Merge from master.

README

@@ -2,7 +2,7 @@
                      ===================================
 
                   © 1987-2005 Vrije Universiteit, Amsterdam
-                                2022-06-18
+                                2022-08-19
 
 
 INTRODUCTION
@@ -38,6 +38,7 @@ cpm           produces i80 CP/M .COM files
 rpi           produces Raspberry Pi GPU binaries
 pdpv7         produces PDP/11 V7 Unix binaries
 msdos86       produces i86 MS-DOS .COM files
+msdos386      produces i386 MS-DOS 32-bit DPMI .EXE files
 
 
 

build.lua

@@ -12,6 +12,7 @@ vars.plats = {
 	"linuxppc",
 	"linuxmips",
 	"msdos86",
+	"msdos386",
 	"osx386",
 	"osxppc",
 	"pc86",

first/build.lua

@@ -225,7 +225,7 @@ definerule("cprogram",
 		commands = {
 			type="strings",
 			default={
-				"$(CC) $LDFLAGS -o %{outs[1]} %{ins} %{ins}"
+				"$(CC) $(LDFLAGS) -o %{outs[1]} %{ins} %{ins}"
 			},
 		}
 	},

mach/i386/as/mach3.c

@@ -184,10 +184,13 @@
 {0,	NOOP_1,		0155,		"ins"},
 {0,	NOOP_1,		0252,		"stosb"},
 {0,	NOOP_1,		0253,		"stos"},
+{0,	NOOP_1,		0253,		"stosw"},
 {0,	NOOP_1,		0254,		"lodsb"},
 {0,	NOOP_1,		0255,		"lods"},
+{0,	NOOP_1,		0255,		"lodsw"},
 {0,	NOOP_1,		0256,		"scasb"},
 {0,	NOOP_1,		0257,		"scas"},
+{0,	NOOP_1,		0257,		"scasw"},
 {0,	NOOP_1,		0311,		"leave"},
 {0,	NOOP_1,		0316,		"into"},
 {0,	NOOP_1,		0317,		"iret"},

mach/i386/as/mach5.c

@@ -11,7 +11,7 @@
 void ea_1_16(int param)
 {
         reg_1 &= 0377;
-        if ((reg_1 & 070) || (param & ~070)) {
+        if (param & ~070) {
                 serror("bad operand");
         }
         emit1(reg_1 | param);
@@ -578,3 +578,6 @@ void imul(int reg)
         }
         else badsyntax();
 }
+
+// vim: ts=8 sw=8 et
+

mach/proto/as/comm7.c

@@ -86,6 +86,9 @@ char* remember(char* s)
 
 int combine(int typ1, int typ2, int op)
 {
+	typ1 &= ~S_VAR;
+	typ2 &= ~S_VAR;
+
 	switch (op)
 	{
 		case '+':

mach/proto/fp/build.lua

@@ -78,7 +78,7 @@ for _, plat in ipairs({"cpm"}) do
 			},
 			outleaves = { n..".s" },
 			commands = {
-				"$LUA %{ins[1]} <%{ins[2]} >%{outs}"
+				"$(LUA) %{ins[1]} <%{ins[2]} >%{outs}"
 			}
 		}
 	end

modules/src/em_code/build.lua

@@ -8,7 +8,7 @@ normalrule {
 	},
 	outleaves = { "em_codeEK.h" },
 	commands = {
-		"$LUA %{ins[1]} < %{ins[3]} > %{outs}",
+		"$(LUA) %{ins[1]} < %{ins[3]} > %{outs}",
 		"cat %{ins[4]} >> %{outs}"
 	}
 }

modules/src/em_data/build.lua

@@ -23,7 +23,7 @@ for _, f in ipairs(GENFILES) do
 			"h+emheaders"
 		},
 		commands = {
-			"$LUA %{ins[1]} < %{ins[3]} > %{outs}"
+			"$(LUA) %{ins[1]} < %{ins[3]} > %{outs}"
 		}
 	}
 end

modules/src/read_em/build.lua

@@ -7,7 +7,7 @@ normalrule {
 	},
 	outleaves = "C_mnem_narg.h",
 	commands = {
-		"$LUA %{ins[1]} < %{ins[3]} > %{outs}"
+		"$(LUA) %{ins[1]} < %{ins[3]} > %{outs}"
 	}
 }
 	
@@ -20,7 +20,7 @@ normalrule {
 	},
 	outleaves = "C_mnem.h",
 	commands = {
-		"$LUA %{ins[1]} < %{ins[3]} > %{outs}"
+		"$(LUA) %{ins[1]} < %{ins[3]} > %{outs}"
 	}
 }
 	

plat/msdos/include/ack/plat.h

@@ -0,0 +1,11 @@
+/* $Source$
+ * $State$
+ * $Revision$
+ */
+
+#ifndef _ACK_PLAT_H
+#define _ACK_PLAT_H
+
+#define ACKCONF_WANT_O_TEXT_O_BINARY 1
+
+#endif

plat/msdos/include/build.lua

@@ -0,0 +1,24 @@
+include("plat/build.lua")
+
+headermap = {}
+packagemap = {}
+
+local function addheader(h)
+	headermap[h] = "./"..h
+	packagemap["$(PLATIND)/msdos86/include/"..h] = "./"..h
+end
+
+addheader("ack/plat.h")
+addheader("sys/types.h")
+
+acklibrary {
+	name = "headers",
+	hdrs = headermap
+}
+
+installable {
+	name = "pkg",
+	map = packagemap
+}
+
+

plat/msdos/include/sys/types.h

@@ -0,0 +1,9 @@
+#ifndef _SYS_TYPES_H
+#define _SYS_TYPES_H
+
+typedef long pid_t;
+typedef int mode_t;
+typedef long time_t;
+typedef long suseconds_t;
+
+#endif

plat/msdos/libsys/build.lua

@@ -0,0 +1,28 @@
+bundle {
+	name = "srcs",
+	srcs = {
+		"./creat.c",
+		"./gettimeofday.c",
+		"./kill.c",
+		"./lseek.c",
+		"./open.c",
+		"./read.c",
+		"./setmode.c",
+		"./signal.c",
+		"./sys_fdmodes.c",
+		"./sys_getmode.c",
+		"./sys_initmain.c",
+		"./sys_iseof.c",
+		"./sys_seteof.c",
+		"./sys_seterrno.c",
+		"./sys_setmode.c",
+		"./write.c",
+	}
+}
+
+bundle {
+	name = "headers",
+	srcs = {
+		"./libsys.h"
+	}
+}

plat/msdos/libsys/read.c

@@ -5,6 +5,7 @@
 
 #include <stdio.h>
 #include <stdlib.h>
+#include <stdbool.h>
 #include <string.h>
 #include <errno.h>
 #include <unistd.h>
@@ -16,9 +17,7 @@ ssize_t read(int fd, void* buffer, size_t count)
 	ssize_t r, tot;
 	size_t left;
 	int eof = 0;
-
-	if (!count || _sys_getmode(fd) == O_BINARY)
-		return _sys_rawread(fd, buffer, count);
+	bool text = _sys_getmode(fd) == O_TEXT;
 
 	if (_sys_iseof(fd))
 		return 0;
@@ -47,6 +46,8 @@ ssize_t read(int fd, void* buffer, size_t count)
 		if (r <= 0)
 			return tot ? tot : r;
 
+		if (text)
+		{
 			q = memchr(p, 0x1a, (size_t)r);
 			if (q)
 			{
@@ -75,6 +76,7 @@ ssize_t read(int fd, void* buffer, size_t count)
 				}
 				--left;
 			}
+		}
 	} while (tot < count && !eof && _sys_isreadyr(fd));
 
 	return tot;

plat/msdos/libsys/sys_seterrno.c

@@ -35,7 +35,7 @@ static const signed char err_map[] =
  * Map an MS-DOS 2+ system error code to an `errno' value and store that in
  * `errno'.  Return a longword -1.
  */
-long _sys_seterrno(unsigned dos_err)
+long _sys_seterrno(unsigned short dos_err)
 {
 	if (dos_err < sizeof(err_map) / sizeof(err_map[0]))
 		errno = err_map[dos_err];

plat/msdos/libsys/write.c

@@ -0,0 +1,74 @@
+/* $Source$
+ * $State$
+ * $Revision$
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include "libsys.h"
+
+ssize_t write(int fd, void* buffer, size_t count)
+{
+	static const char crlf[2] = "\r\n";
+	int i;
+	char *p, *q;
+	size_t left, n;
+	ssize_t r, tot;
+
+	if (!count)
+		return 0;
+
+	p = buffer;
+	left = count;
+	tot = 0;
+
+	if (_sys_getmode(fd) == O_BINARY)
+	{
+		while (left)
+		{
+			r = _sys_rawwrite(fd, p, left);
+			if (r <= 0)
+				return tot ? tot : r;
+			tot += r;
+			p += r;
+			left -= r;
+		}
+	}
+	else
+	{
+		/* If the file descriptor is an O_TEXT fd, translate LFs to CRLFs. */
+		while (left)
+		{
+			q = memchr(p, '\n', left);
+			if (!q)
+				return _sys_rawwrite(fd, p, left);
+
+			n = q - p;
+			if (n)
+			{
+				r = _sys_rawwrite(fd, p, n);
+				if (r <= 0)
+					return tot ? tot : r;
+				tot += r;
+				p += r;
+				left -= r;
+				if (r != n)
+					break;
+			}
+
+			r = _sys_rawwrite(fd, crlf, sizeof crlf);
+			if (r != 2)
+			{
+				if (r > 0)
+					r = 0;
+				return tot ? tot : r;
+			}
+			++tot;
+			++p;
+			--left;
+		}
+	}
+	return tot;
+}

plat/msdos386/README

@@ -0,0 +1,24 @@
+The msdos386 platform
+=====================
+
+msdos386 is an i386-based BSP that produces DPMI DOS executables. It should
+have the same functionality as msdos86 (as the libc is all the same code), but
+has been much less well tested.
+
+The code runs in flat 32-bit mode, so normal 32-bit pointers work with no
+worries about segmentation. It requires a DPMI host to run; it was tested with
+CWSDPMI. It will _not_ automatically load the host --- you need to manually
+install the DPMI hsot first.
+
+IEEE floating point is available, but requires an FPU.
+
+
+Example command line
+====================
+
+ack -mmsdos386 -O -o msdos386.exe examples/paranoia.c
+
+
+David Given
+dg@cowlark.com
+

plat/msdos386/boot.s

@@ -0,0 +1,235 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+! Declare segments (the order is important).
+
+.sect .text
+.sect .rom
+.sect .data
+.sect .bss
+
+.sect .text
+#define STACK_BUFFER 128 /* number of bytes to leave for stack */
+
+! g 18b to break at the retf before coming here
+begtext:
+    ! On entry, the stub has cs and ds pointing at the 32-bit
+    ! segment, but ss is still pointing at the 16-bit segment.
+    !
+    !   ax: pmode code segment of stub
+    !   bx: pmode data segment of stub
+    !   cx: rmode segment of stub
+    !   dx: pointer to realloc routine (in stub)
+    !   si: pointer to interrupt routine (in stub)
+    !   di: pointer to transfer buffer (in stub)
+    !   bp: rmode PSP segment
+
+    ! Resize the segment to include the BSS.
+
+    o16 mov (realloc_ptr+4), ax
+    mov (realloc_ptr+0), edx
+    o16 mov (pmode_cs), ax
+    o16 mov (pmode_ds), bx
+    o16 mov (rmode), cx
+    o16 mov (interrupt_ptr+4), ax
+    mov (interrupt_ptr+0), esi
+    o16 mov (transfer_buffer_ptr), di
+
+    mov eax, __end
+    callf (realloc_ptr)
+
+    ! Clear BSS.
+
+    mov edi, begbss
+    mov ecx, endbss+3
+    sub ecx, edi
+    shr ecx, 2
+    xor eax, eax
+    cld
+    rep stos
+
+    ! It's now safe to switch stacks.
+
+    cli
+    mov eax, ds
+    mov ss, eax
+    mov sp, .stack
+    sti
+
+    ! Create a handle for low 1MB access.
+
+    o16 mov ax, 0x0000
+    o16 mov cx, 1
+    int 0x31                    ! allocate LDT
+    o16 mov (.doshandle), ax
+    mov es, ax
+    xchg ebx, eax
+
+    xor ecx, ecx
+    xor edx, edx
+    o16 mov ax, 0x0007
+    int 0x31                    ! set base address to 0
+    o16 dec dx
+    o16 mov cx, 0x000f
+    o16 mov ax, 0x0008
+    int 0x31                    ! set limit to 1MB
+
+    mov cx, ds
+    and cx, 3
+    shl cx, 5
+    or cx, 0xc093               ! 32-bit, big, data, r/w, expand-up
+    mov ax, 0x0009
+    int 0x31                    ! set descriptor access rights
+
+    ! Locate the PSP.
+    
+    movzx esi, bp
+    shl esi, 4                  ! convert to linear address
+
+    ! Copy the whole thing into 32-bit memory.
+
+    mov ecx, 0x100/4
+    mov edi, .psp
+    cld
+1:
+    eseg lods
+    mov (edi), eax
+    add edi, 4
+    loop 1b
+
+    ! Find the environment.
+
+    mov es, (.psp + 0x002C)     ! converted to pmode segment
+    
+    ! Count the size of the environment variable block.
+
+    xorb al, al                 ! byte to test for
+    xor edi, edi
+    xor edx, edx
+    cld
+    mov ecx, -1
+    scasb
+    jz 2f                       ! empty environment
+1:
+    repnz scasb
+    inc edx
+    scasb
+    jnz 1b
+2:
+    add edi, 2                  ! skip the mysterious word
+    repnz scasb                 ! program name
+
+    ! Copy the whole environment block onto the stack.
+
+    mov esi, edi
+    add esi, 3
+    and esi, ~3                 ! round up
+    jz empty_environment
+    mov ecx, esi
+    shr ecx, 2                  ! number of dwords
+    std
+    sub esi, 4
+1:
+    eseg lods
+    push eax
+    loop 1b
+empty_environment:
+    mov ecx, esp                ! environment data
+
+    ! Reset DF and es properly.
+
+    cld
+    push ss
+    pop es
+
+    ! Reserve space for argc and the argv and envp pointers on the
+    ! stack.  These will be passed to __m_a_i_n later.
+
+    sub esp, 3*4
+    mov eax, esp
+
+    ! Build up argc, argv[], and envp[].
+    push eax            ! output buffer for argc, argv, envp
+    push 3              ! MS-DOS version
+    push ecx            ! env. string data
+    push edx            ! count of env. vars.
+    push .psp+0x80      ! raw command line
+    call __sys_initmain
+    add esp, 5*4
+
+    ! Bail out if something went wrong.
+    test eax, eax
+    jnz no_room
+
+    ! argc, argv, and envp are now at the stack top.  Now go.
+    call __m_a_i_n
+    add sp, 3*4
+    push ax
+    call _exit
+
+no_room:
+    mov dx, no_room_msg
+    !call dos_msg
+    movb al, -1
+    jmp al_exit
+
+    ! Exit.
+.define __exit
+.extern __exit
+.define EXIT
+.extern EXIT
+__exit:
+EXIT:
+    pop bx
+    pop ax
+al_exit:
+    movb ah, 0x4c
+    int 0x21
+
+    ! These must be in the code segment due to bootstrap issues.
+realloc_ptr:         .space 6 ! far
+interrupt_ptr:       .space 6 ! far
+transfer_buffer_ptr: .space 2 ! near
+rmode:               .space 2
+pmode_cs:            .space 2
+pmode_ds:            .space 2
+
+.define realloc_ptr
+.define interrupt_ptr
+.define rmode
+.define pmode_cs
+.define pmode_ds
+.define transfer_buffer_ptr
+
+! Define symbols at the beginning of our various segments, so that we can find
+! them. (Except .text, which has already been done.)
+
+.define begtext, begdata, begbss
+.sect .data;       begdata:
+.sect .rom;        begrom:
+.sect .bss;        begbss:
+
+.sect .rom
+
+! Some text messages.
+bad_sys_msg: .ascii 'Bad DOS$'
+no_room_msg: .ascii 'No room$'
+
+! Some magic data. All EM systems need these.
+
+.define .trppc, .ignmask, _errno
+.comm .trppc, 4
+.comm .ignmask, 4
+.comm _errno, 4
+
+.comm .doshandle, 2
+.comm .psp, 256
+
+.sect .bss
+    .space 32*1024
+.stack:
+
+! vim: ts=4 sw=4 et ft=asm
+

plat/msdos386/build-pkg.lua

@@ -0,0 +1,53 @@
+include("plat/build.lua")
+
+ackfile {
+	name = "boot",
+	srcs = { "./boot.s" },
+	vars = { plat = "msdos386" }
+}
+
+ackfile {
+	name = "stub",
+	srcs = { "./stub.s" },
+	deps = { "plat/msdos386/libsys+headers" },
+	vars = { plat = "msdos386" }
+}
+
+normalrule {
+	name = "stub_aout",
+	ins = {
+		"util/led+led",
+		"+stub"
+	},
+	outleaves = { "stub.aout" },
+	commands = { "%{ins[1]} %{ins[2]} -o %{outs[1]}" }
+}
+
+normalrule {
+	name = "stub_exe",
+	ins = {
+		"util/amisc+aslod",
+		"+stub_aout"
+	},
+	outleaves = { "stub.exe" },
+	commands = { "%{ins[1]} %{ins[2]} %{outs[1]}" }
+}
+
+build_plat_libs {
+	name = "libs",
+	arch = "i386",
+	plat = "msdos386",
+}
+
+installable {
+	name = "pkg",
+	map = {
+		"+tools",
+		"+libs",
+        "./include+pkg",
+		["$(PLATIND)/msdos386/boot.o"] = "+boot",
+		["$(PLATIND)/msdos386/stub.exe"] = "+stub_exe",
+        ["$(PLATIND)/msdos386/libsys.a"] = "./libsys+lib",
+	}
+}
+

plat/msdos386/build-tools.lua

@@ -0,0 +1,21 @@
+include("plat/build.lua")
+
+build_as {
+	name = "as",
+	arch = "i386",
+}
+
+build_ncg {
+	name = "ncg",
+	arch = "i386",
+}
+
+return installable {
+	name = "tools",
+	map = {
+		["$(PLATDEP)/msdos386/as"] = "+as",
+		["$(PLATDEP)/msdos386/ncg"] = "+ncg",
+		["$(PLATIND)/descr/msdos386"] = "./descr",
+		"util/opt+pkg",
+	}
+}

plat/msdos386/descr

@@ -0,0 +1,77 @@
+var w=4
+var wa=2
+var p=4
+var pa=2
+var s=2
+var sa=2
+var l=4
+var la=2
+var f=4
+var fa=2
+var d=8
+var da=2
+var x=8
+var xa=2
+var ARCH=i386
+var PLATFORM=msdos386
+var PLATFORMDIR={EM}/share/ack/{PLATFORM}
+var CPP_F=-D__MSDOS__ -D__DOS__ -D_DOS
+var ALIGN=-a0:2 -a1:2 -a2:2 -a3:2
+var MACHOPT_F=-m8
+var EGO_PLAT_FLAGS=-M{EM}/share/ack/ego/{ARCH}.descr
+
+# Override the setting in fe so that files compiled for this platform can see
+# the platform-specific headers.
+
+var C_INCLUDES=-I{PLATFORMDIR}/include -I{EM}/share/ack/include/ansi
+
+name be
+	from .m.g
+	to .s
+	program {EM}/lib/ack/{PLATFORM}/ncg
+	args <
+	stdout
+	need .e
+end
+name as
+	from .s.so
+	to .o
+	program {EM}/lib/ack/{PLATFORM}/as
+	args - -o > <
+	prep cond
+end
+name led
+	from .o.a
+	to .out
+	program {EM}/lib/ack/em_led
+	mapflag -l* LNAME={PLATFORMDIR}/lib*
+	mapflag -fp FLOATS={EM}/{ILIB}fp
+	args {ALIGN} \
+		({RTS}:.b=-u _i_main) \
+	    (.e:{HEAD}={PLATFORMDIR}/boot.o) \
+		({RTS}:.ocm.bas.b={PLATFORMDIR}/c-ansi.o) \
+		({RTS}:.c={PLATFORMDIR}/c-ansi.o) \
+		({RTS}:.mod={PLATFORMDIR}/modula2.o) \
+		({RTS}:.p={PLATFORMDIR}/pascal.o) \
+		-o > < \
+		(.p:{TAIL}={PLATFORMDIR}/libpascal.a) \
+		(.b:{TAIL}={PLATFORMDIR}/libb.a) \
+		(.bas:{TAIL}={PLATFORMDIR}/libbasic.a) \
+		(.mod:{TAIL}={PLATFORMDIR}/libmodula2.a) \
+		(.ocm:{TAIL}={PLATFORMDIR}/liboccam.a) \
+		(.ocm.bas.mod.b.c.p:{TAIL}={PLATFORMDIR}/libc.a) \
+		{FLOATS?} \
+		(.e:{TAIL}={PLATFORMDIR}/libem.a \
+		           {PLATFORMDIR}/libsys.a \
+		           {PLATFORMDIR}/libc.a \
+		           {PLATFORMDIR}/libem.a \
+		           {PLATFORMDIR}/libend.a)
+	linker
+end
+name cv
+	from .out
+	to .exe
+	program {EM}/bin/aslod
+	args -p {PLATFORMDIR}/stub.exe < >
+	outfile msdos386.exe
+end

plat/msdos386/include/ack/plat.h

@@ -0,0 +1,6 @@
+#ifndef _ACK_PLAT_H
+#define _ACK_PLAT_H
+
+#define ACKCONF_WANT_O_TEXT_O_BINARY 1
+
+#endif

plat/msdos386/include/build.lua

@@ -0,0 +1,24 @@
+include("plat/build.lua")
+
+headermap = {}
+packagemap = {}
+
+local function addheader(h)
+	headermap[h] = "./"..h
+	packagemap["$(PLATIND)/msdos386/include/"..h] = "./"..h
+end
+
+addheader("ack/plat.h")
+addheader("sys/types.h")
+
+acklibrary {
+	name = "headers",
+	hdrs = headermap
+}
+
+installable {
+	name = "pkg",
+	map = packagemap
+}
+
+

plat/msdos386/include/sys/types.h

@@ -0,0 +1,9 @@
+#ifndef _SYS_TYPES_H
+#define _SYS_TYPES_H
+
+typedef long pid_t;
+typedef int mode_t;
+typedef long time_t;
+typedef long suseconds_t;
+
+#endif

plat/msdos386/libsys/_hol0.s

@@ -0,0 +1,14 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+.sect .bss
+
+! This data block is used to store information about the current line number
+! and file.
+
+.define hol0
+.comm hol0, 8

plat/msdos386/libsys/brk.s

@@ -0,0 +1,16 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+.define _brk
+_brk:
+	mov ebx, esp
+	mov eax, 1*4(ebx)
+	callf (realloc_ptr)
+	xor eax, eax
+	ret
+
+

plat/msdos386/libsys/build.lua

@@ -0,0 +1,44 @@
+bundle {
+	name = "headers",
+	srcs = {
+		"./libsysasm.h"
+	}
+}
+
+acklibrary {
+	name = "lib",
+	srcs = {
+		"./_hol0.s",
+		"./brk.s",
+		"./close.s",
+		"./errno.s",
+		"./getpid.s",
+		"./isatty.s",
+		"./rename.s",
+		"./sbrk.c",
+		"./sys_cpyin.s",
+		"./sys_cpyout.s",
+		"./sys_dpmidos.s",
+		"./sys_exists.s",
+		"./sys_getdate.s",
+		"./sys_gettime.s",
+		"./sys_isopen.s",
+		"./sys_isreadyr.s",
+		"./sys_rawcreat.s",
+		"./sys_rawlseek.s",
+		"./sys_rawopen.s",
+		"./sys_rawread.s",
+		"./sys_rawwrite.s",
+		"./sys_scpyout.s",
+		"./sys_xret.s",
+		"./unlink.s",
+		"plat/msdos/libsys+srcs",
+	},
+	deps = {
+		"plat/msdos/libsys+headers",
+		"+headers"
+	},
+	vars = {
+		plat = "msdos386"
+	}
+}

plat/msdos386/libsys/close.s

@@ -0,0 +1,16 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Close a file.
+
+.define _close
+_close:
+	mov ebx, esp
+	mov ebx, 1*4(esp)
+	movb ah, 0x3E
+	int 0x21
+	jmp .sys_zret

plat/msdos386/libsys/errno.s

@@ -0,0 +1,23 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+#define D(e) .define e; e
+
+.sect .data
+
+! Define various ACK error numbers. Note that these are *not* ANSI C
+! errnos, and are used for different purposes.
+
+D(ERANGE)         = 1
+D(ESET)           = 2
+D(EIDIVZ)         = 6
+D(EHEAP)          = 17
+D(EILLINS)        = 18
+D(EODDZ)          = 19
+D(ECASE)          = 20
+D(EBADMON)        = 25
+

plat/msdos386/libsys/getpid.s

@@ -0,0 +1,39 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+! Copyright (c) 2021--2022 TK Chia
+!
+! The authors hereby grant permission to use, copy, modify, distribute,
+! and license this software and its documentation for any purpose, provided
+! that existing copyright notices are retained in all copies and that this
+! notice is included verbatim in any distributions. No written agreement,
+! license, or royalty fee is required for any of the authorized uses.
+! Modifications to this software may be copyrighted by their authors
+! and need not follow the licensing terms described here, provided that
+! the new terms are clearly indicated on the first page of each file where
+! they apply.
+
+#include "libsysasm.h"
+
+! Get the current process identifier.  For MS-DOS, use the Program Segment
+! Prefix (PSP) segment as the PID, unless the system supports an actual
+! `getpid' syscall, e.g. European MS-DOS 4.0.
+!
+! (Note that pid_t is a 32-bit type.  This is to allow for PSP segments and
+! MS-DOS PIDs above 0x7FFF.)
+
+.define _getpid
+_getpid:
+	movb ah, 0x87
+	stc
+	int 0x21
+	jnc .eur_dos
+	movb ah, 0x51
+	mov ebx, 0x210000
+	callf (interrupt_ptr)
+	xchg ebx, eax
+.eur_dos:
+	movzx eax, ax
+	ret

plat/msdos386/libsys/isatty.s

@@ -0,0 +1,30 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Say whether a given file descriptor number refers to a terminal.
+
+.define _isatty
+_isatty:
+	mov ebx, esp
+	mov ebx, 4(ebx)
+	o16 mov ax, 0x4400
+	int 0x21
+	jc error
+	testb dl, dl
+	jz not_tty
+	mov eax, 1
+	ret
+not_tty:
+	mov (_errno), 25		! ENOTTY
+not_tty_2:
+	xor eax, eax
+	ret
+error:
+	push eax
+	call __sys_seterrno
+	pop ecx
+	jmp not_tty_2

plat/msdos386/libsys/libsysasm.h

@@ -0,0 +1,24 @@
+/*
+ * © 2013 David Given
+ * © 2022 TK Chia
+ * This file is redistributable under the terms of the 3-clause BSD license.
+ * See the file 'Copying' in the root of the distribution for the full text.
+ */
+
+#ifndef LIBSYSASM_H
+#define LIBSYSASM_H
+
+! Declare segments (the order is important).
+
+.sect .text
+.sect .rom
+.sect .data
+.sect .bss
+
+.sect .text
+
+! Size of transfer buffer, for 32-bit DPMI mode.
+
+TRANSFER_BUFFER_SIZE = 32 * 1024
+
+#endif

plat/msdos386/libsys/rename.s

@@ -0,0 +1,42 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Rename a file.
+
+.define _rename
+_rename:
+	push edi
+
+	! Destination filename.
+
+	mov eax, 4+8(esp)
+#define DEST_NAME_OFFSET (TRANSFER_BUFFER_SIZE / 2)
+	mov edx, DEST_NAME_OFFSET
+	mov ecx, edx
+	call .sys_sncpyout
+	jc 9f
+	xchg edi, eax
+	
+	! Source filename.
+
+	mov eax, 4+4(esp)
+	xor edx, edx
+	call .sys_sncpyout
+	jc 9f
+	xchg edx, eax
+
+	! Make the DOS call.
+
+	movb ah, 0x56
+	call .sys_dpmidos
+
+	pop edi
+	jmp .sys_zret
+
+9:
+	pop edi
+	jmp .sys_toolongret

plat/msdos386/libsys/sbrk.c

@@ -0,0 +1,40 @@
+/* $Source$
+ * $State$
+ * $Revision$
+ */
+
+#include <stdlib.h>
+#include <errno.h>
+#include <unistd.h>
+#include "libsys.h"
+
+extern char _end[1];
+static char* current = _end;
+
+void* sbrk(int increment)
+{
+	char* old;
+	char* new;
+
+	if (increment == 0)
+		return current;
+		
+	old = current;
+
+	new = old + increment;
+
+	if ((increment > 0) && (new <= old))
+		goto out_of_memory;
+	else if ((increment < 0) && (new >= old))
+		goto out_of_memory;
+
+	if (brk(new) < 0)
+		goto out_of_memory;
+		
+	current = new;
+	return old;
+
+out_of_memory:
+	errno = ENOMEM;
+	return OUT_OF_MEMORY;
+}

plat/msdos386/libsys/sys_cpyin.s

@@ -0,0 +1,32 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! .sys_cpyin: copy ecx bytes from the transfer buffer to es:eax (= ds:eax).
+! Preserve all registers, except the flags.
+
+.extern .sys_cpyin
+.sys_cpyin:
+	push eax
+	push ecx
+	push esi
+	push edi
+	movzx esi, (transfer_buffer_ptr)
+	xchg edi, eax
+	mov ds, (pmode_ds)
+	mov eax, ecx
+	shr ecx, 2
+	rep movs
+	andb al, 3
+	movb cl, al
+	rep movsb
+	mov eax, ss
+	mov ds, eax
+	pop edi
+	pop esi
+	pop ecx
+	pop eax
+	ret

plat/msdos386/libsys/sys_cpyout.s

@@ -0,0 +1,34 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! .sys_cpyout: copy ecx bytes starting from ds:eax to the transfer
+! buffer.  Return eax := offset of transfer buffer in the real mode data
+! segment.  Preserve all other registers, except the flags.
+
+.extern .sys_cpyout
+.sys_cpyout:
+	push ecx
+	push edx
+	push esi
+	push edi
+	xchg esi, eax
+	movzx edi, (transfer_buffer_ptr)
+	mov eax, edi
+	mov es, (pmode_ds)
+	mov edx, ecx
+	shr ecx, 2
+	rep movs
+	movb cl, dl
+	andb cl, 3
+	rep movsb
+	mov ecx, ss
+	mov es, ecx
+	pop edi
+	pop esi
+	pop edx
+	pop ecx
+	ret

plat/msdos386/libsys/sys_dpmidos.s

@@ -0,0 +1,16 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! .sys_dpmidos: simulate a call to real-mode int 0x21 with the current
+! 16-bit register values.
+
+.extern .sys_dpmidos
+.sys_dpmidos:
+	movzx ebx, bx
+	or ebx, 0x210000
+	callf (interrupt_ptr)
+	ret

plat/msdos386/libsys/sys_exists.s

@@ -0,0 +1,21 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Say whether a file exists with the given name.
+
+.define __sys_exists
+__sys_exists:
+	mov eax, 4(esp)
+	call .sys_scpyout
+	jc 9f
+	xchg edx, eax
+	mov eax, 0x4300
+	call .sys_dpmidos
+9:
+	sbb eax, eax
+	inc eax
+	ret

plat/msdos386/libsys/sys_getdate.s

@@ -0,0 +1,18 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Get the current system date from MS-DOS.
+
+.define __sys_getdate
+__sys_getdate:
+	movb ah, 0x2a
+	int 0x21
+	mov ebx, esp
+	mov ebx, 4(ebx)
+	o16 mov 0(ebx), dx
+	o16 mov 2(ebx), cx
+	ret

plat/msdos386/libsys/sys_gettime.s

@@ -0,0 +1,18 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Get the current system time from MS-DOS.
+
+.define __sys_gettime
+__sys_gettime:
+	movb ah, 0x2c
+	int 0x21
+	mov ebx, esp
+	mov ebx, 4(ebx)
+	o16 mov 0(ebx), cx
+	o16 mov 2(ebx), dx
+	ret

plat/msdos386/libsys/sys_isopen.s

@@ -0,0 +1,18 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Say whether a given file descriptor number refers to a valid open file
+! descriptor.
+
+.define __sys_isopen
+__sys_isopen:
+	mov ebx, 4(esp)
+	mov eax, 0x4400
+	int 0x21
+	sbb eax, eax
+	inc eax
+	ret

plat/msdos386/libsys/sys_isreadyr.s

@@ -0,0 +1,22 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Say whether a file descriptor is ready for input, i.e. reading from the
+! fd will immediately return something.
+
+.define __sys_isreadyr
+__sys_isreadyr:
+	mov ebx, esp
+	mov eax, 0x4406
+	mov ebx, 4(ebx)
+	int 0x21
+	jnc ok
+	movb al, 0
+ok:
+	o16 cbw
+	cwde
+	ret

plat/msdos386/libsys/sys_rawcreat.s

@@ -0,0 +1,28 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Create or truncate a file.
+
+.define __sys_rawcreat
+__sys_rawcreat:
+	! Copy filename to transfer buffer.
+
+	mov eax, 4(esp)
+	call .sys_scpyout
+	jc 9f
+
+	! Make the DOS call.
+
+	xchg edx, eax
+	movb ah, 0x3c
+	movb al, 8(esp)
+	call .sys_dpmidos
+
+	jmp .sys_axret
+
+9:
+	jmp .sys_toolongret

plat/msdos386/libsys/sys_rawlseek.s

@@ -0,0 +1,20 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Move the current file position for a file descriptor.
+
+.define __sys_rawlseek
+__sys_rawlseek:
+	movb ah, 0x42
+	mov ebx, esp
+	mov edx, 8(ebx)
+	mov ecx, edx
+	shr ecx, 16
+	movb al, 12(ebx)
+	mov ebx, 4(ebx)
+	int 0x21
+	jmp .sys_dxaxret

plat/msdos386/libsys/sys_rawopen.s

@@ -0,0 +1,24 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Open an existing file.
+
+.define __sys_rawopen
+__sys_rawopen:
+	! Copy filename to transfer buffer.
+
+	mov eax, 4(esp)
+	call .sys_scpyout
+
+	! Make the DOS call.
+
+	xchg edx, eax
+	movb ah, 0x3d
+	movb al, 8(esp)
+	call .sys_dpmidos
+
+	jmp .sys_axret

plat/msdos386/libsys/sys_rawread.s

@@ -0,0 +1,50 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Read bytes from a file descriptor.  These routines do not do any
+! translation between CRLF and LF line endings.
+!
+! Note that, for MS-DOS, a raw "write" request of zero bytes will truncate
+! (or extend) the file to the current file position.
+
+.define __sys_rawread
+__sys_rawread:
+file_handle = 1*4
+write_buffer = 2*4
+amount_to_read = 3*4
+
+	mov eax, amount_to_read(esp)
+	mov ecx, TRANSFER_BUFFER_SIZE
+	cmp eax, ecx
+	jge 2f
+	mov ecx, eax
+2:
+
+	! Read from DOS into the transfer buffer.
+
+	movb ah, 0x3f
+	o16 mov dx, (transfer_buffer_ptr)
+	o16 mov bx, file_handle(esp)
+	call .sys_dpmidos
+	jc 3f
+
+	! Copy eax bytes out of the transfer buffer.
+
+	movzx ecx, ax
+	mov eax, write_buffer(esp)
+	call .sys_cpyin
+
+	xchg eax, ecx
+	ret
+
+3:
+	! Process errors.
+
+	push eax
+	call __sys_seterrno
+	pop ecx
+	ret

plat/msdos386/libsys/sys_rawwrite.s

@@ -0,0 +1,48 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Write bytes to/to a file descriptor.  These routines do not do any
+! translation between CRLF and LF line endings.
+!
+! Note that, for MS-DOS, a raw "write" request of zero bytes will truncate
+! (or extend) the file to the current file position.
+
+.define __sys_rawwrite
+__sys_rawwrite:
+file_handle = 1*4
+read_buffer = 2*4
+amount_to_write = 3*4
+
+    mov eax, amount_to_write(esp)
+    mov ecx, TRANSFER_BUFFER_SIZE
+    cmp eax, ecx
+    jge 2f
+    mov ecx, eax
+2:
+
+    ! Copy ecx bytes into the transfer buffer.
+
+    mov eax, read_buffer(esp)
+    call .sys_cpyout
+
+    ! Write from the transfer buffer to DOS.
+
+    xchg edx, eax
+    movb ah, 0x40
+    o16 mov bx, file_handle(esp)
+    call .sys_dpmidos
+    movzx eax, ax
+    jnc exit
+
+    push eax
+    call __sys_seterrno
+    pop ecx
+exit:
+    ret
+
+! vim: sw=4 ts=4 et
+

plat/msdos386/libsys/sys_scpyout.s

@@ -0,0 +1,58 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! .sys_scpyout: copy the ASCIIZ string starting from ds:eax to the
+! transfer buffer.  The resulting ASCIIZ string, including the final null,
+! should fit into the entire transfer buffer.  Return eax := offset of
+! transfer buffer in real mode data segment.  Return CF = 1 if and only if
+! the ASCIIZ string is too long to fit.  Preserve all other registers,
+! except the flags.
+!
+! .sys_sncpyout: copy the ASCIIZ string starting from ds:eax to offset
+! edx into the transfer buffer.  The resulting ASCIIZ string should occupy
+! at most ecx bytes, including the final null.  Return eax : offset of
+! string in real mode data segment.  Return CF = 1 if and only if the ASCIIZ
+! string is too long to fit.  Preserve all other registers, except the
+! flags.
+
+.extern .sys_scpyout
+.extern .sys_sncpyout
+.sys_scpyout:
+	push ecx
+	push edx
+	mov ecx, TRANSFER_BUFFER_SIZE
+	xor edx, edx
+	jmp .cont
+.sys_sncpyout:
+	push ecx
+	push edx
+.cont:
+	push esi
+	push edi
+	mov esi, eax
+	movzx edi, (transfer_buffer_ptr)
+	add edi, edx
+	mov edx, edi
+	mov es, (pmode_ds)
+	jcxz .error
+.loop:
+	lodsb
+	stosb
+	testb al, al
+	loopnz .loop
+	jz .ok
+.error:
+	stc
+.ok:
+	xchg edx, eax
+	mov edx, ss
+	mov es, edx
+	pop edi
+	pop esi
+	pop edx
+	pop ecx
+	ret

plat/msdos386/libsys/sys_xret.s

@@ -0,0 +1,54 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! .sys_zret: if the carry flag is set, then set `errno' from the DOS error
+! code in ax, and return an int -1.  If the carry flag is clear, just
+! return an int zero.
+!
+! .sys_axret: if the carry flag is set, then set `errno' from the DOS error
+! code in ax, and return a shortword -1.  If the carry flag is clear, just
+! return eax := ax as a return value.
+!
+! .sys_dxaxret: same as .sys_axret, but return -1 or eax := dx:ax as a
+! return value.
+!
+! .sys_toolongret: a file name is too long: set `errno' to E2BIG, and return
+! -1.
+
+.extern .sys_zret
+.extern .sys_axret
+.extern .sys_dxaxret
+.extern .sys_toolongret
+.sys_zret:
+	jc error
+	xor eax, eax
+no_error:
+	ret
+
+.sys_axret:
+	jc error
+	movzx eax, ax
+	ret
+
+.sys_dxaxret:
+	jc error
+	shl edx, 16
+	o16 mov dx, ax
+	mov eax, edx
+	ret
+
+.sys_toolongret:
+	mov (_errno), 7			! E2BIG
+	or eax, -1
+	ret
+
+error:
+	movzx eax, ax
+	push eax
+	call __sys_seterrno
+	pop ecx
+	ret

plat/msdos386/libsys/unlink.s

@@ -0,0 +1,23 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+! Remove a file.
+
+.define _unlink
+_unlink:
+	! Copy filename to transfer buffer.
+
+	mov eax, 4(esp)
+	call .sys_scpyout
+
+	! Make the DOS call.
+
+	xchg edx, eax
+	movb ah, 0x41
+	call .sys_dpmidos
+
+	jmp .sys_zret

plat/msdos386/stub.s

@@ -0,0 +1,414 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+#include "libsysasm.h"
+
+.use16
+exe_header:
+    .data2 0x5a4d               ! magic number
+    .data2 exe_last_page        ! number of bytes in last loadable page
+    .data2 exe_text_pages       ! size of .exe, in pages
+    .data2 0                    ! number of relocation entries
+    .data2 0                    ! start of loadable area, in 16-byte paragraphs
+    .data2 exe_ram_paras        ! required RAM size, in 16-byte paragraphs
+    .data2 exe_ram_paras        ! maximum RAM siz, in 16-byte paragraphs
+    .data2 0                    ! initial SS, relative to program
+    .data2 stack                ! initial SP
+    .data2 0                    ! checksum (ignored)
+    .data2 exe_start            ! initial IP
+    .data2 0                    ! initial CS, relative to program
+    .data2 0                    ! offset of relocation table
+    .data2 0                    ! overlay number
+
+exe_start:
+    ! On entry, DS=ES=PSP. Make DS=CS, so we're running in tiny mode.
+
+    push cs
+    pop ds
+    mov (rseg), ds
+    mov (pspseg), es
+
+    ! Ensure that at least two handles are available by blindly closing some.
+
+	mov	bx, 19                  ! close handle
+	movb ah, 0x3e
+	int	0x21
+	mov	bx, 18                  ! close handle
+	movb ah, 0x3e
+	int	0x21
+     
+    ! Scan the environment to find the program name.
+
+    eseg mov es, (0x2c)         ! environment pointer segment from PSP
+    xor di, di
+    xorb al, al
+    mov cx, 0xffff
+    cld
+1:
+    repne scasb                 ! find end of next string
+    eseg cmpb (di), 0
+    jnz 1b
+2:
+    add di, 3
+    mov si, di
+    repne scasb
+
+    ! es:si now points at the program name, and es:di at one past the end.
+
+    mov cx, di
+    sub cx, si
+    sub sp, cx                  ! allocate space on stack
+    mov di, sp                  ! es:si source, ds:di dest
+1:
+    eseg movb al, (si)
+    inc si
+    movb (di), al
+    inc di
+    cmpb al, 0
+    jnz 1b
+
+    ! Open the file. (0x5f)
+
+    mov dx, sp
+    mov ax, 0x3d00
+    int 0x21
+    jc no_file
+    mov (fh), ax
+    add sp, cx                  ! don't need filename any more
+
+    ! Get the file length (== text len).
+
+    mov bx, ax
+    mov ax, 0x4202
+    xor cx, cx                  ! high offset
+    xor dx, dx                  ! low offset
+    int 0x21                    ! lseek
+    mov (pmemlen+0), ax
+    mov (pmemlen+2), dx
+
+    ! Initialise DPMI.
+
+    mov ax, 0x1687
+    int 0x2f
+    or ax, ax
+    jnz no_dpmi
+    mov (pmode_switch+0), di    ! write back PMODE switch routine
+    mov (pmode_switch+2), es
+    or si, si                   ! do we need a DPMI private area?
+    jz 1f
+
+    mov bx, si
+    movb ah, 0x48
+    int 0x21                    ! allocate memory from DOS
+    mov es, ax                  ! data area segment -> es
+1:
+    ! Switch to protected mode.
+
+    mov ax, 1                   ! 32-bit app
+    callf (pmode_switch)
+    jc bad_dpmi
+
+    ! We're now in protected mode.
+
+    mov (psegcs), cs
+    mov (psegds), ds
+
+    ! Allocate space for the code segment.
+
+    mov ax, 0x0000
+    mov cx, 1
+    int 0x31                    ! allocate LDT
+    jc bad_dpmi
+    mov fs, ax
+    mov (psegcs32), ax
+
+    mov cx, (pmemlen+0)
+    mov bx, (pmemlen+2)
+    mov ax, 0x0501
+    int 0x31                    ! allocate linear address
+    jc bad_dpmi
+    mov (pmemhandle+0), di
+    mov (pmemhandle+2), si
+
+    mov dx, cx
+    mov cx, bx
+    mov bx, fs
+    mov ax, 0x0007
+    int 0x31                    ! set segment base address
+    jc bad_dpmi
+
+    mov bx, fs
+    mov dx, (pmemlen+0)
+    mov cx, (pmemlen+2)
+    sub dx, 1
+    sbb cx, 0
+    mov ax, 0x0008
+    int 0x31                    ! set segment limit
+
+    mov cx, cs
+    and cx, 3
+    shl cx, 5
+    or cx, 0xc09b               ! 32-bit, big, code, non-conforming, readable
+    mov bx, fs
+    mov ax, 0x0009
+    int 0x31                    ! set descriptor access rights
+
+    ! Allocate the data segment (as a simple clone of the code segment). (10e)
+
+    mov ax, 0x000a
+    mov bx, fs
+    int 0x31
+    mov es, ax
+    mov (psegds32), ax
+
+    mov cx, ax
+    and cx, 3
+    shl cx, 5
+    or cx, 0xc093               ! 32-bit, big, data, r/w, expand-up
+    mov bx, es
+    mov ax, 0x0009
+    int 0x31                    ! set descriptor access rights
+
+    ! Load the program.
+
+    mov bx, (fh)
+    mov ax, 0x4200
+    xor cx, cx                  ! high offset
+    mov dx, text_top            ! low offset
+    int 0x21                    ! lseek
+
+    o32 xor edi, edi            ! destination 32-bit register
+1:
+    movb ah, 0x3f
+    mov bx, (fh)
+    mov cx, TRANSFER_BUFFER_SIZE
+    mov dx, transfer_buffer
+    o32 push edi
+    call int21                  ! read up to 32kB into transfer buffer
+    o32 pop edi
+    cmp ax, 0
+    je 2f
+
+    o32 movzx ecx, ax           ! number of bytes read
+    o32 mov esi, transfer_buffer
+    cld
+    rep a32 movsb
+    jmp 1b
+2:
+
+    ! Close the file.
+
+    movb ah, 0x3e
+    mov bx, (fh)
+    int 0x21                    ! close
+
+    ! Jump to the new segment and enter 32-bit mode!
+
+    o32 movzx eax, (psegcs)
+    o32 movzx ebx, (psegds)
+    o32 movzx ecx, (rseg)
+    o32 mov edx, realloc
+    o32 mov esi, interruptf
+    o32 mov edi, transfer_buffer
+    o32 movzx ebp, (pspseg)
+    push es
+    pop ds
+    push fs
+    push 0
+    retf ! 19b
+
+    ! Helper routine which reallocates the linear block that the 32-bit code
+    ! is running from. This can't happen from inside the 32-bit code itself
+    ! because it might move.
+    !
+    ! On entry, ds and ss are ignored. On exit, ds and es are set to the
+    ! 32-bit segment.
+    !  eax: new block size
+realloc:
+    cseg mov ds, (psegds)
+    cli                         ! atomically switch stacks
+    o32 mov (dpmi_ebp), esp     ! yes, saving esp into the ebp field
+    mov (dpmi_ss), ss
+    mov ss, (psegds)
+    mov sp, dosstack
+    sti
+    pusha
+
+    o32 add eax, 1024*1024 - 1
+    o32 and eax, ~[1024*1024 - 1]
+    o32 mov (pmemlen), eax
+    mov cx, (pmemlen+0)
+    mov bx, (pmemlen+2)
+    mov di, (pmemhandle+0)
+    mov si, (pmemhandle+2)
+    mov ax, 0x0503
+    int 0x31                    ! resize memory block
+    jc bad_dpmi
+    mov (pmemhandle+0), di
+    mov (pmemhandle+2), si
+    mov (pmemaddr+0), cx
+    mov (pmemaddr+2), bx
+
+    mov bx, (psegcs32)
+    mov dx, (pmemaddr+0)
+    mov cx, (pmemaddr+2)
+    mov ax, 0x0007
+    int 0x31                    ! set cs linear address
+    jc bad_dpmi
+    mov bx, (psegds32)
+    int 0x31                    ! set ds linear address
+    jc bad_dpmi
+    mov dx, (pmemlen+0)
+    mov cx, (pmemlen+2)
+    sub dx, 1
+    sbb cx, 0
+    mov ax, 0x0008
+    int 0x31                    ! set ds segment limit
+    jc bad_dpmi
+    
+    popa
+    o32 mov eax, (pmemlen)
+    cli                         ! atomically switch stacks back
+    mov ss, (dpmi_ss)
+    o32 mov esp, (dpmi_ebp)
+    mov es, (psegds32)
+    mov ds, (psegds32)
+    sti
+
+    o32 retf
+
+bad_dpmi:
+    mov si, bad_dpmi_msg
+    jmp exit_with_error
+
+no_file:
+    mov si, no_file_msg
+    jmp exit_with_error
+
+no_dpmi:
+    mov si, no_dpmi_msg
+    ! fall through
+
+! Displays the message in si and exits.
+! This uses a loop because from protected mode any interrupt which
+! takes a pointer parameter requires special treatment.
+exit_with_error:
+    movb dl, (si)
+    cmpb dl, 0
+    je 1f
+    inc si
+
+    movb ah, 2
+    int 0x21                    ! print character
+    jmp exit_with_error
+1:
+    mov ax, 0x4cff
+    int 0x21                    ! terminate with error code al
+
+    ! Simulate DOS interrupt.
+int21:
+    o32 movzx ebx, bx
+    o32 or ebx, 0x210000
+    ! Simulate interrupt in the high half of ebx.
+interrupt:
+    o32 mov (dpmi_eax), eax
+    o32 mov (dpmi_ebx), ebx
+    o32 mov (dpmi_ecx), ecx
+    o32 mov (dpmi_edx), edx
+    o32 mov (dpmi_esi), esi
+    o32 mov (dpmi_edi), edi
+    pushf
+    pop (dpmi_flags)
+    mov ax, (rseg)
+    mov (dpmi_ds), ax
+    mov (dpmi_ss), ax
+    push es
+    mov (dpmi_sp), dosstack     ! auto stack is too small
+    push ds
+    pop es
+    o32 mov edi, dpmi_edi
+    mov ax, 0x300
+    o32 shr ebx, 16
+    xor cx, cx
+    int 0x31                    ! simulate DOS interrupt
+    pop es
+    o32 mov eax, (dpmi_eax)
+    o32 mov ebx, (dpmi_ebx)
+    o32 mov ecx, (dpmi_ecx)
+    o32 mov edx, (dpmi_edx)
+    o32 mov esi, (dpmi_esi)
+    o32 mov edi, (dpmi_edi)
+    push (dpmi_flags)
+    popf
+    ret
+
+! Far call wrapper around interrupt.
+interruptf:
+    push ds
+    cseg mov ds, (psegds)
+    call interrupt
+    pop ds
+    o32 retf
+
+bad_dpmi_msg:
+    .asciz "DPMI error during setup"
+no_file_msg:
+    .asciz "Couldn't open .exe"
+no_dpmi_msg:
+    .asciz "No DPMI host installed"
+.align 4
+text_top:
+
+exe_text_pages = [text_top - exe_header + 511] / 512
+exe_last_page = [text_top - exe_header] % 512
+
+.sect .rom
+
+.sect .bss
+bss_start:
+
+dpmi_edi:       .space 4
+dpmi_esi:       .space 4
+dpmi_ebp:       .space 4
+                .space 4 ! reserved
+dpmi_ebx:       .space 4
+dpmi_edx:       .space 4
+dpmi_ecx:       .space 4
+dpmi_eax:       .space 4
+dpmi_flags:     .space 2
+dpmi_es:        .space 2
+dpmi_ds:        .space 2
+dpmi_fs:        .space 2
+dpmi_gs:        .space 2
+dpmi_ip:        .space 2
+dpmi_cs:        .space 2
+dpmi_sp:        .space 2
+dpmi_ss:        .space 2
+
+pmode_switch:   .space 4
+rseg:           .space 2 ! real mode
+pspseg:         .space 2 ! real mode
+psegcs:         .space 2 ! protected mode 16-bit code segment
+psegds:         .space 2 ! protected mode 16-bit data segment
+psegcs32:       .space 2 ! protected mode 32-bit code segment
+psegds32:       .space 2 ! protected mode 32-bit data segment
+pmemaddr:       .space 4 ! protected mode linear memory address
+pmemhandle:     .space 4 ! protected mode linear memory handle
+pmemlen:        .space 4 ! protected mode linear memory length
+fh:             .space 2
+
+    .space 512
+stack:
+    .space 512
+dosstack:
+
+transfer_buffer:
+    .space TRANSFER_BUFFER_SIZE
+
+bss_top:
+exe_ram_paras = [bss_top - bss_start + 15] / 16
+
+! vim: ts=4 sw=4 et ft=asm
+

plat/msdos86/descr

@@ -84,5 +84,5 @@ name cv
 	mapflag -i LOD=amzlod
 	program {EM}/bin/{LOD}
 	args < >
-	outfile msdos86.exe
+	outfile msdos86.com
 end

plat/msdos86/libsys/build.lua

@@ -3,41 +3,28 @@ acklibrary {
     srcs = {
 		"./brk.c",
 		"./close.s",
-		"./creat.c",
 		"./errno.s",
 		"./getpid.s",
-		"./gettimeofday.c",
 		"./_hol0.s",
 		"./isatty.s",
-		"./kill.c",
-		"./lseek.c",
-		"./open.c",
-		"./read.c",
-		"./setmode.c",
-		"./signal.c",
+		"./rename.s",
 		"./sys_exists.s",
-		"./sys_fdmodes.c",
 		"./sys_getdate.s",
-		"./sys_getmode.c",
 		"./sys_gettime.s",
-		"./sys_initmain.c",
-		"./sys_iseof.c",
 		"./sys_isopen.s",
 		"./sys_isreadyr.s",
 		"./sys_rawcreat.s",
 		"./sys_rawlseek.s",
 		"./sys_rawopen.s",
 		"./sys_rawrw.s",
-		"./sys_seteof.c",
-		"./sys_seterrno.c",
-		"./sys_setmode.c",
 		"./sys_xret.s",
 		"./unlink.s",
-		"./write.c",
+		"plat/msdos/libsys+srcs",
     },
 	deps = {
 		"lang/cem/libcc.ansi/headers+headers",
 		"plat/msdos86/include+headers",
+		"plat/msdos/libsys+headers",
 	},
     vars = {
         plat = "msdos86"

plat/msdos86/libsys/rename.s

@@ -0,0 +1,26 @@
+#
+! $Source$
+! $State$
+! $Revision$
+
+! Declare segments (the order is important).
+
+.sect .text
+.sect .rom
+.sect .data
+.sect .bss
+
+.sect .text
+
+! Rename a file.
+
+.define _rename
+_rename:
+	mov bx, sp
+	push di
+	mov dx, 2(bx)
+	mov di, 4(bx)
+	movb ah, 0x56
+	int 0x21
+	pop di
+	jmp .sys_zret

plat/msdos86/libsys/write.c

@@ -1,61 +0,0 @@
-/* $Source$
- * $State$
- * $Revision$
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include "libsys.h"
-
-ssize_t write(int fd, void* buffer, size_t count)
-{
-	static const char crlf[2] = "\r\n";
-	int i;
-	char *p, *q;
-	size_t left, n;
-	ssize_t r, tot;
-
-	if (!count)
-		return 0;
-
-	if (_sys_getmode(fd) == O_BINARY)
-		return _sys_rawwrite(fd, buffer, count);
-
-	/* If the file descriptor is an O_TEXT fd, translate LFs to CRLFs. */
-	p = buffer;
-	left = count;
-	tot = 0;
-	while (left)
-	{
-		q = memchr(p, '\n', left);
-		if (!q)
-			return _sys_rawwrite(fd, p, left);
-
-		n = q - p;
-		if (n)
-		{
-			r = _sys_rawwrite(fd, p, n);
-			if (r <= 0)
-				return tot ? tot : r;
-			tot += r;
-			p += r;
-			left -= r;
-			if (r != n)
-				break;
-		}
-
-		r = _sys_rawwrite(fd, crlf, sizeof crlf);
-		if (r != 2)
-		{
-			if (r > 0)
-				r = 0;
-			return tot ? tot : r;
-		}
-		++tot;
-		++p;
-		--left;
-	}
-	return tot;
-}

plat/pc86/boot.s

@@ -302,6 +302,21 @@ argv: .data2 exename, 0
 envp: .data2 0
 exename: .asciz 'pc86.img'
 
+	! A degenerate "hard disk partition table" covering this boot
+	! sector (possibly needed if booting from a USB drive).
+
+	.seek 0x1BE
+	.data1 0x80		! boot indicator (0x80 = active)
+	.data1 0x00		! partition start head
+	.data1 0x01		! partition start sector and start track high
+	.data1 0x00		! partition start track low
+	.data1 0x7F		! OS or filesystem indicator
+	.data1 0xFF		! partition end head
+	.data1 0xFF		! partition end sector and end track high
+	.data1 0xFF		! partition end track low
+	.data4 0		! partition start LBA
+	.data4 0xFFFFFFFF	! length of partition in sectors
+
 	! ...and we need this to fool the PC into booting our boot sector.
 
 	.seek 0x1FE

util/amisc/aslod.1

@@ -3,7 +3,7 @@
 aslod \- ACK simple loader
 .SH SYNOPSIS
 .B aslod
-[\-h] [\-v] inputfile outputfile
+[\-h] [\-v] [\-p prefixfile] inputfile outputfile
 .SH DESCRIPTION
 .I aslod
 converts an absolute ack.out file into a simple binary memory dump.
@@ -16,5 +16,8 @@ The file must have all references resolved and be linked to a
 fixed address. aslod will dump the segments, in order, such
 that the first byte of TEXT is at offset 0 in the file
 (regardless of where it is in memory).
+.PP
+If a prefix file is specified, this is prepended to the output before writing.
+No changes to the output itself are made.
 .SH "SEE ALSO"
 ack.out(5)

util/amisc/aslod.c

@@ -37,6 +37,7 @@ struct outsect outsect[S_MAX];
 char* stringarea;
 
 char* outputfile = NULL;                /* Name of output file, or NULL */
+char* prefixfile = NULL;				/* Name of prefix file, or NULL */
 char* program;                          /* Name of current program: argv[0] */
 
 FILE* input;                            /* Input stream */
@@ -136,6 +137,19 @@ void emits(struct outsect* section, struct outsect* nextsect)
 	}
 }
 
+void emitprefixfile(void)
+{
+	FILE* fp = fopen(prefixfile, "rb");
+
+	while (!feof(fp))
+	{
+		char buffer[BUFSIZ];
+		size_t blocksize = fread(buffer, 1, BUFSIZ, fp);
+		writef(buffer, 1, blocksize);
+	}
+
+	fclose(fp);
+}
 
 /* Macros from modules/src/object/obj.h */
 #define Xchar(ch)	((ch) & 0377)
@@ -204,6 +218,12 @@ int main(int argc, char* argv[])
 				verbose = true;
 				break;
 
+			case 'p':
+				argv++;
+				argc--;
+				prefixfile = argv[1];
+				break;
+
 			default:
 			syntaxerror:
 				fatal("syntax error --- try -h for help");
@@ -288,6 +308,8 @@ int main(int argc, char* argv[])
 
 	/* And go! */
 	
+	if (prefixfile)
+		emitprefixfile();
 	emits(&outsect[TEXT], &outsect[ROM]);
 	emits(&outsect[ROM], &outsect[DATA]);
 	emits(&outsect[DATA], NULL);

util/ncgg/build.lua

@@ -18,7 +18,7 @@ normalrule {
 	},
 	outleaves = { "enterkeyw.c" },
 	commands = {
-		"$LUA %{ins[1]} < %{ins[2]} > %{outs[1]}"
+		"$(LUA) %{ins[1]} < %{ins[2]} > %{outs[1]}"
 	}
 }