Using '-' might fail on platforms like FreeBSD. Commit 50a7031
stopped using '-' in the B compiler and ego. I now stop using '-' in
mcg, because I can now check that mcg still works.
If X < 0, then lowering the addi might cause the code to use the stack
space before allocating it. This is a bug because an asynchronous
signal handler can overwrite the unallocated stack space.
Tests pass if one edits the top build.lua to uncomment "qemuppc" from
both vars.plats and vars.plats_with_tests, and one leaves mcg in
plat/qemuppc/descr.
Add or correct some EM instructions in treebuilder.c:
- "lof", "stf": handle negative offsets in load() and store().
- "cuu": add using IR_FROMUI.
- "lim", "sim": keep an entire word in ".ignmask", to be compatible
with mach/powerpc/libem/trp.s and ncg. We also keep a word in
".ignmask" in ncg for both i386 and m68020.
- "trp": pass trap number in register. See comment in
helper_function_with_arg().
- "sig": push the old value of .trppc on the stack.
- "and ?", "ior ?", "xor ?", "com ?", "cms ?", "set ?", "inn ?":
connect to helper functions in libem.
- "blm", "bls": drop call to memmove() and use new helper ".bls4",
because tests/plat/structcopy_e.c can't call memmove().
- "xor s", "cms s": if s is large, fall back on helper function.
- "rol", "ror": add by decomposing each rotate into 4 IR ops.
- "rck s", "bls s": make fatal unless s is word size.
- "loi": push multiple loads in the correct order.
- "dup s", "exg s": if s is large, fall back on helper.
- "dus": add using new helper ".dus4".
- "lxl", "lxa": follow the static chain, not the dynamic chain.
- "lor 1": materialise the stack before pushing the stack pointer.
- "lor 2", "str 2": make fatal.
- "los", "sts": drop calls to memcpy() and use helpers ".los4" and
and ".sts4", so lang/m2/libm2/LtoUset.e starts working.
- "gto": correctly read descriptor.
Change mach/powerpc/mcg/table:
- ANY.L: add for "asp -8".
- LOAD.L: work around register corruption.
- COMPAREUL.I: add for "cms 8".
- Don't reverse bitfields; do use ego (41f3bf7).
- Use MACHOPT_F=-m2 (3dae9e4).
- Remove old trap.s (26de4c1).
At this commit, one can build qemuppc with mcg by editing the root
build.lua to uncomment "qemuppc" in "vars.plats". If one also
uncomments "qemuppc" from "vars.plats_with_tests", then mcg fails to
build the tests. If one uses ncg (by editing plat/qemuppc/descr to
change "mcg" to "ncg"), then the tests pass.
You may need to delete and recompile some .o files! This changes the
alignment of 8-byte values in C structs to match what Apple's gcc
does. See Apple's "32-bit PowerPC Function Calling Conventions" at
https://developer.apple.com
/library/content/documentation/DeveloperTools/Conceptual/LowLevelABI
/100-32-bit_PowerPC_Function_Calling_Conventions/32bitPowerPC.html
In the instruction list, put /* kills xer */ for sraw, srawi, subfic;
and correct the (now unused) "addi." and "lfdu".
Change MACHOPT_F from -m3 to -m2. This changes the code for 15 * i
from
slwi r3,r4,4
subfic r5,r4,0
add r3,r3,r5
to
mulli r3,r4,15
If the sequence "slwi subfic addi" takes 3 cycles and 12 bytes, and
mulli takes 3 cycles and 4 bytes, then mulli is better.
Copy and adapt code from mach/{i386,m68020}/ncg/mach.c to pass the
debugging stabs from EM to assembly. The next tools (as, led, cv)
already know how to put the stabs in the Mach-o executable.
Modify the function prolog/prologue so gdb uses fp, not sp, for N_LSYM
and N_PSYM stabs. Simplify prolog() by reducing differences between
stabs and no stabs, and zero and nonzero framesize. For files without
stabs, the new prolog has the same number of instructions and memory
accesses as the old prolog, and to run at about the same speed on my
PowerPC Mac.
This is enough to see some info for global and local variables in gdb
for Mac OS X. I still can't get a backtrace; gdb gets confused
because EM and ncg don't link 0(sp) to the previous stack frame.
I don't expect `ack -mlinuxppc -g` to work with gdb for Linux, because
we prepend underscores to the symbol table, which is correct for
Mach-o but wrong for ELF.
This simplifies parts of the PowerPC table and causes ncg to better
decide whether to push sp or fp to the real stack, or coerce it to
REG3, or coerce it to REG-REG3, or move it to a regvar. These better
decisions remove extra _mr_ instructions.
The idea comes from mach/powerpc/arm/table, where SP has a property
STACKPOINTER and LB has LOCALBASE. I don't need two properties, so I
make one property SPFP for both registers.
When I wrote fef 8, I forgot to test denormalized numbers. Oops. Now
fix two of my mistakes:
- When checking for zero, `extrwi r6, r3, 22, 12` needs to be
`extrwi r6, r3, 20, 12`. There are only 20 bits to extract.
- After the multiplication by 2**64, I forgot to put the fraction in
[0.5, 1) or (-1, 0.5] by setting IEEE exponent = 1022.
Teach fif 8 about signed zero and NaN.
In ncg/table, change cmf so NaN is not equal to any value, and comment
why ordered comparisons don't work with NaN. Also add cost for
fctwiz, remove extra `uses REG`.
Edit comment in cfu8.s because the conditional branch might be before
or after fctwiz.
A signal handler might call sigaction(). We must block all signals,
not only our signal, to prevent a race between us and the next signal
handler.
Use /* comments */ because cpp might expand macros in ! comments
though such expansion is probably harmless.
The bridge is now shorter by 2 instructions.
Rename plat/linux/libsys/errno.s to plat/linux386/libsys/trapno.s and
stop building it for linux68k and linuxppc. It defines symbols for
mach/i386/libem.
In syscalls.h, the numbers after 165 are only for i386, so hide them
from 68k, ppc. These numbers are unused, because the system calls now
in libsys use the lower numbers.
Also teach the build system that libsys depends on the internal
headers in plat/linux/libsys/*.h
With my PowerBook G4, a program that converts values from 1.0 to
4000000.0 runs in about 0.32s with the old .cfu8 and 0.29s with this
shrunken .cfu8
Leave a comment about other ways to implement .cfu8
This reduces code size, because ncg emits too many "addi sp, sp, X"
instructions when unstacking things. Now top lowers "addi sp, sp, X"
by lifting other instructions. This sometimes creates chances to
merge or delete _addi_ instructions. If no such chance is found, the
_addi_ remains uselessly lowered.
Edit ncg/table to remove something that top now does.
Edit ncg/mach.c to remove some spaces after commas. This removes a
whitespace difference between *.s and *.so files, because top removes
the space.
_lim_ must use _loe_ (load word external), not _lde_ (load double-word
external).
The new patterns for _lxl_, _lxa_, _lor_, _str_ emit shorter code in
some cases. The change from GPR_EXPR to REG_EXPR allows moving
LXFRAME to a register variable.
Add more "reusing" clauses. We have enough registers that ncg almost
never reuses a register, but sometimes it can reuse r3.
In mach.c, emit one fewer instruction in procedures with no locals.
Fix PowerPC ncg so setjmp() returns the correct value. I got unlucky
when ncg picked r3 for "uses REG"; this destroyed the return value in
r3 and caused the new test to fail.
The new test rck_e.e segfaults on PowerPC unless I make some changes.
The inline code for _rck_ was wrong because it didn't allow the trap
handler to return. _sig_ forgot to push the old trap handler.
Move plat/linuxppc/libsys/trap.s to mach/powerpc/libem/trp.s and
rewrite it with simplified/extended mnemonics. Remove .trap alias for
.trp procedure. Add a missing `mtspr lr, r0` so we can return from
the trap handler. Call write() and _exit() so trp.s works with both
linuxppc and osxppc. Before, Mac OS X was wrongly using the trap.s
for Linux.
In powerpc/libem, simplify .aar4; teach .csa and .csb to raise the
trap if the default target is zero.
C programs don't need these changes. You may relink your C programs
with the changed .csa and .csb, but C code doesn't raise the trap.
Modula-2 code can raise traps, so you may want to relink your Modula-2
programs with the changed libem, but you might keep your old .o files
from Modula-2. You may need to recompile your Pascal programs (delete
old .o files from Pascal) because the Pascal compiler might use _rck_.
I understand `loi 4` more easily than `loi INT32`, because `loi 4`
appears in .e files. So remove INT8, INT16, INT32, INT64.
Add a comment to explain r3 during unconditional jumps.
When storing to a local, stop killing the tokens of other locals,
unless they might overlap with the stored local. This helps some
procedures that juggle locals when the locals aren't in registers.
Also use FRAME_V tokens for locals in statically enclosing procedures.
Rewrite _lxa_ as _lxl_, to skip the `addi ?,?,8` if we can add 8 to
the next constant. The PowerPC code from _lxl_ is now sometimes
better, sometimes worse than before.
The i386 table provided the idea to use %size to find overlapping
locals.
This would become necessary if something failed on a platform with
16-bit int (EM_WSIZE == 2).
Remove unreachable `ret 0`. If reached, it wouldn't work to return
from _m_a_i_n.
Don't output '\0' in "@@FINISHED\0".
Cast code to unsigned int. This helps platforms with 16-bit int, by
doing only the low 16 bits of the bitwise-and. It also removes the
"(warning) conversion of long to pointer loses accuracy".
ncgg has parsed the optional conditional expression (optexpr) of each
splitting coercion since commit 72b83cc in 1985; but for almost 33
years, ncg has ignored the expression in c2_expr.
Few tables had conditional coercions (I only found them in arm and
m68020), and no tables had conditional splitting coercions, so this
only becomes a problem now as I try to add a conditional splitting
coercion to powerpc.
Prefer the rule with REG FREG, by coercing IND_RC_D or IND_RR_D to
FREG. This rule looks better to ncg. When ncg chose between coercion
to REG IND_RC_D or coercion to REG FREG, it chose REG FREG. It only
chose REG IND_RC_D if the stack had exact REG IND_RC_D.
Allow asp 4, exg 4 to shuffle tokens without coercing them into
registers; but comment why dup 4, dup 8 coerce tokens into registers.
Allow dup, dus, exg with larger sizes; and add tests dup_e.e and
exg_e.e to check that dup 20, dus, exg 20 work as well in powerpc as
in i80 and i86.
Then powerpc failed to compile loc 2 loc 4 cuu in dup_e.e. Revise the
integer conversions, so powerpc can compile and pass the test.
When a rule `uses REG ... yields %a`, the result %a is always a
temporary, never a regvar. If the EM code uses _stl_ to put the
result in a regvar, then ncg emits _mr_ to move %a to the regvar.
There are two ways to put the result in the regvar without %a:
1. Yield a token, as in `yields {MUL_RR, %2, %1}`, so that _stl_
can move the token to the regvar without using %a.
2. Provide a pattern, like `sli stl`, that just puts the result
in `{LOCAL, $2}` and not %a.
Allow some tokens, like SUM_RIS and XEQ, onto the stack; and add
tokens like MUL_RR, and patterns like `sli stl`.
Delete patterns for `stl lol` and `sdl ldl` to avoid an extra
temporary %a when the local is a regvar. Delete `lal sti lal loi`
because it would emit wrong code.
Rename token CONST to C. Define set CONST = C + CONST_STACK. The
instructions with CONST operands can now accept CONST_STACK tokens;
some cases of {CONST, %1.val} become %1.
Also simplify two of _rlwinm_ into _slwi_ and _srwi_.
EM instructions _rol_ and _ror_ do rotate an integer left or right.
Our compilers and optimizers never emit _rol_ nor _ror_, but I might
want to use them in the future.
Add _rol_ and _ror_ to powerpc. Fix `rol 4` and `ror 4` in both i80
and i86, where the rules for `rol 4` and `ror 4` seem to have never
been tested until now.
The code used `sphl` to set the stack pointer, but the correct value
was in de, not hl. Fix by swapping the values of de and hl, so `sphl`
is now correct. When we shrink an integer from 4 to 2 bytes, both
registers de and hl point to copies of the result, but only one
register preserves the stack below the result.
This fixes writehex() in tests/plat/lib/test.c, when I compile it with
ack -mcpm, so it preserves the pointer to "0123456789abcdef", so it
writes hexadecimal digits and not garbage.
This bug goes back to commit 157b243 of Mar 18, 1985, so the bug is
32 years old, and probably the oldest bug that I ever fixed.
I compiled tests/plat/lib/test.c with ack -mcpm, but i80 ncg did emit
wrong code in writehex(uint32_t) for
"0123456789abcdef"[code & 0xf]
The code called '.and' to evaluate `code & 0xf`, then tried to call
'.cii' to narrow the result from 4 to 2 bytes, but it passed garbage
instead of 4 to '.cii'. The rule for '.and' was
pat and defined($1)
kills ALL
uses dereg={const2,$1}
gen Call {label,".and"}
This failed to kill register de={const2,4}, so ncg pushed de,
expecting to push 4, but actually pushing garbage.
Fix such rules using `mvi a,...` or `lxi de,...` so ncg doesn't track
the token in the register. This is like the i86 table. A different
fix would use a dummy instruction `killreg a` or `killreg de` like the
m68020 table.
Also correct 1 to $1 when calling '.exg'.
I made a syntax error in some .e file, and em_encode dumped core
because a 64-bit pointer didn't fit in a 32-bit int. Now use stdarg
to pass pointers to error() and fatal().
Stop using the number of errors as the exit status. Many systems use
only the low 8 bits of the exit status, so 256 errors would become 0.
Also change modules/src/print to accept const char *buf
