updated for Minix 1.5

lib/minixST/include/.distr

@@ -1,12 +1,2 @@
-ansi.h
+a.out.h
-fcntl.h
-limits.h
-lib.h
-errno.h
 minix
-sgtty.h
-signal.h
-string.h
-time.h
-utime.h
-sys

lib/minixST/include/a.out.h

@@ -1,16 +1,17 @@
 /* The <a.out> header file describes the format of executable files. */
+/* This version is intended for the Atari ST */
 
 #ifndef _AOUT_H
 #define _AOUT_H
 
 struct	exec {			/* a.out header */
-	unsigned char	a_magic[2];	/* magic number */
-	unsigned char	a_flags;	/* flags, see below */
 	unsigned char	a_cpu;		/* cpu id */
-	unsigned char	a_hdrlen;	/* length of header */
+	unsigned char	a_flags;	/* flags, see below */
-	unsigned char	a_unused;	/* reserved for future use */
+	unsigned char	a_magic[2];	/* magic number */
 	unsigned short	a_version;	/* version stamp */	
 				/* not used */
+	unsigned char	a_unused;	/* reserved for future use */
+	unsigned char	a_hdrlen;	/* length of header */
 	long		a_text;		/* size of text segement in bytes */
 	long		a_data;		/* size of data segment in bytes */
 	long		a_bss;		/* size of bss segment in bytes */
@@ -24,8 +25,8 @@ struct	exec {			/* a.out header */
 	long		a_dbase;	/* data relocation base */
 };
 
-#define A_MAGIC0	(unsigned char) 0x01
+#define A_MAGIC0	(unsigned char) 0x03
-#define A_MAGIC1	(unsigned char) 0x03
+#define A_MAGIC1	(unsigned char) 0x01
 #define BADMAG(X)	((X).a_magic[0] != A_MAGIC0 ||\
 			 (X).a_magic[1] != A_MAGIC1)
 

lib/minixST/include/minix/.distr

@@ -1,5 +1 @@
 config.h
-callnr.h
-com.h
-const.h
-type.h

lib/minixST/include/minix/config.h

@@ -0,0 +1,121 @@
+/* This file sets configuration parameters for the MINIX kernel, FS, and MM.
+ * It is divided up into two main sections.  The first section contains
+ * user-settable parameters.  In the second section, various internal system
+ * parameters are set based on the user-settable parameters.
+ */
+
+/*===========================================================================*
+ *		This section contains user-settable parameters		     *
+ *===========================================================================*/
+
+/* MACHINE must be set to one of the machine types list below. */
+#define MACHINE        ATARI	/* Must be one of the names listed below */
+#define IBM_PC             1	/* any  8088 or 80x86-based system */
+#define SUN_4             40	/* any SUN SPARC-based system */
+#define ATARI             60	/* ATARI ST (68000) */
+#define AMIGA             61	/* Commodore Amiga (68000) */
+#define MACINTOSH         62	/* Apple Macintosh (68000) */
+
+
+/* If ROBUST is set to 1, writes of i-node, directory, and indirect blocks
+ * from the cache happen as soon as the blocks are modified.  This gives a more
+ * robust, but slower, file system.  If it is set to 0, these blocks are not
+ * given any special treatment, which may cause problems if the system crashes.
+ */
+#define ROBUST             0	/* 0 for speed, 1 for robustness */
+
+/* If HAVE_SCATTERED_IO is set to 1, scattered I/O is enabled. */
+/* DEBUG - 1.4b will always use this. */
+#define HAVE_SCATTERED_IO  1
+
+
+/* The buffer cache should be made as large as you can afford. */
+#if INTEL_32BITS
+#define NR_BUFS          320	/* # blocks in the buffer cache */
+#define NR_BUF_HASH      512	/* size of buf hash table; MUST BE POWER OF 2*/
+#else
+#define NR_BUFS           30	/* # blocks in the buffer cache */
+#define NR_BUF_HASH       32	/* size of buf hash table; MUST BE POWER OF 2*/
+#endif
+
+
+/* Defines for kernel configuration. */
+#define AUTO_BIOS          0	/* xt_wini.c - use Western's autoconfig BIOS */
+#define C_RS232_INT_HANDLERS 0	/* rs232.c - use slower C int handlers */
+#define DEFAULT_CLASS      0	/* floppy.c - 3 or 5 to get only that size */
+#define LINEWRAP           0	/* console.c - wrap lines at column 80 */
+#define NO_HANDSHAKE       1	/* rs232.c - don't use CTS/RTS handshaking */
+
+/* These configuration defines control debugging and unfinished code. */
+#define FLOPPY_TIMING      0	/* floppy.c - for fine tuning floppy driver */
+#define MONITOR		   0	/* xt_wini.c - monitor loop in w_wait_int */
+#define RECORD_FLOPPY_SKEW 0	/* floppy.c - for deciding nr_sectors */
+
+/* These configuration defines control worthless code. */
+#define SPARE_VIDEO_MEMORY 0	/* misc.c - use memory from any 2nd vid card */
+#define SPLIMITS           0	/* mpx*.x - set stack limits (never checked) */
+
+#if (MACHINE == ATARI)
+/* this define says whether the keyboard generates VT100 or IBM_PC escapes */
+#define KEYBOARD	   VT100 /* either VT100 or IBM_PC */
+#define VT100		   100
+/* IBM_PC is already defined above. Use IBM_PC to be Minix ST 1.1 compatible */
+
+/* the next define says whether you have SUPRA or ATARI extended partitioning */
+/* hook for future extensions; not yet implemented; not yet used */
+#define PARTITIONING	   SUPRA /* either SUPRA or ATARI */
+#define SUPRA		   1
+/* ATARI is already defined */
+
+/* define the number of hard disk drives on your system */
+/* (assuming 2 drives/controller) */
+#define NR_DRIVES	   1	/* typically 0 or 1 */
+#endif
+
+
+/*===========================================================================*
+ *	There are no user-settable parameters after this line		     *
+ *===========================================================================*/
+/* Set the CHIP type based on the machine selected. The symbol CHIP is actually
+ * indicative of more than just the CPU.  For example, machines for which
+ * CHIP == INTEL are expected to have 8259A interrrupt controllers and the
+ * other properties of IBM PC/XT/AT/386 types machines in general. */
+#define INTEL             1	/* CHIP type for PC, XT, AT, 386 and clones */
+#define M68000            2	/* CHIP type for Atari, Amiga, Macintosh    */
+#define SPARC             3	/* CHIP type for SUN-4 (e.g. SPARCstation)  */
+
+#if MACHINE == IBM_PC
+#define CHIP           INTEL
+#endif
+
+#if (MACHINE == ATARI) | (MACHINE == AMIGA) | (MACHINE == MACINTOSH)
+#define CHIP          M68000
+#endif
+
+#if (MACHINE == SUN_4)
+#define CHIP           SPARC
+#endif
+
+#if MACHINE == ATARI
+#define ASKDEV             1	/* ask for boot device */
+#define FASTLOAD           1	/* use multiple block transfers to init ram */
+#endif
+
+/* The file buf.h uses MAYBE_WRITE_IMMED. */
+#if ROBUST
+#define MAYBE_WRITE_IMMED  WRITE_IMMED	/* slower but perhaps safer */
+#else
+#define MAYBE_WRITE_IMMED  0		/* faster */
+#endif
+
+#ifndef MACHINE
+#error "In <minix/config.h> please define MACHINE"
+#endif
+
+#ifndef CHIP
+#error "In <minix/config.h> please define MACHINE to have a legal value"
+#endif
+
+#if (MACHINE == 0)
+#error "MACHINE has incorrect value (0)"
+#endif