164 lines
5.5 KiB
Groff
164 lines
5.5 KiB
Groff
.TH Z8000_AS 1
|
|
.ad
|
|
.SH NAME
|
|
z8000_as \- assembler for Zilog z8000 (segmented version)
|
|
.SH SYNOPSIS
|
|
/usr/em/lib/z8000_as [options] argument ...
|
|
.SH DESCRIPTION
|
|
This assembler is made with the general framework
|
|
described in \fIuni_ass\fP(6).
|
|
.SH SYNTAX
|
|
.IP instructions
|
|
Instruction mnemonics are implemented exactly as described in
|
|
`Z8000 PLZ/ASM Assembly Language Programming Manual' and
|
|
`AmZ8001/2 Processor Instruction Set'.
|
|
.IP registers
|
|
The z8000 has sixteen 16-bit general purpose registers specified
|
|
as R0 through R15. All sixteen registers can be used as accumulators.
|
|
In addition to this, fifteen of the sixteen registers may be used
|
|
in addressing mode calculations as either indirect, index or
|
|
base-address registers. Because the instruction format encoding
|
|
uses the value zero to differentiate between various addressing
|
|
modes, register R0 (or the register pair RR0) cannot be used as an
|
|
indirect, index or base-address register.
|
|
It is also possible to address registers as groups of 8, 32 or 64 bits.
|
|
These registers are specified as follows.
|
|
.nf
|
|
.ta 8 16 24 32 40 48
|
|
- RH0, RL0, RH1, RL1, ..., RH7, RL7 for 8-bit regis-
|
|
ters. (`H' stands for high-order byte, and `L' stands
|
|
for low-order byte within a word register). These
|
|
registers overlap 16-bit registers R0 through R7.
|
|
- RR0, RR2, ..., RR14 for 32-bit register pairs.
|
|
- RQ0, RQ4, RQ8 and RQ12 for 64-bit register quadruples.
|
|
.fi
|
|
Besides register pair RR14 is used as stackpointer.
|
|
.IP "addressing modes"
|
|
.nf
|
|
.ta 8 16 24 32 40 48
|
|
syntax meaning (name-mnemonic)
|
|
|
|
$expr the value of expr is the operand.
|
|
(immediate-IM)
|
|
|
|
reg contents of register reg is operand. Any
|
|
register as described above is allowed.
|
|
(register-R)
|
|
|
|
*reg32 contents of register pair reg32 is add-
|
|
ress of operand. Any register pair can
|
|
be used except RR0.
|
|
(indirect register-IR)
|
|
|
|
expr expr is address of operand.
|
|
(direct address-DA)
|
|
|
|
expr(reg16) value of expr + contents of word regis-
|
|
ter reg16 yields address of operand.
|
|
Any word register can be used except R0.
|
|
(indexed address-X)
|
|
|
|
expr expr is address of operand. This mode
|
|
is implied by its instruction. It is
|
|
only used by CALR, DJNZ, JR, LDAR and
|
|
LDR and is the only mode available to
|
|
these instructions. In fact this mode
|
|
differs not from the mode DA.
|
|
(relative address-RA)
|
|
|
|
reg32($expr) contents of register pair reg32 + value
|
|
of expr yields address of operand. Any
|
|
register pair can be used except RR0.
|
|
(based address-BA)
|
|
|
|
reg32(reg16) contents of register pair reg32 + con-
|
|
tents of word register reg16 yields
|
|
address of operand. Any register pair/
|
|
word register can be used except RR0/R0.
|
|
(based indexed address-BX)
|
|
|
|
.fi
|
|
.IP "segmented addresses"
|
|
Segmented addresses require 23 bits, 7 bits for the segment number
|
|
and 16 bits for the offset within a segment.
|
|
So segment 0 contains addresses 0-FFFF, segment 1 contains addresses
|
|
10000-1FFFF, and so on.
|
|
.br
|
|
Assembler syntax of addresses and immediate data is as described above
|
|
(modes IM, DA and X).
|
|
Thus the assembler treats e.g. address 2BC0F as an address in segment 2
|
|
with offset BC0F within the segment.
|
|
There is also an explicit way to express this using the, more unusual,
|
|
syntax <<segment>>offset.
|
|
.br
|
|
There are two internal representations of segmented addresses
|
|
depending on the size of the offset. If the offset fits into 8 bits
|
|
the address is stored in one word (the low-order byte containing
|
|
the offset, bits 8 to 14 containing the segment number and
|
|
bit 15 containing a zero) otherwise the address is stored in two
|
|
words (the lower word containing the offset, the upper word as
|
|
before but bit 15 containing 1 indicating that the offset is in
|
|
the next word).
|
|
This is important for instructions which has an operand of mode DA
|
|
or X.
|
|
.IP "extended branches"
|
|
When the target address in a relative jump/call (JR/CALR)
|
|
does not fit into the instruction format, the assembler generates
|
|
a corresponding `normal' jump/call (JP/CALL).
|
|
.SH EXAMPLE
|
|
An example of z8000 assembly code.
|
|
.nf
|
|
.ta 8 16 24 32 40 48
|
|
|
|
! This z8000 assembly routine converts a positive number
|
|
!(in R1) to a string representing the number and puts this
|
|
!string into a buffer (R3 contains the starting address of
|
|
!this buffer. The base is in R4 determining %x, %d or %o.
|
|
|
|
convert:
|
|
exts RR0 !sign-extend R1
|
|
div RR0, R4 !divide by the base
|
|
test R1 !R1 contains the quotient
|
|
jr EQ, 5f
|
|
!if quotient is 0 convert is ready
|
|
!else push remainder onto the stack
|
|
push *RR14, R0
|
|
calr convert !and again...
|
|
pop R0, *RR14
|
|
5: add R0, $060 !add `0'
|
|
cp R0, $071 !compare to `9'
|
|
jr LE, 8f
|
|
add R0, $7 !in case of %x `A'-`F'
|
|
8: ldb 0(R3), RL0 !put character into buffer
|
|
inc R3
|
|
ret
|
|
|
|
.fi
|
|
.SH "SEE ALSO"
|
|
uni_ass(6).
|
|
.br
|
|
ack(1).
|
|
.br
|
|
Z8000 PLZ/ASM Assembly Language Programming Manual, april 1979.
|
|
.br
|
|
AmZ8001/2 Processor Instruction Set, 1979.
|
|
.SH BUGS
|
|
You cannot use (reg16) instead of 0(reg16).
|
|
.br
|
|
Condition codes `Z' (meaning zero), `C' (meaning carry) and <nothing>
|
|
(meaning always false) are not implemented.
|
|
The first two because they also represent flags and the third one
|
|
because it's useless.
|
|
So for `Z'/`C' use `EQ'/`ULT'.
|
|
.br
|
|
The z8000 assembly instruction set as described in the book
|
|
`AmZ8001/2 Processor Instruction Set' differs from the one
|
|
described in the manual `Z8000 PLZ/ASM Assembly Language Programming
|
|
Manual' in that the book includes CLRL, LDL (format F5.1) and
|
|
PUSHL (format F5.1) which all in fact do not (!) work.
|
|
.br
|
|
On the other side the book excludes SIN, SIND, SINDR, SINI, SINIR,
|
|
SOUT, SOUTD, SOTDR, SOUTI and SOTIR.
|
|
Whether these instructions do work as described in the manual has not
|
|
been tested yet.
|