ack/doc/install.doc

.\" $Header$
.if n .nr PD 1v
.if n .nr LL 78m
.if n .ll 78m
.TL
Amsterdam Compiler Kit Installation Guide
.AU
Ed Keizer
(revised for 3rd and 4th distribution by Ceriel Jacobs)
.AI
Vakgroep Informatica
Vrije Universiteit
Amsterdam
.NH
Introduction
.PP
This document
describes the process of installing Amsterdam Compiler Kit.
It depends on your combination of hard- and software how
hard it will be to install the Kit.
This description is intended for a VAX running BSD 4.1
.UX
\.
Installation on VAX BSD4.2/4.3 systems,
Sun-2 or Sun-3 systems running Release 3.0 or newer, and some System V systems
should be easy.
Installation on PDP 11's running
.UX
Version 7, BSD 2.8, or 2.9
should also be easy, as long
as they have separate instruction and data space.
Installation on machine's without this feature, like PDP 11/34,
PDP 11/60 requires extensive surgery on some programs and is
thought of as impossible.
See section 7 for installation on other systems.
.PP
On small machines, like the PDP-11, the Modula-2 front-end is only available
for 2 byte integer, 2 byte pointer machines, so you can not cross-compile
Modula-2 programs for f.i. a MC68000, on a PDP-11.
.NH
Restoring tree
.PP
The process of installing Amsterdam Compiler Kit is quite simple.
It is important that the original Amsterdam Compiler Kit
distribution tree structure is restored.
Proceed as follows
.IP "  \-" 10
Create a directory, for example /usr/em, on a device
with at least 25 Megabytes left.
.IP "  \-"
Change to that directory (cd ...); it will be the working directory.
.IP "  \-"
Extract all files from the distribution medium, for instance
magtape:
\fBtar x\fP.
.IP "  \-"
Keep a copy of the original distribution to be able to repeat the process
of installation in case of disasters.
This copy is also useful as a reference point for diff-listings.
.LP
.bp
The directories in the tree contain the following information:
.sp 1
.nr PD 0
.IP "bin" 14
.br
the few utilities that knot things together.
See the section about "Commands".
.IP "lib"
.br
root of a tree containing almost all binaries and libraries used by
commands.
All files specific to a certain machine are collected in one subtree
per machine. E.g. "lib/pdp", "lib/z8000".
The names used here are the same names as used for subtrees
of "mach".
.IP "lib/descr"
.br
Command descriptor files used by the program ack.
.IP "lib/LLgen"
.br
Files used by the LL(1) Parser-generator.
.br
.IP "lib/ego"
.br
Files used by the global optimizer.
.br
.IP "etc"
.br
The main description of EM sits here.
Files (e.g. em_table) describing
the opcodes and pseudos in use,
the operands allowed, effect in stack etc. etc.
Make in this directory creates most of the files in "h"
and "util/data".
This make should only be called when the EM definition is
changed.
.IP "include/_tail_cc"
.br
Include files needed by modules
in the C library from lang/cem/libcc.
Especially needed for "stdio".
.IP "include/_tail_mon"
.br
More or less system independent include files needed by modules
in the library lang/cem/libcc/mon.
.IP "h"
.br
The #include files for:
.TS
l l.
arch.h	Definition of the ACK archive format.
as_spec.h	Used by EM assembler and interpreters.
bc_io.h	Used by the Basic run-time system.
bc_string.h	Used by the Basic run-time system.
cg_pattern.h	Used by the backend program "cg" and its bootstrap.
cgg_cg.h	Used by the backend program "ncg" and its bootstrap.
em_abs.h	Contains trap numbers and address for lin and fil
em_flag.h	Definition of bits in array em_flag in lib/em_data.a
	Describes parameters effect on flow of instructions
em_mes.h	Definition of names for mes pseudo numbers
em_mnem.h	instruction => compact mapping.
em_path.h	Pathnames used by \fIack\fP, intended
	for all utilities
em_pseu.h	pseudo instruction => compact mapping
em_ptyp.h	Useful for compact code reading/writing,
	defines classes of parameters
em_reg.h	Definition of mnemonics indicating register type.
em_spec.h	Definition of constants used in compact code
local.h	Various definitions for local versions
pc_err.h	Definitions of error numbers in Pascal
pc_file.h	Macro's used in file handling in Pascal
pc_size.h	Sizes of objects used by Pascal compiler and
	run-time system.
em_reg.h	Definition of names for register types.
ocm_chan.h	Used by the occam run-time system
ocm_parco.h	Used by the occam run-time system
ocm_proc.h	Used by the occam run-time system
m2_traps.h	Used by the Modula-2 run-time system
.TE
.IP "modules"
.br
root of a tree containing modules for compiler writers.
.IP "modules/man"
.br
manual pages for all modules.
.IP "modules/lib"
.br
contains module objects.
.IP "modules/src"
.br
contains sources of the modules, each module in its own directory.
.IP "modules/h"
.br
include files for some of the modules.
.IP "modules/pkg"
.br
include files for some of the modules.
.IP "doc"
.br
This directory contains the unformatted documents for the Kit.
A list of the available documents can be found in the last section.
.IP "doc/em"
.br
The EM-manual IR-81.
.IP "doc/em/int"
.br
The EM interpreter written in Pascal.
.IP "mkun"
.br
The PUBMAC macro package for nroff/troff from the Katholieke Universiteit at
Nijmegen.
It is used for the EM reference manual.
The Makefile installs the macro package in
/usr/lib/tmac.
This package is in the public domain.
.IP "mach"
.br
just there to group the directories with all sources for each machine.
The section about "Machines" of this manual indicates which subdirectories
are used for which systems.
.br
These directories have subdirectories named:
.in +3n
.TS
l l.
cg	the backend   (*.m => *.s)
ncg	the new backend   (*.m => *.s)
as	the assembler (*.s => *.o) or
	assembler/linker (*.s + libraries => a.out)
cv	Conversion programs for a.out files.
dl	Down-load programs
top	the target optimizer

libem	Sources for EM runtime system, only depending on CPU type
libbc	Used to create Basic run-time system and libraries
libcc	Used to create C run-time system and libraries
libpc	Used to create Pascal run-time system and libraries
liboc	Used to create Occam run-time system and libraries
libm2	Used to create Modula-2 run-time system and libraries
libfp	Used to create floating point library
libsys	Sources for system-dependent EM library
test	Various tests

int	Source for an interpreter
.TE
.in -3n
The directory proto contains files used by most machines,
like machine-independent sources and Makefiles.
.in +3n
.TS
l l.
mach/proto/cg	Current backend sources.
mach/proto/ncg	New backend sources.
mach/proto/as	Assembler sources.
mach/proto/top	Target optimizer sources.
mach/proto/fp	FLoating point package sources.
mach/proto/libg	Makefile for compiling libraries.
.TE
.IP "emtest"
.br
Contains prototype of em test set.
.IP "man"
.br
Man files for various utilities
.IP "lang"
.br
Just there to group the directories for all front-ends
.IP "lang/pc"
.br
Pascal front-end
.IP "lang/pc/libpc"
.br
Source of Pascal run-time system (in EM or C)
.IP "lang/pc/test"
.br
Some test programs written in Pascal
.IP "lang/pc/pem"
.br
The Pascal compiler proper
.IP "lang/cem"
.br
C front-end
.IP "lang/cem/libcc"
.br
Directories with sources of C runtime system, libraries (in EM or C)
.IP "lang/cem/libcc/gen"
.br
Sources for routines in chapter III of UNIX programmers manual,
excluding Stdio
.IP "lang/cem/libcc/stdio"
.br
Stdio sources
.IP "lang/cem/libcc/math"
.br
Sources for mathematical routines, normally available with the
\fB-lm\fP option to \fIcc\fP.
.IP "lang/cem/libcc/mon"
.br
Sources for routines in chapter II, written in EM
.IP "lang/cem/cemcom"
.br
The compiler proper
.IP "lang/cem/ctest"
.br
C test set
.IP "lang/cem/ctest/cterr"
.br
Programs developed for pinpointing previous errors
.IP "lang/cem/ctest/ct*"
.br
The test programs.
.IP "lang/basic/src"
.br
The compiler proper.
.IP "lang/basic/lib"
.br
Basic run-time library source.
.IP "lang/basic/test"
.br
Various Basic programs.
.IP "lang/occam"
.br
Occam front-end.
.IP "lang/occam/comp"
.br
The compiler proper.
.IP "lang/occam/lib"
.br
Source of Occam run-time system (in EM or C).
.IP "lang/occam/test"
.br
Some Occam programs.
.IP "lang/m2"
.br
Modual-2 front-end.
.IP "lang/m2/comp"
.br
The compiler proper.
.IP "lang/m2/libm2"
.br
Source of Modula-2 run-time system (in EM, C and Modula-2).
.IP "lang/m2/m2mm"
.br
Modula-2 makefile generator.
.IP "lang/m2/test"
.br
Some Modula-2 example programs.
.IP "util"
.br
Contains directories with sources for various utilities
.IP "util/ack"
.br
The program used for translation with the Kit.
.IP "util/opt"
.br
EM peephole optimizer (*.k => *.m).
.IP "util/ego"
.br
The global optimizer.
.IP "util/topgen"
.br
The target optimizer generator..
.IP "util/misc"
.br
Decode (*.[km] => *.e) + encode (*.e => *.k).
.IP "util/data"
.br
The C-code for `lib/em_data.a`.
These sources are created by the Makefile in `etc`.
.IP "util/ass"
.br
The EM assembler (*.[km] + libraries => e.out).
.IP "util/arch"
.br
The archivers to be used for ALL EM utilities.
.IP "util/cgg"
.br
A program needed for compiling backends.
.IP "util/ncgg"
.br
A program needed for compiling the newest backends.
.IP "util/cpp"
.br
The C preprocessor.
.IP "util/shf"
.br
Various shell files.
.IP "util/LLgen"
.br
The extended LL(1) parser generator.
.IP "util/amisc"
.br
Contains some programs handling ACK a.out format, such as anm, asize.
.IP "util/cmisc"
.br
Contains some programs to help in resolving name conflicts, and
a dependency generator for makefiles.
.IP "util/led"
.br
The ACK link-editor, reading ACK relocatable a.out format, and writing
ACK a.out format.
.IP "util/int"
.br
An EM interpreter, written in C. Very useful for checking out software.
Unfortunately not available for small machines.
.ne 4
.LP
All pathnames mentioned in the text of this document are relative to the
ACK home directory, unless they start with '/'.
.sp 1
.NH
Adapting ACK to your system
.PP
Before compiling the sources in the Kit some installation dependent
actions have to be taken.
Most of these are performed by an interactive shell script in the file
.I first
in a directory of the same name.
.LP
These actions are:
.sp 1
.IP \-
Automatically checking whether you included the ACK bin directory in your
shell PATH.
See also the section on "commands".
.IP \-
Automatically setting the pathname of the parent directory in ../h/em_path.h.
See also the section on "pathnames".
.IP \-
Discovering how to call
.I cc
to get it to include the
.I lex
library.
.IP \-
Asking you for the type of system you have
and creating the shell script "ack_sys" in the Kit's bin directory.
Several utilities make use of "ack_sys" to determine the type of
system you have.
The current choice is between:
.sp 1
.TS
c c c
l l l.
answer	system type	default machine
pdp_v7	PDP11 with sep I/D and version 7	pdp
vax_bsd4_1a	VAX11 with BSD4.1a	vax4
vax_bsd4_2	VAX11 with BSD4.2	vax4
vax_sysV_2	VAX11 with System V.2	vax4
pc_ix	IBM PC with PC/IX	i86
xenix3	IBM AT with Microsoft Xenix V3.2	xenix3
m68_unisoft	Motorola 68000 with Unisoft UNIX	m68k2
m68_pmds	Philips PMDS	pmds
m68_sysV_0	68000 with Uniplus UNIX System V.0	mantra
sun3	Sun 3 Motorola 68020 workstation	sun3
sun2	Sun 2 Motorola 68010 workstation	sun2
SMALL	Neither of the above, small address space	i86
ANY	Neither of the above	m68k2
.TE
.sp 1
For some of these, the installation procedure has not been tested, as
we don't have them.
For others, the installation procedure has only been tested with earlier
distributions, as we don't have those systems anymore.
However,
the pdp_v7, vax_bsd4_1a, sun3 and m68 systems are known to behave
reasonably.
The Sun systems should run Release 3.0 or newer.
For ANY you can use any name you fancy,
but the Kit will not be able to compile programs for your system.
If you want to do that you have to read the section about "compilation
on a different machine".
.IP \-
Automatically setting the default machine for which code is
produced to your own type of system according to the table above.
This in done in the file "h/local.h".
See also the section 8.2.
.IP \-
Automatically editing a few description files that tell
ACK to use your system's assembler.
On the VAX the Kit uses the native assembler and linker.
The description file lib/vax4/descr has to be altered to prevent
attempts to assemble programs with unsuitable assemblers.
The original descr file is copied to descr.orig.
.IP \-
The VAX backend cannot be booted on systems
with a 16-bit address space systems.
The program lib/cgg needs more memory than available to transform
the table into files suitable for the C-compiler.
Therefore files tables1.h and tables1.c have been provided in
the directory mach/vax4/cg.
These must be copied to tables.h and tables.c
to get working code-generators for the VAX on PDP11's.
You will hardly be able to use these, because the 
code generated by these programs cannot be
assembled and loaded without a native VAX assembler,
but its nice to be able to look at the code produced.
The same problem occurs for the m68k2 backend and the m68020 backend,
and the same solution is chosen.
.IP \-
On machines with a 16-bit address space, the C-compiler has no 
builtin preprocessor. Arangements are made to this effect.
.IP \-
On the PDP, 
.I ranlib
is not used, because it does not work properly,
at least, on our 2.9 BSD system it does'nt. 
This is done by creating a dummy shell script
.I ranlib
in the ACK bin directory.
If you are sure that your
.I ranlib
does work properly, you can just remove the shell script before
installing the Kit.
.LP
.sp 1
Some actions still have to be done by hand.
.sp 1
.IP \-
The installation of the PUBMAC macro package is not done
automatically because you need super-user privileges to do
that on most systems.
This macro package is used with several of the documents
provided in the Kit.
.IP \-
UNIX V7 as originally distributed contains a few bugs that
prevent correct execution of some of the larger programs.
See the section named "Fixes for the UNIX V7 system"
about what to do.
Berkeley 2.8 or 2.9 may also have some of these bugs.
.IP \-
The manual files for the Kit can be copied to their
appropriate place in the system by giving the command "make install"
in the man directory, but only 
.B after
running the installation of the
Kit itself.
.NH
Compiling the Kit
.PP
The next step in the installation process is to compile
the sources in the Kit and install them in their places
in the lib and bin directories.
.PP
Most directories containing sources have Makefiles
used to compile and install the programs in that
directory.
All programs needed for compilation and/or cross compilation
with the Kit are installed in the directories "bin" and "lib"
by these Makefiles.
These Makefiles adhere to a standard which is described in the
section 9.
.LP
You do not have to start all these Makefiles separately.
We wrote a shell script calling the make's needed to install
the whole Kit.
This script consists of the file TakeAction in the Kit's root
directory and a few files called Action in some directories.
The Action files describe in a very simple form which actions
have to be performed in which directories.
The default action is to start "make install && make clean".
The output of each make is diverted to a file called "Out"
in the same directory as the make was started in.
If the make was successful (return code 0) the Out file is removed
and the script TakeAction produces a small message telling you
that it succeeded in fulfilling its goal.
If the make was not successful (any other return code) the Out file
is left alone for further examination and a small message telling you
to look at that file is produced by TakeAction.
.LP
For some programs the scripts already know they can't be
installed on your type of system.
In that case they produce a message "Sorry, ....." and
happily proceed with further installation commands.
.PP
Compilation of the whole Kit might take anything from a few
hours to more than a day.
If you do not want to install libraries etc. for a particular
machine you can edit the file Action and comment out the relevant entries.
Lines starting with a '!' are comments.
.PP
If this compilation went reasonably successful you should be able
to use the Kit.
Read the next section and the manuals provided
with the Kit (in the man directory) on how to use it.
.NH 2
Problems you may meet
.NH 3
on Unisoft m68000 systems.
.PP
The Unisoft C compiler has a bug which impedes the correct
translation of the peephole optimizer.
For a more detailed description of this phenomenen see
the file "mach/m68k2/Unisoft_bug".
.NH 3
with backends
.PP
The backends for the PDP11, VAX with BSD4.1, Motorola 68000 and
Intel 8086 have been heavily used by ourselves and are well tested.
The backends for the other machines are known to run our own
test programs,
but might reveal errors when more heavily used.
.NH 2
An example output of TakeAction.
.PP
.DS
System definition -- done
EM definition -- done
LL(1) Parser generator -- done
EM definition library -- done
C utilities -- done
system-call interface module -- done
string routines module -- done
formatted print module -- done
assertion module -- done
memory allocation module -- done
fast, linear time malloc -- done
EM messages generation module -- done
identifier table module -- done
input module -- done
ACK-object reading and writing module -- done
EM-code reading module -- done
EM code generation module -- done
Modules -- done
C preprocessor -- done
ACK object utilities -- done
Encode/Decode -- done
Shell files in bin -- done
EM assembler -- done
EM Peephole optimizer -- done
	.
	.
	.
EM Global optimizer -- done
ACK archiver -- done
Program 'ack' -- done
Bootstrap for backend tables -- done
Bootstrap for newest form of backend tables -- done
LED link editor -- done
TOPGEN target optimizer generator -- done
C frontend -- done
Basic frontend -- done
Occam frontend -- done
Intel 8086 assembler -- done
Intel 8086 backend -- done
Intel 8086 C libraries -- done
Intel 8086 EM library -- done
Intel 8086 Pascal library -- done
Intel 8086 PC/IX systemcall library -- done
Intel 8086 Basic library -- done
Intel 8086 Occam library -- done
Intel 8086 conversion program from ack.out --> PC/IX a.out -- done
Intel 8086 support -- done
	.
	.
	.
Motorola 68000 assembler -- done
Motorola 68000 2-4 backend -- done
Motorola 68000 2-4 conversion program -- done
Motorola 68000 target optimizer -- done
Motorola 68000 2-4 C libraries -- done
Motorola 68000 2-4 EM library -- done
Motorola 68000 2-4 Pascal library -- done
Motorola 68000 2-4 System library -- done
Motorola 68000 2-4 Basic library -- done
Motorola 68000 2-4 Occam library -- done
Sorry, Motorola 68000 interpreters can only be made on m68* systems
Motorola 68000 2-4 support -- done
	.
	.
	.
PDP 11 assembler -- done
PDP 11 backend -- done
PDP 11 target optimizer -- done
Sorry, PDP 11 interpreter can only be made on pdp* systems
Sorry, PDP 11 C libraries can only be made on pdp* systems
Sorry, PDP 11 EM library can only be made on pdp* systems
Sorry, PDP 11 systemcall library can only be made on pdp* systems
Sorry, PDP 11 Pascal library can only be made on pdp* systems
Sorry, PDP 11 Basic library can only be made on pdp* systems
Sorry, PDP 11 Occam library can only be made on pdp* systems
PDP 11 support -- done
	.
	.
	.
Vax 4-4 backend -- done
Sorry, Vax 4-4 C libraries can only be made on vax* systems
Sorry, Vax 4-4 EM library can only be made on vax* systems
Sorry, Vax 4-4 Occam library can only be made on vax* systems
Sorry, Vax 4-4 Basic library can only be made on vax* systems
Sorry, Vax 4-4 systemcall interface can only be made on vax* systems
Vax target optimizer -- done
Vax 4-4 support -- done
M68020 assembler -- done
M68020 backend -- done
M68020 EM library -- done
M68020 system call library -- done
M68020 C libraries -- done
M68020 PC library -- done
M68020 Basic library -- done
M68020 Occam library -- done
Sorry, M68020 VME131 System V/68 R2V2.1 conversion can only be made on m68020 systems
M68020 System V/68 support -- done
Ack.out --> Sun 3 M68020 a.out format conversion program -- done
Sun 3 M68020 systemcall library -- done
Sun 3 M68020 C libraries -- done
Sun 3 M68020 support -- done
Ack.out --> Sun 2 M68000 a.out format conversion program -- done
Sun 2 M68000 systemcall library -- done
Sun 2 M68000 C libraries -- done
Sun 2 M68000 support -- done
	.
	.
	.
Failed for Pascal frontend, see lang/pc/pem/Out
.DE
.PP
The lines starting with "Sorry, " tell you that certain programs cannot
be translated on your machine.
The lines starting with "Failed for" tell
you that certain programs/libraries which were expected to,
but did not compile.
Only the Pascal frontend failed to compile in this example.
If you want to repeat a certain part of the installation, look in
the Action file for the directory in which that part is to be found.
If that directory contains an Action file issue the command
"sh EM_DIR/TakeAction", otherwise type "make install".
.NH
Commands
.PP
The following commands are available in the bin directory after compilation
of the Kit:
.sp 1
.IP "\fIack\fP, \fIacc\fP, \fIabc\fP, \fIapc\fP, \fIocm\fP, \fIm2\fP and their links"
.br
The names mentioned here can be used to compile Pascal, C, etc... programs.
Most of the links can be used to generate code for a particular
machine.
See also the section about "Machines".
.IP \fIarch\fP
.br
The archiver used for the EM- and universal assembler/loader.
.IP \fIaal\fP
.br
The archiver used for ACK objects.
.IP \fIem\fP
.br
This program selects a interpreter to execute an e.out file.
Interpreters exist for PDP-11 and Motorola 68000 systems.
.IP \fIeminform\fP
.br
The program to unravel the post-mortem information of
the EM interpretator for the PDP-11.
.IP \fILLgen\fP
.br
The LL(1) parser generator.
.IP \fIack_sys\fP
.br
A shell script producing an identification of your system.
Used by some utilities to determine what is, and what is
not feasible on your system. (Like translating PDP assembly).
.IP \fImarch\fP
.br
A shell script used while compiling libraries.
.IP "\fIasize\fP, \fIanm\fP, \fIastrip\fP"
.br
Do the same as \fIsize\fP, \fInm\fP and \fIstrip\fP, but for ACK object format.
.IP \fImkdep\fP
.br
A dependency generator for makefiles.
.IP "\fIcid\fP, \fIprid\fP, \fIcclash\fP"
.br
Some utilities for handling name clashes in C programs. Some
systems have C-compilers with only 7 or 8 characters significant in
identifiers.
.IP "\fItabgen\fP
.br
A utility for generating character tables for C-programs.
.IP \fIint\fP
.br
An EM interpreter. This one is written in C, and is very useful for checking
out programs.
.sp 1
.LP
We currently make the Kit available to our users by telling
them that they should include the bin directory of the Kit in
their PATH shell variable.
The programs will still work when moved to a different
directory or linked to.
Copying should preferably be done with tar, since links are
heavily used.
Renaming of the programs linked to \fIack\fP will not always
produce the desired result.
This program uses its call name as an argument.
Any call name not being \fIcc\fP, \fIacc\fP, \fIabc\fP, \fIpc\fP,
\fIocm\fP, \fIm2\fP, or \fIapc\fP will be
interpreted as the name of a 'machine description' and the
program will try to find a description file with that name.
The installation process will only touch the utilities in the Kit's bin
directory, not your own copies.
.NH
Machines
.PP
Underneath you will find a table with entries for all commands in
the bin directory used to (cross)compile for a particular machine.
The name in the first column give the name in the bin directory.
The column headed dir indicates which subdirectories of
lib are needed for compilation.
The column head i/p contains the integer and pointer size used in units of
bytes.
The subdirectories with the same name in mach contain the sources.
A * in the column headed 'fp' indicates that floating point can be used
for that particular machine. A + in that column indicates that floating
point is only available under the '-fp' option. In this case, software
floating point emulation is used.
.TS
c c c c c c c
l l l l l l l.
command	system	i/p	languages	fp	dir	remarks

pdp	PDP/UNIX V7	2/2	C	*	pdp	needs sep. I/D
			Pascal			No assembler
			Basic
			Occam
			Modula-2

vax4	VAX/BSD 4.?	4/4	C	*	vax4	No assembler
	System V.2		Pascal
			Basic
			Occam
			Modula-2

m68k2	M68000/Unisoft	2/4	C	+	m68k2
			Pascal
			Basic
			Occam
			Modula-2

m68k4	M68000/Unisoft	4/4	C	+	m68k4
			Pascal		m68k2
			Basic
			Occam
			Modula-2

pmds	M68000/PMDS	2/4	C	+	pmds	Philips Micro
			Pascal		m68k2	Devel. System
			Basic
			Occam
			Modula-2

pmds4	M68000/PMDS	4/4	C	+	pmds4	Philips Micro
			Pascal		m68k2	Devel. System
			Basic		m68k4
			Occam
			Modula-2

mantra	M68000/SysV.0	4/4	C	+	mantra
			Pascal		m68k2
			Basic		m68k4
			Occam
			Modula-2

m68020	M68020/V/68	4/4	C	+	m68020
	R2V2.1		Pascal
			Basic
			Occam
			Modula-2

sun3	SUN 3 R3.0	4/4	C	+	sun3
			Pascal		m68020
			Basic
			Occam
			Modula-2

sun2	SUN 2 R3.0	4/4	C	+	sun2
			Pascal		m68k4
			Basic		m68k2
			Occam
			Modula-2

i86	IBM PC/IX	2/2	C	+	i86	IBM PC with PC/IX
			Pascal			Causes kernel crashes
			Basic
			Occam
			Modula-2

xenix3	Microsoft Xenix V3	2/2	C	+	xenix3	IBM AT with Xenix
			Pascal		i86
			Basic
			Occam
			Modula-2

minix	Minix PC	2/2	C	+	minix	IBM PC running Minix
			Pascal		i86
			Basic
			Occam
			Modula-2

minixST	ST Minix	2/4	C	+	minixST	Atari ST running Minix
			Pascal		m68k2
			Basic
			Occam
			Modula-2

z8000	Zilog 8000	2/2	C		z8000	Central Data
			Pascal			CPU board
			Basic			Uses assembler/loader
			Occam
			Modula-2

em22	EM machine	2/2	C	*	em22	Needs interpreter
			Pascal
			Basic
			Occam
			Modula-2

em24	EM machine	2/4	C	*	em24	Needs interpreter
			Pascal
			Basic
			Occam
			Modula-2

em44	EM machine	4/4	C	*	em44	Needs interpreter
			Pascal
			Basic
			Occam
			Modula-2

6500	6502/BBC	2/2	C		6500	Uses assembler/loader
			Pascal
			Basic
			Occam
			Modula-2

6800	Bare 6800				6800	Assembler only

6805	Bare 6805				6805	Assembler only

6809	Bare 6809				6809	Assembler only

ns	Bare NS16032	4/4	C		ns
			Pascal
			Basic
			Occam
			Modula-2

i80	Hermac/z80	2/2	C		i80
			Pascal
			Basic
			Occam
			Modula-2

z80	Hermac/z80	2/2	C		z80	\fIi80\fP is faster
			Pascal
			Basic
			Occam
			Modula-2

s2650	Signetics 2650				s2650	Assembler only
.TE
.PP
The commands \fBem22\fP, \fBem24\fP and \fBem44\fP
produce e.out files with EM machine code which must be interpreted.
The Kit contains three interpreters: one running under PDP 11/V7 UNIX,
one for the M68000, running under the PMDS system, SUN systems, 
the Mantra system, etc, and one, written in C and running on large machines.
The first one can only interpret 2/2 e.out files,
the second takes 2/4 and 4/4 files,
and the last one takes 2/2, 2/4 and 4/4.
The PDP 11 interpreter executes floating point instructions.
The interpreter for the M68000 traps if you try to use floating point.
.LP
The program \fBem\fP in the bin directory calls the appropriate
interpreter.
The interpreters are sought in the em22, em24 and em44
subdirectories of lib.
The third interpreter is available on large machines as the program \fIint\fP
in the bin directory.
.NH
Compilation on a different machine.
.PP
The Kit be installed and used as a cross-compiler
for C and Basic programs on any UNIX machine.
The presence of most UNIX utilities is essential for compilation.
A few of the programs you certainly need are: C-compiler, Yacc, sed,
make and lex.
Except for the Pascal compiler proper all programs 
can be translated on a normal UNIX system, like V7, BSD4.1.
.NH 2
Backend
.PP
The existence of a backend with a system call library
for your system is essential
if you wish to produce executable files for that system.
Rewriting the system call library if the one supplied does
not work on your system is fairly straightforward.
If no backend exists for your CPU type you have to write one yourself
which is a major undertaking.
.NH 2
Pascal
.PP
When you can produce executable code it is also possible to boot the Pascal
Compiler,
which is written in Pascal itself.
The Kit contains the compact code files for the 2/2, 4/4 and 2/4
versions of the Pascal compiler.
The Makefile automatically tries to boot the Pascal compiler
from one of these compact code files, if the compiler proves
unable to compile itself.
.NH 2
Universal assembler/loader, link editor
.PP
The native assemblers and loaders are used on PDP-11 and VAX.
The description files in lib/*/descr for other systems use our
universal assembler and for most machines our link editor.
The load file produced is not directly
usable in any system known to us,
but has to be converted before it can be put to use.
The \fIcv\fP programs convert our a.out format into
executable files.
The \fIdl\fP programs present for some machines unravel
our a.out files and transmit commands to load memory
to a microprocessor over a serial line.
The file man/ack.out.5 contains a description of the format of
the universal assembler load file.
It might be useful to those who wish or need to write their
own conversion programs.
Also, a module is included to read and write our a.out format.
See modules/man/object.3.
.NH 2
Compiling libraries
.PP
The Kit contains sources for part II and III of the C-library.
These files can be used to make libraries for the Ack C-compiler.
The recompilation process uses a few include files.
The include directory in the EM home directory contains the include files
it needs.
An effort has been made to make the part III stuff as system independent as
possible.
.NH
Options
.NH 2
Default machine
.PP
There is one important option in h/local.h.
The utility \fIack\fP uses a default machine name when called
as \fIacc\fP, \fIcc\fP, \fIabc\fP, \fIapc\fP, \fIpc\fP, \fIocm\fP,
\fIm2\fP, or \fIack\fP.
The machine name used for default is determined by the
definition of ACKM in h/local.h.
The Kit is distributed with "vax4" as the default machine,
but the shell script "first" in the directory "first" alters this
to suit your own system.
There is nothing against using the Kit as a cross-compiler
and by default produce code that can't run on your own system.
But...., you have to alter the Makefile for the Pascal frontend
in that case.
That Makefile assumes that calling \fBapc\fP and \fBacc\fP will
produce a.out's that can run on your own system.
Change the definitions of ACC and APC in that Makefile according to your
needs.
.NH 2
Pathnames
.PP
Absolute pathnames are concentrated in "h/em_path.h".
Only the Pascal runtime system and the utilities \fIack\fP and \fILLgen\fP use
absolute pathnames to access files in the Kit.
The tree is distributed with /usr/em as the working
directory.
The definition of EM_DIR in em_path.h should be altered to
specify the root
directory for the Compiler Kit distribution on your system.
This is done automatically the the shell script "first" in the
directory "first".
Em_path.h also specifies which directory should be used for
temporary files.
Most programs from the Kit do indeed use that directory
although some remain stubborn and use /tmp or /usr/tmp.
.LP
The shape of the tree should not be altered lightly because
most Makefiles and the
utility \fIack\fP know the shape of the ACK tree.
All pathnames in all Makefiles are relative, that is do not
have "/" as the first character.
The knowledge of the utility \fIack\fP about the shape of the tree is
concentrated in the files in the directory lib/*/descr and lib/descr/*.
.NH
Makefiles
.PP
Most directories contain a "Makefile".
Apart from commands applying to that specific directory these
files all recognize a few special commands.
When called with one of these they will apply the command to
their own directory and all subdirectories.
The special commands are:
.sp 1
.IP "install" 20
recompile and install all binaries and libraries.
.br
Some Makefiles allow errors to occur in the programs they call.
They ignore such errors and notify the user with the message
"~....... error code n: ignored".
Whenever such a message appears in the output you can ignore it
too.
.IP "cmp"
recompile all binaries and libraries and compare them to the
ones already installed.
.IP pr
print the sources and documentation on the standard output.
.IP opr
make pr | opr
.br
Opr should be an off-line printer daemon.
On some systems it exists under another name e.g. lpr.
The easiest way to call such a spooler is using a shell script
with the name opr that calls lpr.
This script should be placed in /usr/bin or EM_DIR/bin or
one of the directories in your PATH.
.IP clean
remove all files not needed for day-to-day use,
that is binaries not in bin or lib, object files etc.
.LP
Example:
.nf
.sp 1
        make install
.sp 1
.fi
given as command in the home directory will cause
compilation of all programs in the directory and copying of the results
to the bin and lib directories.
.NH
Fixes for the UNIX V7 system
.PP
UNIX System V7 has a few bugs that prevent a part of or the whole Kit
from working properly. Berkeley 2.8 and/or 2.9 may also suffer from this
problem.
To be honest, we do not know which of the following changes are
essential to the functioning of our Kit. The change to "ld" is.
.PP
The file "doc/v7bugs.doc" gives for each of the following bugs
a small test program and a diff listing of the source files that have to be
modified.
.IP 1
Bug in the C optimizer for unsigned comparison
.nr PD 0
.IP 2
The loader 'ld' fails for large data and text portions
.IP 3
Floating point registers are not saved if more memory is needed.
.IP 4
Floating point registers are not copied to child in fork().
.nr PD 1v
.LP
Use the test programs to see if the errors are present in your system
and to check if the modifications are effective.
.PP
You may also have to change /usr/src/cmd/cc.c (/bin/cc) to pass the
.B -i
flag to
.I ld.
Also, /usr/src/cmd/ld.c (/bin/ld) may have to be changed to increase the
number of library positions it can hold.
On our (2.9 BSD) version, this is the constant
.I NROUT.
It must be at least 400.
This may require separate I&D.
Also, our version does not check that the table does not overflow.
.NH
Testing
.PP
Test sets are available in Pascal, C, Basic and EM assembly.
.IP em 8
.br
The directory emtest contains a few EM test programs.
The EM assembly files in these tests must be transformed into
load files.
These tests use the LIN and NOP instructions to mark the passing of each
test.
The NOP instruction prints the current line number during the
test phase.
Each test notifies its correctness by calling LIN with a unique
number followed by a NOP which prints this line number.
The test finishes normally with 0 as the last number printed
In all other cases a bug showed its
existence.
.IP Pascal
.br
The directory lang/pc/test contains a few Pascal test programs.
All these programs print the number of errors found and a
identification of these errors.
.sp 1
.ti +4
We also tested Pascal with the Validation Suite.
The Validation Suite is a collection of more than 200 Pascal programs,
designed by Brian Wichmann and Arthur Sale to test Pascal compilers.
We are not allowed to distribute it, but you may
request a copy from
.DS
Richard J. Cichelli
A.N.P.A.
1350 Sullivan Trail
P.O. Box 598
Easton, Pennsylvania 18042
USA
.DE
.IP C
.br
The sub-directories in lang/cem/ctest contain C test programs.
The idea behind these tests is:
when you have a program called xx.c, compile it into xx.cem.
Run it with standard output to xx.cem.r, compare this file to
xx.cem.g, a file containing the 'ideal' output.
Any differences will point to implementation differences or
bugs.
Giving the command "run gen" or plain "run" starts this
process.
The differences will be presented on standard output.
The contents of the result files depend on the wordsize,
the xx.cem.g files on the distribution are intended for a
32-bit machine.
.IP Basic
.br
The directory lang/basic/test contains some forty basic programs.
Not all of these programs are correct, some have syntactic errors,
some simply don't work.
The Makefile in that directory attempts to compile and run
these tests.
If it compiles its output is compared to a file with suffix .g
which contains the output to be expected.
The make should be started with its standard input diverted
to /dev/null.
An example of the output of a make is present in the file Out.std.
.NH
Documentation
.PP
Manual pages for Amsterdam Compiler Kit can be copied
to "/usr/man/man?" by the
following commands:
.DS
cd man
make install
.DE
but do this \fBafter\fR compiling the Kit.
.LP
Several documents are provided:
.TS
l l.
doc/toolkit.doc	general overview (CACM article)
doc/em	description of the EM machine architecture
doc/ack.doc	format of machine description files (lib/*/descr)
doc/basic.doc	Basic reference manual
doc/pcref.doc	Pascal-frontend reference manual
doc/val.doc	results of running the Pascal Validation Suite
doc/crefman.doc	C-frontend description
doc/LLgen	description of the LL(1) parser generator
doc/peep.doc	internal documentation for the peephole optimizer
doc/cg.doc	documentation for backend writers and maintainers
doc/regadd.doc	addendum to previous document describing register variables
doc/ncg.doc	documentation for the newest backends
doc/v7bugs.doc	bugs in the V7 system and how to fix them
doc/6500.doc	MSC 6500 backend description
doc/i80.doc	Intel 8080 backend description
doc/z80.doc	Zilog Z80 backend description
doc/m68020.doc	Motorola M68000/M68020 backend description
doc/occam	Occam-frontend description
doc/ego	Global Optimizer description
doc/top	Target Optimizer description
doc/int	description of the EM interpreter written in C
doc/m2ref.doc	Modula-2 frontend description
doc/install.doc	this document
doc/install.pr	this document (formatted)
.TE
.PP
The names in this list without a suffix are in fact a subdirectory.
Use the Makefile to get readable copies.
.LP
Good luck.