Added i386_as.6

man/.distr

@@ -5,6 +5,7 @@
 8080_as.6
 z8000_as.6
 i86_as.6
+i386_as.6
 m68k2_as.6
 ns_as.6
 pdp_as.6

man/i386_as.6

@@ -0,0 +1,110 @@
+.\" $Header$
+.TH I386_AS 6ACK
+.ad
+.SH NAME
+i386_as \- assembler for Intel 80386
+.SH SYNOPSIS
+~em/lib/i386/as [options] argument ...
+.SH DESCRIPTION
+This assembler is made with the general framework
+described in \fIuni_ass\fP(6). It is an assembler generating relocatable
+object code in \fIack.out\fP(5) format.
+.SH SYNTAX
+.IP segments
+An address on the Intel 80386 consists of two pieces:
+a segment number and an offset.
+Usually, the segment number resides in a segment register, and
+assembly language addresses only give the offset, with the exception of
+the address of an inter-segment jump or call (see \fIaddressing modes\fP
+below).
+.IP registers
+The Intel 80386 has the following 32-bit registers:
+.br
+Four general registers: eax (accumulator), ebx (base), ecx (count), and edx (data).
+The low- and high order bytes of the low order words of these registers
+are separately addressable as ah, bh, ch, dh, and al, bl, cl, dl respectively.
+.br
+Two pointer registers: esp (stack pointer) and ebp (base pointer).
+.br
+Two index registers: esi (source index) and edi (destination index).
+.br
+Six segment registers: cs (code), ds (data), ss (stack), es (extra),
+fs (extra), and gs (extra).
+.IP "addressing modes"
+.nf
+.ta 8n 16n 24n 32n 40n 48n
+syntax		meaning
+
+expr		the value of \fIexpr\fP is immediate data or
+		an address offset. There is no special
+		notation for immediate data.
+
+register	one of the aforementioned general registers
+		or their upper or lower halves, or one of the
+		four segment registers.
+
+(expr)		the value of expr is the address of the operand.
+
+(reg)
+expr (reg)	the value of \fIexpr\fP (if present) + the contents of
+		\fIreg\fP (which must be a pointer or an index register)
+		is the address of the operand.
+
+(reg1) (reg2)
+expr (reg1) (reg2)
+		the value of \fIexpr\fP (if present) + the contents of
+		\fIreg1\fP + the
+		contents of \fIreg2\fP is the address of the operand.
+
+(reg1) (reg2 * scale)
+expr (reg1) (reg2 * scale)
+		the value of \fIexpr\fP (if present) + the contents of
+		\fIreg1\fP + the
+		contents of \fIreg2\fP multiplied by \fIscale\fP,
+		is the address of the operand.
+		\fIscale\fP can be either 1, 2, 4, or 8.
+
+The next addressing mode is only allowed with the instructions
+"callf" or "jmpf".
+
+expr : expr	the value of the first \fIexpr\fP is a segment number,
+		the value of the second \fIexpr\fP is an address offset.
+
+The following two addressing modes are only allowed with Intel 80[23]87 floating
+point processor instructions:
+
+st
+st(num)		addresses the floating point processor stack. \fInum\fP
+		must be between 0 and 7. st is the same as st(0).
+
+.fi
+
+.IP prefixes
+Each time an address is computed the processor decides which segment register
+to use. You can override the processor's choice by prefixing the instruction
+with one of eseg, cseg, sseg, dseg, fseg, or gseg; these prefixes indicate that the
+processor should choose es, cs, ss, ds, fs, or gs instead.
+.br
+Example: 
+.ti +8
+dseg movs
+.IP ""
+There is also an address size toggle, which switches between 32-bit and
+16-bit address generation: a16 or a32. Normally, the assembler generates
+32-bit addresses; both of these toggles make it generate 16-bit addresses
+for the next instruction, and also generate code to set the processor 
+temporarily in 16-bit address mode.
+.IP ""
+There is also an operand size toggle, which switches between 32-bit and
+16-bit operands: o16 or o32. Normally, the assembler generates
+32-bit operands; both of these toggles make it generate 16-bit operands
+for the next instruction, and also generate code to set the processor 
+temporarily in 16-bit operand mode.
+.IP ""
+Prefixes only affect the next instruction.
+.SH "SEE ALSO"
+uni_ass(6),
+ack(1),
+ack.out(5),
+.br
+80386 Programmer's Reference Manual, 1986, Intel Corporation