67 lines
2.1 KiB
Plaintext
67 lines
2.1 KiB
Plaintext
|
VideoCore IV support in the ACK
|
||
|
|
===============================
|
||
|
|
|
||
|
|
This is a fairly crude port of the ACK to produce VideoCore IV machine
|
||
|
|
code, suitable for use on the Raspberry Pi. It produces terrible but
|
||
|
|
working code. The resulting binaries can be used either bare metal or
|
||
|
|
loaded as a GPU kernel and executed using a modified mailbox.c (see below).
|
||
|
|
|
||
|
|
As much of the standard C library as is relevant works; if
|
||
|
|
you're running in bare-metal mode, you can hook stdin/stdout up to the
|
||
|
|
mini UART. (Obviously, in kernel mode you can't.)
|
||
|
|
|
||
|
|
Important note! The malloc heap expects your program to be loaded into a
|
||
|
|
chunk of memory that's 256kB large. You must make sure that this is the case,
|
||
|
|
or Bad Stuff will happen.
|
||
|
|
|
||
|
|
Output binaries are fully PIC and can be loaded anywhere (this is one of the
|
||
|
|
things that makes the code so terrible). You must use the pi_user_to_phys()
|
||
|
|
and pi_phys_to_user() to translate pointers from physical to user and vice
|
||
|
|
versa. If you don't, Bad Stuff will happen.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Bare metal mode
|
||
|
|
---------------
|
||
|
|
|
||
|
|
To run a binary bare metal, compile it:
|
||
|
|
|
||
|
|
ack -mrpi -O program.c -o bootcode.bin
|
||
|
|
|
||
|
|
...and copy the bootcode.bin file to the root of an SD card. Boot the Pi.
|
||
|
|
Your program will run.
|
||
|
|
|
||
|
|
To use the UART, #include <pi.h> and call pi_init_uart() at the top of your
|
||
|
|
program. This will set it up and connect it to stdin/stdout. It's 115200 8n1.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Kernel mode
|
||
|
|
-----------
|
||
|
|
|
||
|
|
This will require some hacking at your end.
|
||
|
|
|
||
|
|
Go here, and follow the instructions.
|
||
|
|
|
||
|
|
https://github.com/hermanhermitage/videocoreiv/wiki/VideoCore-IV-Kernels-under-Linux
|
||
|
|
|
||
|
|
Now compile your program:
|
||
|
|
|
||
|
|
ack -mrpi -O program.c -o alpha.bin
|
||
|
|
|
||
|
|
MAKE SURE YOU AREN'T USING ANY MEMORY ALLOCATION. Copy the alpha.bin onto
|
||
|
|
the Pi, and run it with mailbox.c.
|
||
|
|
|
||
|
|
To get data in and out, #include <pi.h> and look at the pi_kernel_parameters
|
||
|
|
variable. It's a structure that is initialised with the data that's passed in
|
||
|
|
from mailbox.c (currently four pointers and two integers).
|
||
|
|
|
||
|
|
If you want to use malloc() and friends, you'll need to hack mailbox.c so
|
||
|
|
that the buffer containing the code is at least 256kB, or you're likely to
|
||
|
|
corrupt the VideoCore's workspace and crash it.
|
||
|
|
|
||
|
|
|
||
|
|
David Given <dg@cowlark.com>
|
||
|
|
2013-05-26
|
||
|
|
|