ack/lang/cem/cemcom.ansi/SmallPars
George Koehler 007a63d529 Begin to add long long to C compiler for linux386.
Add long long type, but without literals; you can't say '123LL' yet.
You can try constant operations, like `(long long)123 + 1`, but the
compiler's `arith` type might not be wide enough.  Conversions,
shifts, and some other operations don't work in i386 ncg; I am using a
union instead of conversions:

	union q {
		long long ll;
		unsigned long long ull;
		int i[2];
	};

Hack plat/linux386/descr to enable long long (size 8, alignment 4)
only for this platform.  The default for other platforms is to disable
long long (size -1).

In lang/cem/cemcom.ansi,

 - BigPars, SmallPars: Add default size, alignment of long long.
 - align.h: Add lnglng_align.
 - arith.c: Convert arithmetic operands to long long or unsigned long
   long when necessary; avoid conversion from long long to long.
   Allow long long as an arithmetic, integral, or logical operand.
 - ch3.c: Handle long long like int and long when erroneously applying
   a selector, like `long long ll; ll.member` or `ll->member`.  Add
   long long to integral and arithmetic types.
 - code.c: Add long long to type stabs for debugging.
 - conversion.c: Add long long to integral conversions.
 - cstoper.c: Write masks up to full_mask[8].  Add FIXME comment.
 - declar.g: Parse `long long` in code.
 - decspecs.c: Understand long long in type declarations.
 - eval.c: Add long long to operations, to generate code like `adi 8`.
   Don't use `ldc` with constant over 4 bytes.
 - ival.g: Allow long long in initializations.
 - main.c: Set lnglng_type and related values.
 - options.c: Add option like `-Vq8.4` to set long long to size 8,
   alignment 4.  I chose 'q', because Perl's pack and Ruby's
   Array#pack use 'q' for 64-bit or long long values; it might be a
   reference to BSD's old quad_t alias for long long.
 - sizes.h: Add lnglng_size.
 - stab.c: Allow long long when writing the type stab for debugging.
   Switch from calculating the ranges to hardcoding them in strings;
   add 8-byte ranges as a special case.  This also hardcodes the
   unsigned 4-byte range as "0;-1".  Before it was either "0;-1" or
   "0;4294967295", depending on sizeof(long) in the compiler.
 - struct.c: Try long long bitfield, but it will probably give the
   error, "bit field type long long does not fit in a word".
 - switch.c: Update comment.
 - tokenname.c: Define LNGLNG (long long) like LNGDBL (long double).
 - type.c, type.str: Add lnglng_type and ulnglng_type.  Add function
   no_long_long() to check if long long is disabled.
2019-09-02 11:24:44 -04:00

141 lines
3.2 KiB
Plaintext

!File: lint.h
/*#define LINT 1 /* if defined, 'lint' is produced */
!File: pathlength.h
#define PATHLENGTH 1024 /* max. length of path to file */
!File: errout.h
#define ERROUT STDERR /* file pointer for writing messages */
#define ERR_SHADOW 5 /* a syntax error overshadows error messages
until ERR_SHADOW symbols have been
accepted without syntax error */
!File: idfsize.h
#define IDFSIZE 64 /* maximum significant length of an identifier */
!File: numsize.h
#define NUMSIZE 256 /* maximum length of a numeric constant */
!File: nparams.h
#define NPARAMS 32 /* maximum number of parameters */
#define STDC_NPARAMS 31 /* ANSI limit on number of parameters */
!File: ifdepth.h
#define IFDEPTH 256 /* maximum number of nested if-constructions */
!File: density.h
#define DENSITY 3 /* see switch.[ch] for an explanation */
!File: macbuf.h
#define LAPBUF 128 /* initial size of macro replacement buffer */
#define ARGBUF 128 /* initial size of macro parameter buffer(s) */
!File: strsize.h
#define ISTRSIZE 32 /* minimum number of bytes allocated for
storing a string */
#define RSTRSIZE 8 /* step size in enlarging the memory for
the storage of a string */
!File: trgt_sizes.h
#define MAXSIZE 8 /* the maximum of the SZ_* constants */
/* target machine sizes */
#define SZ_CHAR 1
#define SZ_SHORT 2
#define SZ_WORD 4
#define SZ_INT 4
#define SZ_LONG 4
#define SZ_LNGLNG -1
#define SZ_FLOAT 4
#define SZ_DOUBLE 8
#define SZ_LNGDBL 8 /* for now */
#define SZ_POINTER 4
/* target machine alignment requirements */
#define AL_CHAR 1
#define AL_SHORT SZ_SHORT
#define AL_WORD SZ_WORD
#define AL_INT SZ_WORD
#define AL_LONG SZ_WORD
#define AL_LNGLNG SZ_WORD
#define AL_FLOAT SZ_WORD
#define AL_DOUBLE SZ_WORD
#define AL_LNGDBL SZ_WORD
#define AL_POINTER SZ_WORD
#define AL_STRUCT 1
#define AL_UNION 1
!File: botch_free.h
/*#define BOTCH_FREE 1 /* when defined, botch freed memory, as a check */
!File: dataflow.h
/*#define DATAFLOW 1 /* produce some compile-time xref */
!File: debug.h
/*#define DEBUG 1 /* perform various self-tests */
#define NDEBUG 1 /* disable assertions */
!File: use_tmp.h
/*#define PREPEND_SCOPES 1 /* collect exa, exp, ina and inp commands
and if USE_TMP is defined let them
precede the rest of the generated
compact code */
/*#define USE_TMP 1 /* use C_insertpart, C_endpart mechanism
to generate EM-code in the order needed
for the code-generators. If not defined,
the old-style peephole optimizer is
needed. */
!File: parbufsize.h
#define PARBUFSIZE 1024
!File: textsize.h
#define ITEXTSIZE 16 /* 1st piece of memory for repl. text */
!File: inputtype.h
/*#define INP_READ_IN_ONE 1 /* read input file in one */
!File: nobitfield.h
/*#define NOBITFIELD 1 /* if NOT defined, implement bitfields */
!File: spec_arith.h
/* describes internal compiler arithmetics */
#undef SPECIAL_ARITHMETICS /* something different from native long */
!File: static.h
#define GSTATIC /* for large global "static" arrays */
!File: nocross.h
/*#define NOCROSS 1 /* if NOT defined, cross compiler */
!File: regcount.h
/*#define REGCOUNT 1 /* count occurrences for register messages */
!File: dbsymtab.h
/*#define DBSYMTAB 1 /* ability to produce symbol table for debugger */