This relocation is specific to PowerPC. @davidgiven suggested the
name RELOPPC_LIS in
https://github.com/davidgiven/ack/pull/52#issuecomment-279856501
Reindent the list in h/out.h and util/led/ack.out.5 because
RELOLIS_PPC is a long name. I use spaces and no tabs because the tabs
looked bad in the manual page.
The new relocation type RELOLIS handles these instructions:
lis RT, ha16[expr] == addis RT, r0, ha16[expr]
lis RT, hi16[expr] == addis RT, r0, hi16[expr]
RELOLIS stores a 32-bit value in the program text. In this value, the
high bit is a ha16 flag, the next 5 bits are the target register RT,
and the low bits are a signed 26-bit offset. The linker replaces this
value with the lis instruction.
The old RELOPPC relocated a ha16/lo16 or hi16/lo16 pair. The new
RELOLIS relocates only a ha16 or hi16, so it is no longer necessary to
have a matching lo16 in the next instruction. The disadvantage is
that RELOLIS has only a signed 26-bit offset, not a 32-bit offset.
Switch the assembler to use RELOLIS for ha16 or hi16 and RELO2 for
lo16. The li32 instruction still uses the old RELOPPC relocation.
This is not the same as my RELOPPC change from my recent mail to
tack-devel (https://sourceforge.net/p/tack/mailman/message/35651528/).
This commit is on a different branch. Here I am throwing away my
RELOPPC change and instead trying RELOLIS.
assembler directives, ha16() and has16(), for the upper half; has16() applies
the sign adjustment. .powerpcfixup is now gone, as we generate the relocation
in ha*() instead. Add special logic to the linker for undoing and redoing the
sign adjustment when reading/writing fixups. Tests still pass.
calculated incorrectly because of overflow errors.
Replace it with an extended RELOPPC relocation which understands addis/ori
pairs; add an la pseudoop to the assembler which generates these and the
appropriate relocation. Make good.
--HG--
branch : dtrg-experimental-powerpc-branch
the number of types of relocation possible in the object file. (Now,
hopefully, working.)
Also change the object serialiser/deserialiser to never try to read or
write raw structures; it's way safer this way and we don't need the
performance boost any more.
--HG--
branch : default-branch
