Always use 'kills ALL' when reaching a label, because our registers
and tokens have the wrong values if the program jumps to this label
from somewhere else.
When falling through a label, if the top element is in r3, then
require that the rest of the stack is in the real STACK, not in
registers or tokens.
I'm doing this to be certain that the missing constraints are not
causing bugs. I did not find any such bug, perhaps because the labels
are usually near other instructions (like conditional branches and
function calls) that stack or kill tokens.
This is for fef 8 and fif 8. I changed .fef8 so it no longer kills
r7, but I don't want to update the list. We already use "kills ALL"
for most other calls to libem.
The new features are the hi16/lo16 and ha16/lo16 syntax for
relocations, and the extended mnemonics like "blr".
Use ha16/lo16 to load some double floats with 2 instructions (lis/lfd)
instead of 3 (lis/ori/lfd).
Use the extended names for branches, comparisons, and bit rotations,
so I can more easily read the code. The new names often encode the
same machine instructions as the old names, except in a few places
where I changed the instructions.
Stop using andi. when we don't need to set cr0. In inn.s, I change
andi. to extrwi to extract the same bits. In los.s and sts.s, I
change "andi. r3, r3, ~3" to "clrrwi r3, r3, 2". This avoids setting
cr0 and also stops clearing the high 16 bits of r3.
In csa.s, los.s, sts.s, I change some comparisons and right shifts
from signed to unsigned (cmplw, cmplwi, srwi), because the sizes are
unsigned. In inn.s, the right shift can be signed (sraw) or unsigned
(srw), but I use srw because we don't need the carry bit.
In fef8.s, I save an instruction by using rlwinm instead of addis/andc
to rlwinm to clear a field. The code no longer kills r7. In both
fef8.s and fif8.s, I remove the list of killed registers.
Also remove some whitespace from ends of lines.
Also make a few changes to basic mnemonics. Fix typo in name of the
basic "creqv". Add the basic "addc" and relatives, because it would
be odd to have the extended "subc" without "addc". Fix the basic
"rldicl", "rldicr", "rldic", "rldimi" to correctly encode the 6-bit MB
field. Fix "slw" and relatives to correctly swap their RA and RS
operands.
Add many, but not all, of the extended mnemonics from IBM's Power ISA
Version 2.06 Book I Appendix E. (I used 2.06, published 2009, just
because I already had the PDF of it.) This commit includes mnemonics
for branching, subtraction, traps, bit rotation, and a few others,
like "mflr" and "nop". The assembler now understands branches like
`beq cr7, label` and bit shifts like `slwi r7, r7, 2`. These encode
the same machine instructions as the basic "bc" and "rlwinm".
Some operands to basic names become optional. The assembler no longer
requires the level in "sc" or the branch hint in "bcctr" and "bclr";
they default to zero. Some extended names take an optional branch
hint or condition register.
Some extended names are still missing. I don't provide names with
static branch prediction, like "beq+" or "bge-", because the assembler
parses '+' and '-' as operators, not as part of an instruction name.
I also don't provide some names that 2.06 has for moving to or from
the condition register or some special purpose registers, names like
"mtcr" or "mfuamr".
This commit also deletes some unused tokens and one unused yacc rule.
I need this so I can add more %token lines to mach/powerpc/as/mach2.c
The assembler's tempfile encoded each token in a byte. This only
worked with tokens 0 to 127 and 256 and 383. If a token 384 or higher
existed, the assembler stopped working. I need tokens 384 and higher.
I change the token encoding to a 2-byte little-endian integer. I also
change a byte in the string encoding.
See issue #1 (https://github.com/davidgiven/ack/issues/1). The file
mach/proto/as/comm2.y goes through cpp twice. The _include macro,
defined in comm2.y and used in comm0.h, delays the inclusion of system
header files. The inclusion of <stdint.h> wasn't delayed. This
caused multiple inclusions of <sys/_types.h> in FreeBSD and
<machine/_types.h> in OpenBSD.
Use _include to delay <stdint.h>. Also use _include for "arch.h" and
"out.h", because h/out.h includes <stdint.h> and h/arch.h might
include it in the future.
Sort the system includes in comm0.h by moving them up to be with
<stdint.h>. Must include <stdint.h> before "mach0.c", because
mach/powerpc/as/mach0.c needs it. Must include "mach0.c" before
checking ASLD.
In my OpenBSD/amd64 system, the code becomes
if (0)
outname.on_valu &= ~(((0xFFFFFFFF)<<32)<<32);
The 0xFFFFFFFF is a 32-bit int, so the left shift by 32 is out of
range and causes the gcc warning.
The intent might be to clear any sign-extended bits, if the assignment
outname.on_valu = valu did sign extension. Old C had no unsigned
long, so .on_valu would have been long. The code is obsolete because
h/out.h now declares .on_valu as uint32_t.
possible values. Add the PowerPC ncg and mcg backend support to let the test
actually run, including modifying a bunch of PowrePC libem functions so that
they can be called from both ncg and mcg.
assembler directives, ha16() and has16(), for the upper half; has16() applies
the sign adjustment. .powerpcfixup is now gone, as we generate the relocation
in ha*() instead. Add special logic to the linker for undoing and redoing the
sign adjustment when reading/writing fixups. Tests still pass.
This provides and, ior, xor, com, zer, set, cms when defined($1) and
ior, set when !defined($1). I don't provide the other operations
!defined($1) because our Modula-2 compiler hasn't used them.
I wrote a Modula-2 example in
https://gist.github.com/kernigh/add79662bb3c63ffb7c46d01dc8ae788
Put a dummy comment in mach/powerpc/libem/build.lua so git checkout
will touch that file. Without the touch, the build system doesn't see
the new *.s files.
We only implement 'los 4', 'sts 4', 'cmi 4', 'cmu 4', not for sizes
other than 4. Add clause $1==4.
We only implement inn when defined($1).
The rule for aar needs 'kills ALL' because it kills many registers,
like other rules that call libem.
This allows 'move {CONST, $1}, R3' with a small enough $1 to emit one
instruction (addi) instead of two instructions (addis, ori). The
CONST token confusingly isn't in the CONST_ALL set.
The spec says, "ASS w: Adjust the stack pointer by w-byte integer".
The w argument "can either be given as argument or on top of the
stack." Therefore, 'ass 4' would pop the 4-byte integer from the
stack, but 'ass' would pop the size w from the stack, then pop the
w-byte integer.
PowerPC ncg wrongly implemented 'ass' as if it was 'ass 4'. Fix it to
accept only 'ass 4'.
These instructions would load or store the EM heap pointer. They
don't work. Programs must use brk() or sbrk() in libsys.
The last file to use 'lor 2' and 'str 2' was lang/pc/libpc/sav.e in
the Pascal library. Commit c084f9f deleted the file, so we no longer
need rules 'lor 2' or 'str 2' to build the ACK.
PowerPC has a few hundred special-purpose registers. The assembler
had only accepted the names "xer", "lr", "ctr". Most programs use
only those three SPRs. If I add more names, they would almost never
get used, and they might conflict with labels.
I want to use "mfspr r3, 0x3f0" and "mtspr 0x3f0, r3" in
plat/qemu/boot.s to access register hid0 from supervisor mode.
corresponding invocation in the ncg table so the same helpers can be used for
both mcg and ncg. Add a new IR opcode, FARJUMP, which jumps to a helper
function but saves volatile registers.
occasionally the first hop of a block would try to rearrange its registers (due
to evicted throughs), resulting in the phi moves copying values into the wrong
registers.
