pointersize,
pop(value)
)
);
break;
case op_ret:
{
if (value > 0)
{
struct ir* retval = pop(value);
materialise_stack();
appendir(
new_ir1(
IR_SETRET, value,
retval
)
);
}
if (!current_proc->exit)
{
current_proc->exit = bb_get(NULL);
array_append(&current_proc->blocks, current_proc->exit);
/* This is actually ignored --- the entire block gets special
* treatment. But a lot of the rest of the code assumes that
* all basic blocks have one instruction, so we insert one. */
array_append(&current_proc->exit->irs,
new_ir0(
IR_RET, 0
)
);
}
appendir(
new_ir1(
IR_JUMP, 0,
new_bbir(current_proc->exit)
)
);
break;
}
case op_lfr:
{
push(
appendir(
new_ir0(
IR_GETRET, value
)
)
);
break;
}
case op_csa:
{
struct ir* descriptor = pop(EM_pointersize);
struct ir* targetvalue = appendir(pop(EM_pointersize));
struct jumptable jumptable = {};
int i;
if (descriptor->opcode != IR_LABEL)
fatal("csa is only supported if it refers "
"directly to a descriptor block");
parse_csa(bb_get(descriptor->u.lvalue), &jumptable);
emit_jumptable(targetvalue, &jumptable);
break;
}
case op_csb:
{
struct ir* descriptor = pop(EM_pointersize);
struct ir* targetvalue = appendir(pop(EM_pointersize));
struct jumptable jumptable = {};
int i;
if (descriptor->opcode != IR_LABEL)
fatal("csb is only supported if it refers "
"directly to a descriptor block");
parse_csb(bb_get(descriptor->u.lvalue), &jumptable);
emit_jumptable(targetvalue, &jumptable);
break;
}
case op_sar:
case op_lar:
case op_aar:
{
const char* helper;
if (value != EM_wordsize)
fatal("sar/lar/aar are only supported when using "
"word-size descriptors");
switch (opcode)
{
case op_sar: helper = ".sar4"; break;
case op_lar: helper = ".lar4"; break;
case op_aar: helper = ".aar4"; break;
}
materialise_stack();
2016-10-24 18:15:22 +00:00
/* No push here, because the helper function leaves the result on
* the physical stack (which is very dubious). */
appendir(
new_ir1(
IR_CALL, 0,
2016-10-24 18:15:22 +00:00
new_labelir(helper)
)
);
break;
}
case op_lxl:
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
push(
walk_static_chain(value)
);
break;
case op_lxa:
push(
new_ir1(
IR_FPTOAB, EM_pointersize,
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
walk_static_chain(value)
)
);
break;
2016-10-17 22:31:26 +00:00
case op_fef:
{
struct ir* f = pop(value);
/* fef is implemented by calling a helper function which then mutates
* the stack. We read the return values off the stack when retracting
* the stack pointer. */
push(f);
push(new_wordir(0));
2016-10-17 22:31:26 +00:00
materialise_stack();
appendir(
new_ir1(
IR_CALL, 0,
new_labelir((value == 4) ? ".fef4" : ".fef8")
2016-10-17 22:31:26 +00:00
)
);
/* exit, leaving an int and then a float (or double) on the stack. */
2016-10-17 22:31:26 +00:00
break;
}
case op_fif:
{
/* fif is implemented by calling a helper function which then mutates
* the stack. We read the return values off the stack when retracting
* the stack pointer. */
/* We start with two floats on the stack. */
materialise_stack();
appendir(
new_ir1(
IR_CALL, 0,
new_labelir((value == 4) ? ".fif4" : ".fif8")
)
);
/* exit, leaving two floats (or doubles) on the stack. */
break;
}
2016-10-22 09:26:28 +00:00
case op_lor:
{
switch (value)
{
case 0:
push(
appendir(
new_ir1(
IR_FPTOLB, EM_pointersize,
new_ir0(
IR_GETFP, EM_pointersize
)
)
)
);
break;
2016-10-22 09:26:28 +00:00
case 1:
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
materialise_stack();
push(
appendir(
new_ir0(
IR_GETSP, EM_pointersize
)
2016-10-22 09:26:28 +00:00
)
);
break;
default:
fatal("'lor %d' not supported", value);
}
break;
}
case op_str:
{
switch (value)
{
case 0:
appendir(
new_ir1(
IR_SETFP, EM_pointersize,
pop(EM_pointersize)
)
);
break;
2016-10-22 09:26:28 +00:00
case 1:
appendir(
new_ir1(
IR_SETSP, EM_pointersize,
pop(EM_pointersize)
)
);
break;
default:
fatal("'str %d' not supported", value);
}
break;
}
case op_blm:
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
push(new_wordir(value));
helper_function(".bls4");
break;
2016-10-22 09:26:28 +00:00
case op_bls:
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (value != EM_wordsize)
fatal("'bls %d' not supported", value);
helper_function(".bls4");
2016-10-22 09:26:28 +00:00
break;
case op_los:
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (value != EM_wordsize)
fatal("'los %d' not supported", value);
helper_function_with_arg(".los4", pop(EM_wordsize));
break;
case op_sts:
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
if (value != EM_wordsize)
fatal("'sts %d' not supported", value);
helper_function_with_arg(".sts4", pop(EM_wordsize));
break;
2016-10-24 18:15:22 +00:00
case op_lin:
{
/* Set line number --- ignore. */
break;
}
default:
fatal("treebuilder: unknown ivalue instruction '%s'",
em_mnem[opcode - sp_fmnem]);
}
}
static void insn_lvalue(int opcode, const char* label, arith offset)
{
switch (opcode)
{
case op_lpi:
case op_lae:
push(
address_of_external(label, offset)
);
break;
case op_loe:
push(
new_ir1(
IR_LOAD, EM_wordsize,
address_of_external(label, offset)
)
);
break;
case op_lde:
push(
new_ir1(
IR_LOAD, EM_wordsize*2,
address_of_external(label, offset)
)
);
break;
case op_ste:
sequence_point();
appendir(
new_ir2(
IR_STORE, EM_wordsize,
address_of_external(label, offset),
pop(EM_wordsize)
)
);
break;
case op_sde:
sequence_point();
appendir(
new_ir2(
IR_STORE, EM_wordsize*2,
address_of_external(label, offset),
pop(EM_wordsize*2)
)
);
break;
case op_zre:
sequence_point();
appendir(
new_ir2(
IR_STORE, EM_wordsize,
address_of_external(label, offset),
new_wordir(0)
)
);
break;
2016-10-17 22:31:26 +00:00
case op_ine:
sequence_point();
2016-10-17 22:31:26 +00:00
appendir(
new_ir2(
IR_STORE, EM_wordsize,
address_of_external(label, offset),
new_ir2(
IR_ADD, EM_wordsize,
new_ir1(
IR_LOAD, EM_wordsize,
address_of_external(label, offset)
),
new_wordir(1)
)
)
);
break;
case op_dee:
sequence_point();
2016-10-17 22:31:26 +00:00
appendir(
new_ir2(
IR_STORE, EM_wordsize,
address_of_external(label, offset),
new_ir2(
IR_ADD, EM_wordsize,
new_ir1(
IR_LOAD, EM_wordsize,
address_of_external(label, offset)
),
new_wordir(-1)
)
)
);
break;
case op_cal:
assert(offset == 0);
materialise_stack();
appendir(
new_ir1(
IR_CALL, 0,
new_labelir(label)
)
);
break;
case op_bra:
assert(offset == 0);
materialise_stack();
appendir(
new_ir1(
IR_JUMP, 0,
new_labelir(label)
)
);
break;
case op_gto:
{
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
struct ir* descriptor = address_of_external(label, offset);
appendir(
new_ir1(
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
IR_SETFP, EM_pointersize,
load(EM_pointersize, descriptor, EM_pointersize*2)
)
);
appendir(
new_ir1(
Teach mcg to pass our tests. Tests pass if one edits the top build.lua to uncomment "qemuppc" from both vars.plats and vars.plats_with_tests, and one leaves mcg in plat/qemuppc/descr. Add or correct some EM instructions in treebuilder.c: - "lof", "stf": handle negative offsets in load() and store(). - "cuu": add using IR_FROMUI. - "lim", "sim": keep an entire word in ".ignmask", to be compatible with mach/powerpc/libem/trp.s and ncg. We also keep a word in ".ignmask" in ncg for both i386 and m68020. - "trp": pass trap number in register. See comment in helper_function_with_arg(). - "sig": push the old value of .trppc on the stack. - "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?": connect to helper functions in libem. - "blm", "bls": drop call to memmove() and use new helper ".bls4", because tests/plat/structcopy_e.c can't call memmove(). - "xor s", "cms s": if s is large, fall back on helper function. - "rol", "ror": add by decomposing each rotate into 4 IR ops. - "rck s", "bls s": make fatal unless s is word size. - "loi": push multiple loads in the correct order. - "dup s", "exg s": if s is large, fall back on helper. - "dus": add using new helper ".dus4". - "lxl", "lxa": follow the static chain, not the dynamic chain. - "lor 1": materialise the stack before pushing the stack pointer. - "lor 2", "str 2": make fatal. - "los", "sts": drop calls to memcpy() and use helpers ".los4" and and ".sts4", so lang/m2/libm2/LtoUset.e starts working. - "gto": correctly read descriptor. Change mach/powerpc/mcg/table: - ANY.L: add for "asp -8". - LOAD.L: work around register corruption. - COMPAREUL.I: add for "cms 8".
2018-01-30 20:53:26 +00:00
IR_SETSP, EM_pointersize,
load(EM_pointersize, descriptor, EM_pointersize*1)
)
);
appendir(
new_ir1(
IR_JUMP, 0,
load(EM_pointersize, descriptor, EM_pointersize*0)
)
);
break;
}
case op_fil:
{
/* Set filename --- ignore. */
break;
}
default:
fatal("treebuilder: unknown lvalue instruction '%s'",
em_mnem[opcode - sp_fmnem]);
}
}
static void generate_tree(struct basicblock* bb)
{
int i;
tracef('0', "0: block %s\n", bb->name);
current_bb = bb;
reset_stack();
for (i=0; i<bb->ems.count; i++)
{
struct em* em = bb->ems.item[i];
tracef('E', "E: read %s ", em_mnem[em->opcode - sp_fmnem]);
switch (em->paramtype)
{
case PARAM_NONE:
tracef('E', "\n");
insn_simple(em->opcode);
break;
case PARAM_IVALUE:
tracef('E', "value=%d\n", em->u.ivalue);
insn_ivalue(em->opcode, em->u.ivalue);
break;
case PARAM_LVALUE:
tracef('E', "label=%s offset=%d\n",
em->u.lvalue.label, em->u.lvalue.offset);
insn_lvalue(em->opcode, em->u.lvalue.label, em->u.lvalue.offset);
break;
case PARAM_BVALUE:
tracef('E', "true=%s", em->u.bvalue.left->name);
if (em->u.bvalue.right)
tracef('E', " false=%s", em->u.bvalue.right->name);
tracef('E', "\n");
insn_bvalue(em->opcode, em->u.bvalue.left, em->u.bvalue.right);
break;
default:
assert(0);
}
if (tracing('E'))
print_stack();
}
/* Yes, we are allowed to leave stuff on the stack at the end of the procedure.
* It's discarded as part of the function return. */
}
void tb_procedure(void)
{
int i;
for (i=0; i<current_proc->blocks.count; i++)
generate_tree(current_proc->blocks.item[i]);
}
static void parse_csa(struct basicblock* data_bb, struct jumptable* table)
{
struct em* em;
int lowerbound;
int count;
int i;
assert(data_bb->ems.count >= 3);
/* Default target */
em = data_bb->ems.item[0];
assert(em->opcode == op_bra);
assert(em->paramtype == PARAM_BVALUE);
table->defaulttarget = em->u.bvalue.left;
/* Lower bound */
em = data_bb->ems.item[1];
assert(em->opcode == op_loc);
assert(em->paramtype == PARAM_IVALUE);
lowerbound = em->u.ivalue;
/* Count */
em = data_bb->ems.item[2];
assert(em->opcode == op_loc);
assert(em->paramtype == PARAM_IVALUE);
count = em->u.ivalue + 1; /* value in descriptor is inclusive */
assert(data_bb->ems.count >= (count + 3));
/* Now, each target in turn. */
for (i=0; i<count; i++)
{
struct basicblock* target;
em = data_bb->ems.item[3 + i];
assert(em->opcode == op_bra);
assert(em->paramtype == PARAM_BVALUE);
target = em->u.bvalue.left;
imap_put(&table->targets, lowerbound+i, target);
}
}
static void parse_csb(struct basicblock* data_bb, struct jumptable* table)
{
struct em* em;
int count;
int i;
assert(data_bb->ems.count >= 2);
/* Default target */
em = data_bb->ems.item[0];
assert(em->opcode == op_bra);
assert(em->paramtype == PARAM_BVALUE);
table->defaulttarget = em->u.bvalue.left;
/* Number of targets */
em = data_bb->ems.item[1];
assert(em->opcode == op_loc);
assert(em->paramtype == PARAM_IVALUE);
count = em->u.ivalue;
assert(data_bb->ems.count >= (count*2 + 2));
/* Now, each target in turn. */
for (i=0; i<count; i++)
{
int value;
struct basicblock* target;
em = data_bb->ems.item[2 + i*2];
assert(em->opcode == op_loc);
assert(em->paramtype == PARAM_IVALUE);
value = em->u.ivalue;
em = data_bb->ems.item[3 + i*2];
assert(em->opcode == op_bra);
assert(em->paramtype == PARAM_BVALUE);
target = em->u.bvalue.left;
imap_put(&table->targets, value, target);
}
}
static void emit_jumptable(struct ir* targetvalue, struct jumptable* jumptable)
{
int i;
materialise_stack();
for (i=0; i<jumptable->targets.count; i++)
{
int value = jumptable->targets.item[i].left;
struct basicblock* target = jumptable->targets.item[i].right;
struct basicblock* nextblock = bb_get(NULL);
array_append(&current_proc->blocks, nextblock);
appendir(
new_ir2(
IR_CJUMPEQ, 0,
new_ir2(
IR_COMPARESI, EM_wordsize,
targetvalue,
new_wordir(value)
),
new_ir2(
IR_PAIR, 0,
new_bbir(target),
new_bbir(nextblock)
)
)
);
current_bb = nextblock;
}
appendir(
new_ir1(
IR_JUMP, 0,
new_bbir(jumptable->defaulttarget)
)
);
}
/* vim: set sw=4 ts=4 expandtab : */