Remove some declarations (not all correct) and #include <errno.h>,
<time.h>, and <unistd.h> to get the correct declarations.
Disable mount(2), umount(2), and stime(2) because BSD (around
4.3BSD-Reno) lost compatibility with these Unix v7 functions.
em libmon vanished decades ago (or never existed), and also ass appears to have
a different idea of what the em opcodes are to everything else and gets
confused.
CS eliminates outer expressions before inner ones, as `x * y * z`
before `x * y`. It does this by reversing the order of expressions in
the code. This almost always works, but it sometimes doesn't work if
a STI changes the value number of a LOI. In code like `expr1 LOI
expr2 STI expr2 LOI`, CS might eliminate the inner `expr2` before the
outer `expr2 LOI`. This caused a read after free because the
occurrence of `expr2 LOI` pointed to the eliminated lines of `expr2`.
This bug went unnoticed until my recent changes caused CS to crash
with a double free. I did not get the crash in OpenBSD, but I saw the
crash in Travis, then David Given reproduced the crash in Linux. See
the discussion in https://github.com/davidgiven/ack/pull/73
the -U command line option, and one via file scanning. Turns out only the
second would increment the number of global names, so adding names with -U
would cause names found via scanning to fall off the end of the list! This
wouldn't cause linker errors because fixups don't use the list, but would cause
the generated symbol table in the output to be incorrect.
Enable this in CS for PowerPC; disable it for all other machines.
PowerPC has no remainder instruction; the back end uses division to
compute remainder. If CS finds both a / b and a % b, then CS now
rewrites a % b as a - b * (a / b) and computes a / b only once. This
removes an extra division in the PowerPC code, so it saves both time
and space.
I have not considered whether to enable this optimization for other
machines. It might be less useful in machines with a remainder
instruction. Also, if a % b occurs before a / b, the EM code gets a
DUP. PowerPC ncg handles this DUP well; other back ends might not.
In ego, the CS phase may convert a LAR/SAR to AAR LOI/STI so it can
optimize multiple occurrences of AAR of the same array element. This
conversion should not happen if it would LOI/STI a large or unknown
size.
cs_profit.c okay_lines() checked the size of each occurrence of AAR
except the first. If the first AAR was the implicit AAR in a LAR/SAR,
then the conversion happened without checking the size. For unknown
size, this made a bad LOI -1 or STI -1. Fix by checking the size
earlier: if a LAR/SAR has a bad size, then don't enter it as an AAR.
This Modula-2 code showed the bug. Given M.def:
DEFINITION MODULE M;
TYPE S = SET OF [0..95];
PROCEDURE F(a: ARRAY OF S; i, j: INTEGER);
END M.
and M.mod:
(*$R-*) IMPLEMENTATION MODULE M;
FROM SYSTEM IMPORT ADDRESS, ADR;
PROCEDURE G(s: S; p, q: ADDRESS; t: S); BEGIN
s := s; p := p; q := q; t := t;
END G;
PROCEDURE F(a: ARRAY OF S; i, j: INTEGER); BEGIN
G(a[i + j], ADR(a[i + j]), ADR(a[i + j]), a[i + j])
END F;
END M.
then the bug caused an error:
$ ack -mlinuxppc -O3 -c.e M.mod
/tmp/Ack_b357d.g, line 57: Argument range error
The bug had put LOI -1 in the code, then em_decode got an error
because -1 is out of range for LOI.
Procedure F has 4 occurrences of `a[i + j]`. The size of `a[i + j]`
is 96 bits, or 12 bytes, but the EM code hides the size in an array
descriptor, so the size is unknown to CS. The pragma `(*$R-*)`
disables a range check on `i + j` so CS can work. EM uses AAR for the
2 `ADR(a[i + j])` and LAR for the other 2 `a[i + j]`. EM pushes the
arguments to G in reverse order, so the last `a[i + j]` in Modula-2 is
the first LAR in EM.
CS found 4 occurrences of AAR. The first AAR was an implicit AAR in
LAR. Because of the bug, CS converted this LAR 4 to AAR 4 LOI -1.
- In share/debug.c, undo my mistake in commit 9037d13 by changing
vfprintf back to fprintf in OUTTRACE.
- In ud/ud.c, move the trace output from stdout to stderr, because
stdout has ego's output file, which becomes opt2's input file. If
trace output goes to stdout, it gets prepended to the output file,
and opt2 errors with "wrong input file".
I also edit both build.lua files so ego depends on its header files;
this part isn't needed for -DTRACE.
One can now use -DTRACE by adding it to the cflags in both build.lua
files.
I made a syntax error in some .e file, and em_encode dumped core
because a 64-bit pointer didn't fit in a 32-bit int. Now use stdarg
to pass pointers to error() and fatal().
Stop using the number of errors as the exit status. Many systems use
only the low 8 bits of the exit status, so 256 errors would become 0.
Also change modules/src/print to accept const char *buf
This uncovers a problem in il/il_aux.c: it passes 3 arguments to
getlines(), but the function expects 4 arguments. I add FALSE as the
4th argument. TRUE would fill in the list of mesregs. IL uses
mesregs during phase 1, but this call to getlines() is in phase 2.
TRUE would leak memory unless I added a call to Ldeleteset(mesregs).
So I pass FALSE.
Functions passed to go() now have a `void *` parameter because
no_action() now takes a `void *`.
*Important:* Do `make clean` to work around a problem and prevent
infinite rebuilds, https://github.com/davidgiven/ack/issues/68
I edit tokens.g in util/LLgen/src, so I regenerate tokens.c. The
regeneration script bootstrap.sh can't find LLgen, but I can run the
same command by typing the path to llgen.
Silence warning from clang at `if (ch2 = ...)`
Delete `|| rm %{outs}` in build.lua, because it hid the exit status of
tabgen, so if tabgen failed, the build continued and failed later.
Edit build.lua for programs losing their private assert.h, so they
depend on a list of .h files excluding assert.h.
Remove modules/src/assert; it would be a dependency of cpp.ansi but we
didn't build it, so cpp.ansi uses the libc assert.
I hope that libc <assert.h> can better report failed assertions. Some
old "assert.h" files didn't report the expression. Some reported a
literal "x", because traditional C expanded the macro parameter x in
"x", but ANSI C89 doesn't expand macro parameters in string literals.
Because of the accidental deletion, mcgg on my machine followed a
garbage pointer, and never wrote calls to emit_fragment.
A wrong call to `data->emit_reg(0, 0)` instead of the correct
`data->emit_fragment(0)` caused PowerPC mcg to emit an empty string
instead of `8(fp)`, causing a syntax error in PowerPC as.
The wrong `data->emit_reg(0, 0)` called the function emit_reg() in
mach/proto/mcg/pass_instructionselection.c, but that function
unfortunately has `if (vreg) { ... }`. The call had vreg == NULL
because the fragment wasn't a vreg, but emit_reg() ignored the problem
and emit nothing.
@dram reported a build failure in FreeBSD at
https://github.com/davidgiven/ack/issues/1#issuecomment-273668299
Linux manual for getopt(3) says:
> If the first character of optstring is '-', then each nonoption
> argv-element is handled as if it were the argument of an option with
> character code 1....
>
> The use of '+' and '-' in optstring is a GNU extension.
GNU/Linux and OpenBSD handle '-' in this special way, but FreeBSD
seems not to. If '-' is not special, then em_ego can't find its input
file, so the build must fail. This commit stops using '-' in both
em_b and em_ego, but doesn't change mcg.
Also fix em_ego -O3 to not act like -O4.
This is more useful when looking for patterns; lino - 1 is probably
the line number in the patterns file. DIAGOPT is off by default but
one can edit optim.h to enable it.
The other changes just clean up whitespace.
In util/ncgg, add two more errors for tables using reglap:
- "Two sizes of reg_float can't be same size"
- "Missing reg_float of size %d to contain %s"
In mach/proto/ncg, rename macro isregvar_size() to PICK_REGVAR(), so
the macro doesn't look like a function. This macro sometimes doesn't
evaluate its second argument.
In mach/powerpc/ncg/mach.c, change type of lfs_set to uint32_t, and
change the left shifts from 1U<<regno to (uint32_t)1<<regno, because
1U would be too small for machines with 16-bit int.
This relocation is specific to PowerPC. @davidgiven suggested the
name RELOPPC_LIS in
https://github.com/davidgiven/ack/pull/52#issuecomment-279856501
Reindent the list in h/out.h and util/led/ack.out.5 because
RELOLIS_PPC is a long name. I use spaces and no tabs because the tabs
looked bad in the manual page.
If the ncg table uses reglap, then regvar($1, reg_float) would have
two sizes of registers. An error from ncgg would happen if regvar()
was in a token that allows only one size. Now one can pick a size
with regvar_w() for word size or regvar_d() for double-word size.
Add regvar_d and regvar_w as keywords in ncgg. Modify EX_REGVAR to
include the register size. In ncg, add some checks for the register
size. In tables without reglap, regvar() works as before, and ncg
ignores the register size in EX_REGVAR.
This merges several fixes and improvements from upstream. This
includes commit 5f6a773 to turn off qemuppc. I see several failing
tests from qemuppc; this merge will hide the test failures.
The new feature "reglap" allows two sizes of floating-point register
variables (reg_float), if each register overlaps a single register of
the other size. PowerPC ncg uses reglap to define 4-byte instances
of f14 to f31 that overlap the 8-byte instances.
When ncgg sees the definition of fs14("f14")=f14, it removes the
8-byte f14 from its rvnumbers array, and adds the 4-byte fs14 in its
place. Later, when ncg puts a variable in fs14, if it is an 8-byte
variable, then ncg switches to the 8-byte f14. The code has
/* reglap */ comments in util/ncgg or #ifdef REGLAP in mach/proto/ncg
reglap became necessary because my commit a20b87c caused PowerPC ego
to allocate reg_float in both 4-byte and 8-byte sizes.
same base name and generate multiple files based on it, we can't really use
mkstemp() for every temporary file. Instead, use mkstemp() once on a
placeholder, then generate temporary names based on this. (And delete the
placeholder once we've finished.)
The size of a reg_float isn't in the descr file, so ego doesn't know.
PowerPC and SPARC are the only arches with floating-point registers in
their descr files. PowerPC and SPARC registers can hold both 4-byte
and 8-byte floats, so I want ego to do both sizes.
This might break our SPARC code expander because ego doesn't know that
8-byte values take 2 registers in SPARC. (So ego might allocate too
many registers and deallocate too much stack space.) We don't build
the SPARC code expander, and its descr file is already wrong: its list
of register save costs is too short, so ego will read past the end of
the array.
This commit doesn't fix the problem with ego and PowerPC ncg. Right
now, ncg refuses to put 4-byte floats in registers, but ego expects
them to get registers and deallocates their stack space. So ncg emits
programs that use the deallocated space, and the values of 4-byte
floats become corrupt.
Use f14 to f31 as register variables for 8-byte double-precison.
There are no regvars for 4-byte double precision, because all
regvar(reg_float) must have the same size. I expect more programs to
prefer 8-byte double precision.
Teach mach/powerpc/ncg/mach.c to emit stfd and lfd instructions to
save and restore 8-byte regvars. Delay emitting the function prolog
until f_regsave(), so we can use one addi to make stack space for both
local vars and saved registers. Be more careful with types in mach.c;
don't assume that int and long and full are the same.
In ncg table, add f14 to f31 as register variables, and some rules to
use them. Add rules to put the result of fadd, fsub, fmul, fdiv, fneg
in a regvar. Without such rules, the result would go in a scratch
FREG, and we would need fmr to move it to the regvar. Also add a rule
for pat sdl inreg($1)==reg_float with STACK, so we can unstack the
value directly into the regvar, again without a scratch FREG and fmr.
Edit util/ego/descr/powerpc.descr to tell ego about the new float
regvars. This might not be working right; ego usually decides against
using any float regvars, so ack -O1 (not running ego) uses the
regvars, but ack -O4 (running ego) doesn't use the regvars.
Beware that ack -mosxppc runs ego using powerpc.descr but -mlinuxppc
and -mqemuppc run ego without a config file (since 8ef7c31). I am
testing powerpc.descr with a local edit to plat/linuxppc/descr to run
ego with powerpc.descr there, but I did not commit my local edit.
I hastily chose the name RELOLIS for this relocation type. If we want
to rename it, we only need to edit these files:
- h/out.h
- mach/powerpc/as/mach5.c
- util/amisc/ashow.c
- util/led/ack.out.5
- util/led/relocate.c
The new relocation type RELOLIS handles these instructions:
lis RT, ha16[expr] == addis RT, r0, ha16[expr]
lis RT, hi16[expr] == addis RT, r0, hi16[expr]
RELOLIS stores a 32-bit value in the program text. In this value, the
high bit is a ha16 flag, the next 5 bits are the target register RT,
and the low bits are a signed 26-bit offset. The linker replaces this
value with the lis instruction.
The old RELOPPC relocated a ha16/lo16 or hi16/lo16 pair. The new
RELOLIS relocates only a ha16 or hi16, so it is no longer necessary to
have a matching lo16 in the next instruction. The disadvantage is
that RELOLIS has only a signed 26-bit offset, not a 32-bit offset.
Switch the assembler to use RELOLIS for ha16 or hi16 and RELO2 for
lo16. The li32 instruction still uses the old RELOPPC relocation.
This is not the same as my RELOPPC change from my recent mail to
tack-devel (https://sourceforge.net/p/tack/mailman/message/35651528/).
This commit is on a different branch. Here I am throwing away my
RELOPPC change and instead trying RELOLIS.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
---snip---
The ELF spec at http://www.sco.com/developers/gabi/ says, "In each
symbol table, all symbols with STB_LOCAL binding precede the weak and
global symbols," and that sh_info is the index of the first non-local
symbol.
I was mixing local and global symbols and setting sh_info to zero. I
also forgot to set the type of the .shstrtab section.
---snip---
assembler directives, ha16() and has16(), for the upper half; has16() applies
the sign adjustment. .powerpcfixup is now gone, as we generate the relocation
in ha*() instead. Add special logic to the linker for undoing and redoing the
sign adjustment when reading/writing fixups. Tests still pass.
Convert each ack.out symbol to ELF, preserving its name and value, and
some but not all other symbol info. The ELF symbol table comes with
ELF section headers. If the input file has no symbols (ack -Rled-s),
then the output file has no ELF section headers.
Append the symbol table and section headers to the ELF file. Linux
ignores this appended info when it execs the file. The info might
pollute the last page of the ELF segment, but Linux clears this
pollution. Tools like nm and gdb can read the ELF symbol table.
I include code to translate debugger symbols to an ELF .stab section.
I did not test this code, because I did not find a platform that can
put S_STB symbols in the ack.out file.
Put end of sentence at end of line. This is roff(7) syntax so the
formatter can make spacing between sentences.
Use the macro .PP to break paragraphs. Use bold for the command name
in SYNOPSIS, to match other ack manuals.
No change to linuxppc and qemuppc. They continue to run ego without
any descr file.
I copied m68020.descr to powerpc.descr and changed some numbers. My
numbers are guesses; I know little about PowerPC cycle counts, and
almost nothing about ego. This powerpc.descr causes most of the
example programs to shrink in size (without descr -> with descr):
65429 -> 57237 hilo_b.osxppc -8192
36516 -> 32420 hilo_c.osxppc -4096
55782 -> 51686 hilo_mod.osxppc -4096
20096 -> 20096 hilo_p.osxppc 0
8813 -> 8813 mandelbrot_c.osxppc 0
93355 -> 89259 paranoia_c.osxppc -4096
92751 -> 84559 startrek_c.osxppc -8192
(Each file has 2 Mach segments, then a symbol table. Each segment
takes a multiple of 4096 bytes. When the code shrinks, we lose a
multiple of 4096 bytes.)
I used "ack -mosxppc -O6 -c.so" to examine the assembly code for
hilo.mod and mandelbrot.c, both without and with descr. This reveals
optimizations made only with descr, from 2 ego phases: SP (stack
pollution) and RA (register allocation). In hilo.mod, SP deletes some
instructions that remove items from the stack. These items get
removed when the function returns. In both hilo.mod and mandelbrot.c,
RA moves some values into local variables, so ncg can make them into
register variables. This shrinks code size, probably because register
variables get preserved across function calls. More values stay in
registers, and ncg emits shorter code.
I believe that the ego descr file uses (time,space) tuples but the ncg
table uses (space,time) tuples. This is confusing. Perhaps I am
wrong, and some or all tuples are backwards. My time values are the
cycle counts in latency from the MPC7450 Reference Manual (but not
including complications like "store serialization").
In powerpc.descr, I give the cost for saving and restoring registers
as if I was using chains of stw and lwz instructions. Actually ncg
uses single stmw and lmw instructions with at least 2 instructions.
The (time,space) for stmw and lmw would be much less than the
(time,space) for chains of stw and lwz. But this ignores the pipeline
of the MPC7450. The chains of stw and lwz may run faster than stmw
and lmw in the pipeline, because the throughput may be better than the
latency. By using the wrong values for (time,space), I'm trying to
tell ego that stmw and lmw are not better than chains of stw and lwz.
This brings in David Given's PowerPC changes, including the addition
of the modern code generator (mcg) for PowerPC.
Resolve minor conflicts in top build.lua and util/led/main.c
This uses uint32_t for the base, file offset, and alignment of each
section, to be consistent with the usage of uint32_t in h/out.h
Also declare setbit() as static.
corresponding invocation in the ncg table so the same helpers can be used for
both mcg and ncg. Add a new IR opcode, FARJUMP, which jumps to a helper
function but saves volatile registers.
