#include "tcc.h"
#define HAVE_SECTION_RELOC
void relocate_init(Section *sr) {}
void relocate(TCCState *s1, ElfW_Rel *rel, int type, char *ptr, addr_t addr, addr_t val)
{
ElfW(Sym) *sym;
int sym_index;
sym_index = ELFW(R_SYM)(rel->r_info);
sym = &((ElfW(Sym) *)symtab_section->data)[sym_index];
switch(type) {
case R_ARM_PC24:
case R_ARM_CALL:
case R_ARM_JUMP24:
case R_ARM_PLT32:
{
int x, is_thumb, is_call, h, blx_avail, is_bl, th_ko;
x = (*(int *) ptr) & 0xffffff;
if (sym->st_shndx == SHN_UNDEF ||
s1->output_type == TCC_OUTPUT_MEMORY)
val = s1->plt->sh_addr;
#ifdef DEBUG_RELOC
printf ("reloc %d: x=0x%x val=0x%x ", type, x, val);
#endif
(*(int *)ptr) &= 0xff000000;
if (x & 0x800000)
x -= 0x1000000;
x <<= 2;
blx_avail = (TCC_ARM_VERSION >= 5);
is_thumb = val & 1;
is_bl = (*(unsigned *) ptr) >> 24 == 0xeb;
is_call = (type == R_ARM_CALL || (type == R_ARM_PC24 && is_bl));
x += val - addr;
#ifdef DEBUG_RELOC
printf (" newx=0x%x name=%s\n", x,
(char *) symtab_section->link->data + sym->st_name);
#endif
h = x & 2;
th_ko = (x & 3) && (!blx_avail || !is_call);
if (th_ko || x >= 0x2000000 || x < -0x2000000)
tcc_error("can't relocate value at %x,%d",addr, type);
x >>= 2;
x &= 0xffffff;
/* Only reached if blx is avail and it is a call */
if (is_thumb) {
x |= h << 24;
(*(int *)ptr) = 0xfa << 24; /* bl -> blx */
}
(*(int *) ptr) |= x;
}
return;
/* Since these relocations only concern Thumb-2 and blx instruction was
introduced before Thumb-2, we can assume blx is available and not
guard its use */
case R_ARM_THM_PC22:
case R_ARM_THM_JUMP24:
{
int x, hi, lo, s, j1, j2, i1, i2, imm10, imm11;
int to_thumb, is_call, to_plt, blx_bit = 1 << 12;
Section *plt;
/* weak reference */
if (sym->st_shndx == SHN_UNDEF &&
ELFW(ST_BIND)(sym->st_info) == STB_WEAK)
return;
/* Get initial offset */
hi = (*(uint16_t *)ptr);
lo = (*(uint16_t *)(ptr+2));
s = (hi >> 10) & 1;
j1 = (lo >> 13) & 1;
j2 = (lo >> 11) & 1;
i1 = (j1 ^ s) ^ 1;
i2 = (j2 ^ s) ^ 1;
imm10 = hi & 0x3ff;
imm11 = lo & 0x7ff;
x = (s << 24) | (i1 << 23) | (i2 << 22) |
(imm10 << 12) | (imm11 << 1);
if (x & 0x01000000)
x -= 0x02000000;
/* Relocation infos */
to_thumb = val & 1;
plt = s1->plt;
to_plt = (val >= plt->sh_addr) &&
(val < plt->sh_addr + plt->data_offset);
is_call = (type == R_ARM_THM_PC22);
/* Compute final offset */
if (to_plt && !is_call) /* Point to 1st instr of Thumb stub */
x -= 4;
x += val - addr;
if (!to_thumb && is_call) {
blx_bit = 0; /* bl -> blx */
x = (x + 3) & -4; /* Compute offset from aligned PC */
}
/* Check that relocation is possible
* offset must not be out of range
* if target is to be entered in arm mode:
- bit 1 must not set
- instruction must be a call (bl) or a jump to PLT */
if (!to_thumb || x >= 0x1000000 || x < -0x1000000)
if (to_thumb || (val & 2) || (!is_call && !to_plt))
tcc_error("can't relocate value at %x,%d",addr, type);
/* Compute and store final offset */
s = (x >> 24) & 1;
i1 = (x >> 23) & 1;
i2 = (x >> 22) & 1;
j1 = s ^ (i1 ^ 1);
j2 = s ^ (i2 ^ 1);
imm10 = (x >> 12) & 0x3ff;
imm11 = (x >> 1) & 0x7ff;
(*(uint16_t *)ptr) = (uint16_t) ((hi & 0xf800) |
(s << 10) | imm10);
(*(uint16_t *)(ptr+2)) = (uint16_t) ((lo & 0xc000) |
(j1 << 13) | blx_bit | (j2 << 11) |
imm11);
}
return;
case R_ARM_MOVT_ABS:
case R_ARM_MOVW_ABS_NC:
{
int x, imm4, imm12;
if (type == R_ARM_MOVT_ABS)
val >>= 16;
imm12 = val & 0xfff;
imm4 = (val >> 12) & 0xf;
x = (imm4 << 16) | imm12;
if (type == R_ARM_THM_MOVT_ABS)
*(int *)ptr |= x;
else
*(int *)ptr += x;
}
return;
case R_ARM_THM_MOVT_ABS:
case R_ARM_THM_MOVW_ABS_NC:
{
int x, i, imm4, imm3, imm8;
if (type == R_ARM_THM_MOVT_ABS)
val >>= 16;
imm8 = val & 0xff;
imm3 = (val >> 8) & 0x7;
i = (val >> 11) & 1;
imm4 = (val >> 12) & 0xf;
x = (imm3 << 28) | (imm8 << 16) | (i << 10) | imm4;
if (type == R_ARM_THM_MOVT_ABS)
*(int *)ptr |= x;
else
*(int *)ptr += x;
}
return;
case R_ARM_PREL31:
{
int x;
x = (*(int *)ptr) & 0x7fffffff;
(*(int *)ptr) &= 0x80000000;
x = (x * 2) / 2;
x += val - addr;
if((x^(x>>1))&0x40000000)
tcc_error("can't relocate value at %x,%d",addr, type);
(*(int *)ptr) |= x & 0x7fffffff;
}
case R_ARM_ABS32:
*(int *)ptr += val;
return;
case R_ARM_REL32:
*(int *)ptr += val - addr;
return;
case R_ARM_GOTPC:
*(int *)ptr += s1->got->sh_addr - addr;
return;
case R_ARM_GOTOFF:
*(int *)ptr += val - s1->got->sh_addr;
return;
case R_ARM_GOT32:
/* we load the got offset */
*(int *)ptr += s1->sym_attrs[sym_index].got_offset;
return;
case R_ARM_COPY:
return;
case R_ARM_V4BX:
/* trade Thumb support for ARMv4 support */
if ((0x0ffffff0 & *(int*)ptr) == 0x012FFF10)
*(int*)ptr ^= 0xE12FFF10 ^ 0xE1A0F000; /* BX Rm -> MOV PC, Rm */
return;
case R_ARM_GLOB_DAT:
case R_ARM_JUMP_SLOT:
*(addr_t *)ptr = val;
return;
case R_ARM_NONE:
/* Nothing to do. Normally used to indicate a dependency
on a certain symbol (like for exception handling under EABI). */
return;
default:
fprintf(stderr,"FIXME: handle reloc type %x at %x [%p] to %x\n",
type, (unsigned)addr, ptr, (unsigned)val);
return;
}
}