122 lines
4.9 KiB
C
122 lines
4.9 KiB
C
/* This file sets configuration parameters for the MINIX kernel, FS, and MM.
|
|
* It is divided up into two main sections. The first section contains
|
|
* user-settable parameters. In the second section, various internal system
|
|
* parameters are set based on the user-settable parameters.
|
|
*/
|
|
|
|
/*===========================================================================*
|
|
* This section contains user-settable parameters *
|
|
*===========================================================================*/
|
|
|
|
/* MACHINE must be set to one of the machine types list below. */
|
|
#define MACHINE IBM_PC /* Must be one of the names listed below */
|
|
#define IBM_PC 1 /* any 8088 or 80x86-based system */
|
|
#define SUN_4 40 /* any SUN SPARC-based system */
|
|
#define ATARI 60 /* ATARI ST (68000) */
|
|
#define AMIGA 61 /* Commodore Amiga (68000) */
|
|
#define MACINTOSH 62 /* Apple Macintosh (68000) */
|
|
|
|
|
|
/* If ROBUST is set to 1, writes of i-node, directory, and indirect blocks
|
|
* from the cache happen as soon as the blocks are modified. This gives a more
|
|
* robust, but slower, file system. If it is set to 0, these blocks are not
|
|
* given any special treatment, which may cause problems if the system crashes.
|
|
*/
|
|
#define ROBUST 0 /* 0 for speed, 1 for robustness */
|
|
|
|
/* If HAVE_SCATTERED_IO is set to 1, scattered I/O is enabled. */
|
|
/* DEBUG - 1.4b will always use this. */
|
|
#define HAVE_SCATTERED_IO 1
|
|
|
|
|
|
/* The buffer cache should be made as large as you can afford. */
|
|
#if INTEL_32BITS
|
|
#define NR_BUFS 320 /* # blocks in the buffer cache */
|
|
#define NR_BUF_HASH 512 /* size of buf hash table; MUST BE POWER OF 2*/
|
|
#else
|
|
#define NR_BUFS 30 /* # blocks in the buffer cache */
|
|
#define NR_BUF_HASH 32 /* size of buf hash table; MUST BE POWER OF 2*/
|
|
#endif
|
|
|
|
|
|
/* Defines for kernel configuration. */
|
|
#define AUTO_BIOS 0 /* xt_wini.c - use Western's autoconfig BIOS */
|
|
#define C_RS232_INT_HANDLERS 0 /* rs232.c - use slower C int handlers */
|
|
#define DEFAULT_CLASS 0 /* floppy.c - 3 or 5 to get only that size */
|
|
#define LINEWRAP 0 /* console.c - wrap lines at column 80 */
|
|
#define NO_HANDSHAKE 1 /* rs232.c - don't use CTS/RTS handshaking */
|
|
|
|
/* These configuration defines control debugging and unfinished code. */
|
|
#define FLOPPY_TIMING 0 /* floppy.c - for fine tuning floppy driver */
|
|
#define MONITOR 0 /* xt_wini.c - monitor loop in w_wait_int */
|
|
#define RECORD_FLOPPY_SKEW 0 /* floppy.c - for deciding nr_sectors */
|
|
|
|
/* These configuration defines control worthless code. */
|
|
#define SPARE_VIDEO_MEMORY 0 /* misc.c - use memory from any 2nd vid card */
|
|
#define SPLIMITS 0 /* mpx*.x - set stack limits (never checked) */
|
|
|
|
#if (MACHINE == ATARI)
|
|
/* this define says whether the keyboard generates VT100 or IBM_PC escapes */
|
|
#define KEYBOARD VT100 /* either VT100 or IBM_PC */
|
|
#define VT100 100
|
|
/* IBM_PC is already defined above. Use IBM_PC to be Minix ST 1.1 compatible */
|
|
|
|
/* the next define says whether you have SUPRA or ATARI extended partitioning */
|
|
/* hook for future extensions; not yet implemented; not yet used */
|
|
#define PARTITIONING SUPRA /* either SUPRA or ATARI */
|
|
#define SUPRA 1
|
|
/* ATARI is already defined */
|
|
|
|
/* define the number of hard disk drives on your system */
|
|
/* (assuming 2 drives/controller) */
|
|
#define NR_DRIVES 1 /* typically 0 or 1 */
|
|
#endif
|
|
|
|
|
|
/*===========================================================================*
|
|
* There are no user-settable parameters after this line *
|
|
*===========================================================================*/
|
|
/* Set the CHIP type based on the machine selected. The symbol CHIP is actually
|
|
* indicative of more than just the CPU. For example, machines for which
|
|
* CHIP == INTEL are expected to have 8259A interrrupt controllers and the
|
|
* other properties of IBM PC/XT/AT/386 types machines in general. */
|
|
#define INTEL 1 /* CHIP type for PC, XT, AT, 386 and clones */
|
|
#define M68000 2 /* CHIP type for Atari, Amiga, Macintosh */
|
|
#define SPARC 3 /* CHIP type for SUN-4 (e.g. SPARCstation) */
|
|
|
|
#if MACHINE == IBM_PC
|
|
#define CHIP INTEL
|
|
#endif
|
|
|
|
#if (MACHINE == ATARI) | (MACHINE == AMIGA) | (MACHINE == MACINTOSH)
|
|
#define CHIP M68000
|
|
#endif
|
|
|
|
#if (MACHINE == SUN_4)
|
|
#define CHIP SPARC
|
|
#endif
|
|
|
|
#if MACHINE == ATARI
|
|
#define ASKDEV 1 /* ask for boot device */
|
|
#define FASTLOAD 1 /* use multiple block transfers to init ram */
|
|
#endif
|
|
|
|
/* The file buf.h uses MAYBE_WRITE_IMMED. */
|
|
#if ROBUST
|
|
#define MAYBE_WRITE_IMMED WRITE_IMMED /* slower but perhaps safer */
|
|
#else
|
|
#define MAYBE_WRITE_IMMED 0 /* faster */
|
|
#endif
|
|
|
|
#ifndef MACHINE
|
|
#error "In <minix/config.h> please define MACHINE"
|
|
#endif
|
|
|
|
#ifndef CHIP
|
|
#error "In <minix/config.h> please define MACHINE to have a legal value"
|
|
#endif
|
|
|
|
#if (MACHINE == 0)
|
|
#error "MACHINE has incorrect value (0)"
|
|
#endif
|