The new .seek assembler pseudo-op advances the location
counter to a fixed offset within a section --- or to a fixed
address, if the section is a .base'd section. It works
somewhat like the GNU assembler's .org pseudo-op, though
with a hopefully less confusing name.
This pseudo-op lets us avoid having to manually compute the
needed boot sector padding in the pc86 start-up code
plat/pc86/boot.s .
If a .c file included "types.h" before "mach.h", then it missed the
declaration of mach_option(). Fix by adding "xmach.h".
Fix mach/powerpc/ncg/mach.h and mach/vc4/ncg/mach.h to use the correct
type in their printf() format strings.
Also add `static` and remove `register` in mach/proto/top/top.c. A
static function is only in one file, so its function declaration may
go in that file, instead of a header file.
Edit C code to reduce warnings from clang. Most warnings are for
implicit declarations of functions, but some warnings want me to add
parentheses or curly braces, or to cast arguments for printf().
Make a few other changes, like declaring float_cst() in h/con_float to
be static, and using C99 bool in ego/ra/makeitems.c and
ego/share/makecldef.c. Such changes don't silence warnings; I make
such changes while I silence warnings in the same file. In
float_cst(), rename parameter `str` to `float_str`, so it doesn't
share a name with the global variable `str`.
Remove `const` from `newmodule(const char *)` in mach/proto/as to
silence a warning. I wrongly added the `const` in d347207.
For warnings about implicit declarations of functions, the fix is to
declare the function before calling it. For example, my OpenBSD
system needs <sys/wait.h> to declare wait().
In util/int, add "whatever.h" to declare more functions. Remove old
declarations from "mem.h", to prefer the newer declarations of the
same functions in "data.h" and "stack.h".
Most machines had undefined valu_t and redefined it to a different
type. Edit mach/*/as/mach0.c to remove such redefinitions, so the
next change to valu_t will affect all machines.
Edit mach/proto/as/comm0.h to change valu_t to int64_t, and add
uvalu_t and uint64_t.
Remove int64_t y_valu8 from the yacc %union, now that valu_t y_valu
can hold 64 bits. Replace y_valu8 with y_valu. The .data8 pseudo
becomes less special; it now accepts absolute expressions.
This change simplifies the assembler and seems to have no effect on
the assembled output. Among the files in share/ack/examples, the only
changes are in hilo_bas.* and startrek_c.linuxppc, but those files
seem to change whenever I rebuild them.
This takes literal integers, not expressions, because each machine
defines its own valu_t for expressions, but valu_t can be too narrow
for an 8-byte integer, and I don't want to change all the machines to
use a wider valu_t. Instead, change how the assembler parses literal
integers. Remove the NUMBER token and add a NUMBER8 token for an
int64_t. The new .data8 pseudo emits all 8 bytes of the int64_t;
expressions narrow the int64_t to a valu_t. Don't add any checks for
integer overflow; expressions and .data* pseudos continue to ignore
overflow when a number is too wide.
This commit requires int64_t and uint64_t in the C compiler to build
the assembler. The ACK's own C compiler doesn't have these.
For the assembler's temporary file, add NUMBER4 to store 4-byte
integers. NUMBER4 acts like NUMBER[0-3] and only stores a
non-negative integer. Each negative integer now takes 8 bytes (up
from 4) in the temporary file.
Move the `\fI` and `\fP` in the uni_ass(6) manual, so the square
brackets in `thing [, thing]*` are not italic. This looks nicer in my
terminal, where italic text is underlined.
edge splitting can cause new basic blocks to be added to the graph, but while
the graph itself gets properly rewritten the descriptor tables can't be updated
to take these into account, so they end up pointing at the wrong blocks. This
causes really hard-to-debug problems.
The new approach is to parse the descriptor blocks and then generate a
comparison chain. Brute force, but much easier for the compiler to reason
about.
need flt_arith any more. (And also generates them correctly on little-endian
systems.) as now parses numbers properly, doesn't trash memory all over the
place, and can handle negative numbers.
This drops 124 bytes from the mandelbrot command (from 15015 to 14891
bytes) but has almost no effect on performance; the command takes
about 144 seconds (in YAZE-AG) both before and after optimizing libfp.
This library is for software floating point. The i80 back end has
never implemented floating point, and might not be ready for libfp.
This commit only builds libfp without using it.
I edit first/build.lua and plat/build.lua to allow `ack -c.s`, then
use FP.script to edit the assembly code. I edit FP.script so it
writes the edited assembly code to stdout, not to the input file.
Using '-' might fail on platforms like FreeBSD. Commit 50a7031
stopped using '-' in the B compiler and ego. I now stop using '-' in
mcg, because I can now check that mcg still works.
Tests pass if one edits the top build.lua to uncomment "qemuppc" from
both vars.plats and vars.plats_with_tests, and one leaves mcg in
plat/qemuppc/descr.
Add or correct some EM instructions in treebuilder.c:
- "lof", "stf": handle negative offsets in load() and store().
- "cuu": add using IR_FROMUI.
- "lim", "sim": keep an entire word in ".ignmask", to be compatible
with mach/powerpc/libem/trp.s and ncg. We also keep a word in
".ignmask" in ncg for both i386 and m68020.
- "trp": pass trap number in register. See comment in
helper_function_with_arg().
- "sig": push the old value of .trppc on the stack.
- "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?":
connect to helper functions in libem.
- "blm", "bls": drop call to memmove() and use new helper ".bls4",
because tests/plat/structcopy_e.c can't call memmove().
- "xor s", "cms s": if s is large, fall back on helper function.
- "rol", "ror": add by decomposing each rotate into 4 IR ops.
- "rck s", "bls s": make fatal unless s is word size.
- "loi": push multiple loads in the correct order.
- "dup s", "exg s": if s is large, fall back on helper.
- "dus": add using new helper ".dus4".
- "lxl", "lxa": follow the static chain, not the dynamic chain.
- "lor 1": materialise the stack before pushing the stack pointer.
- "lor 2", "str 2": make fatal.
- "los", "sts": drop calls to memcpy() and use helpers ".los4" and
and ".sts4", so lang/m2/libm2/LtoUset.e starts working.
- "gto": correctly read descriptor.
Change mach/powerpc/mcg/table:
- ANY.L: add for "asp -8".
- LOAD.L: work around register corruption.
- COMPAREUL.I: add for "cms 8".
ncgg has parsed the optional conditional expression (optexpr) of each
splitting coercion since commit 72b83cc in 1985; but for almost 33
years, ncg has ignored the expression in c2_expr.
Few tables had conditional coercions (I only found them in arm and
m68020), and no tables had conditional splitting coercions, so this
only becomes a problem now as I try to add a conditional splitting
coercion to powerpc.
This breaks all machines because the declared return type void
disagrees with the implicit return type int (when I compile mach.c
with clang). Unbreak i386, i80, i86, m68020, powerpc, vc4 by adding
the return types to mach.c. We don't build any other machines; they
are broken since commit a46ee91 (May 19, 2013) declared void prolog()
and commit fd91851 (Nov 10, 2016) declared void mes(), with both
declarations in mach/proto/ncg/fillem.c.
Also fix mach/vc4/ncg/mach.c where type full is long, so fprintf()
must use "%ld" not "%d" to print full nlocals.
Files that #include "equiv.h" must do so after including "data.h", now
that a function prototype in equiv.h uses type rl_p from data.h.
Adjust style, changing some `for(...)` to `for (...)`. The style in
mach/proto/ncg is less than consistent; the big annoyance now is that
some files want tabs at 4 spaces, others want tabs at 8 spaces.
