diff --git a/mach/z8000/as/mach5.c b/mach/z8000/as/mach5.c index 6d51daad5..065648a03 100644 --- a/mach/z8000/as/mach5.c +++ b/mach/z8000/as/mach5.c @@ -9,21 +9,21 @@ int type; { oprtype[ operand ] = type; } -short twolog( s ) -short s; -{ short twopower = 0; +int twolog( s ) +int s; +{ int twopower = 0; while ( (s>>=1) != 0 ) twopower++; return( twopower ); } setmode( opr ) -short opr; +int opr; { mode = modetbl[ twolog( oprtype[opr] ) ] << 12; } chtype( opr, typerange ) -short opr, +int opr, typerange; /* Check type of 'opr' with given 'typerange' and ** set the global var 'mode'. @@ -34,7 +34,7 @@ short opr, chreg( opc, reg ) -short opc, reg; +int opc, reg; { switch( opc ) { case 0xB10A: case 0x1B00: case 0x1900: /* R32 expected */ if (reg & 1) regerr(); break; @@ -62,8 +62,7 @@ expr_t ad_inf; /* When the type of an operand is 'da' or 'x' this function ** emits the address. */ -{ short sm; - ATYPE addr; +{ ATYPE addr; addr = checkaddr( ad_inf.val ); /* Always the long format is emitted, because the binary @@ -95,14 +94,14 @@ valu_t absval; branch( opc, exp ) -short opc; +int opc; expr_t exp; /* This routine determines for the F3 format instructions whether the ** relative address is small enough to fit in normal code; If this is ** so normal code is emitted otherwise 'long' code is emitted contai- ** ning the direct address. */ -{ short longopc = 0, reladdr = 0, sm2, sm4; +{ int longopc = 0, reladdr = 0, sm2, sm4; valu_t val; ATYPE addr; @@ -122,7 +121,7 @@ expr_t exp; longopc = 0x5F00; break; } - sm4 = sm2 || fit8( (short)exp.val ); + sm4 = sm2 || fit8( (int)exp.val ); } switch ( opc & 0xF000 ) { case DJNZ_: fit( sm2 ); /* djnz must be short */ @@ -147,7 +146,7 @@ expr_t exp; ldrel( opc, exp ) -short opc; +int opc; expr_t exp; /* This routine determines for the F4 format instructions whether the ** address is within the same segment (meaning a relative address of @@ -157,7 +156,7 @@ expr_t exp; { if ( pass >= PASS_2 && (exp.typ & ~S_DOT) != DOTTYP ) serror( "relative too far" ); emit2( opc ); - emit2( (short)adjust(exp.val) ); + emit2( (int)adjust(exp.val) ); }