xv6-65oo2/kernel/proc.h

108 lines
3.4 KiB
C
Raw Permalink Normal View History

2019-05-31 13:45:59 +00:00
// Saved registers for kernel context switches.
struct context {
uint64 ra;
uint64 sp;
// callee-saved
uint64 s0;
uint64 s1;
uint64 s2;
uint64 s3;
uint64 s4;
uint64 s5;
uint64 s6;
uint64 s7;
uint64 s8;
uint64 s9;
uint64 s10;
uint64 s11;
};
2019-07-10 12:57:51 +00:00
// Per-CPU state.
struct cpu {
2019-07-10 12:57:51 +00:00
struct proc *proc; // The process running on this cpu, or null.
struct context context; // swtch() here to enter scheduler().
2019-07-10 12:57:51 +00:00
int noff; // Depth of push_off() nesting.
int intena; // Were interrupts enabled before push_off()?
};
extern struct cpu cpus[NCPU];
2019-07-10 12:57:51 +00:00
// per-process data for the trap handling code in trampoline.S.
2019-05-31 13:45:59 +00:00
// sits in a page by itself just under the trampoline page in the
// user page table. not specially mapped in the kernel page table.
2019-07-26 08:53:46 +00:00
// uservec in trampoline.S saves user registers in the trapframe,
2019-07-10 12:57:51 +00:00
// then initializes registers from the trapframe's
// kernel_sp, kernel_hartid, kernel_satp, and jumps to kernel_trap.
2019-07-26 08:53:46 +00:00
// usertrapret() and userret in trampoline.S set up
2019-07-10 12:57:51 +00:00
// the trapframe's kernel_*, restore user registers from the
// trapframe, switch to the user page table, and enter user space.
// the trapframe includes callee-saved user registers like s0-s11 because the
// return-to-user path via usertrapret() doesn't return through
// the entire kernel call stack.
2019-05-31 13:45:59 +00:00
struct trapframe {
2019-07-10 12:57:51 +00:00
/* 0 */ uint64 kernel_satp; // kernel page table
/* 8 */ uint64 kernel_sp; // top of process's kernel stack
/* 16 */ uint64 kernel_trap; // usertrap()
/* 24 */ uint64 epc; // saved user program counter
/* 32 */ uint64 kernel_hartid; // saved kernel tp
/* 40 */ uint64 ra;
/* 48 */ uint64 sp;
/* 56 */ uint64 gp;
/* 64 */ uint64 tp;
/* 72 */ uint64 t0;
/* 80 */ uint64 t1;
/* 88 */ uint64 t2;
/* 96 */ uint64 s0;
/* 104 */ uint64 s1;
/* 112 */ uint64 a0;
/* 120 */ uint64 a1;
/* 128 */ uint64 a2;
/* 136 */ uint64 a3;
/* 144 */ uint64 a4;
/* 152 */ uint64 a5;
/* 160 */ uint64 a6;
/* 168 */ uint64 a7;
/* 176 */ uint64 s2;
/* 184 */ uint64 s3;
/* 192 */ uint64 s4;
/* 200 */ uint64 s5;
/* 208 */ uint64 s6;
/* 216 */ uint64 s7;
/* 224 */ uint64 s8;
/* 232 */ uint64 s9;
/* 240 */ uint64 s10;
/* 248 */ uint64 s11;
/* 256 */ uint64 t3;
/* 264 */ uint64 t4;
/* 272 */ uint64 t5;
/* 280 */ uint64 t6;
2006-07-11 01:07:40 +00:00
};
2020-11-03 20:02:08 +00:00
enum procstate { UNUSED, USED, SLEEPING, RUNNABLE, RUNNING, ZOMBIE };
2006-09-07 14:12:30 +00:00
// Per-process state
struct proc {
struct spinlock lock;
// p->lock must be held when using these:
enum procstate state; // Process state
void *chan; // If non-zero, sleeping on chan
int killed; // If non-zero, have been killed
int xstate; // Exit status to be returned to parent's wait
int pid; // Process ID
2020-11-08 06:56:57 +00:00
// wait_lock must be held when using this:
2020-11-05 12:32:10 +00:00
struct proc *parent; // Parent process
// these are private to the process, so p->lock need not be held.
2019-10-03 19:02:19 +00:00
uint64 kstack; // Virtual address of kernel stack
Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times. The x86-64 doesn't just add two levels to page tables to support 64 bit addresses, but is a different processor. For example, calling conventions, system calls, and segmentation are different from 32-bit x86. Segmentation is basically gone, but gs/fs in combination with MSRs can be used to hold a per-core pointer. In general, x86-64 is more straightforward than 32-bit x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch. A summary of the changes is as follows: - Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu), because xv6's boot loader doesn't understand 64bit ELF files. And, we don't care anymore about booting. - Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img, bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than MAXFILE! - Update gdb.tmpl to be for i386 or x86-64 - Console/printf: use stdarg.h and treat 64-bit addresses different from ints (32-bit) - Update elfhdr to be 64 bit - entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page table in 32-bit mode before switching to 64-bit mode, share code for entering boot processor and APs, and tweak boot gdt. The boot gdt is the gdt that the kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state mostly disappear.) - exec.c: fix passing argv (64-bit now instead of 32-bit). - initcode.c: use syscall instead of int. - kernel.ld: load kernel very high, in top terabyte. 64 bits is a lot of address space! - proc.c: initial return is through new syscall path instead of trapret. - proc.h: update struct cpu to have some scratch space since syscall saves less state than int, update struct context to reflect x86-64 calling conventions. - swtch: simplify for x86-64 calling conventions. - syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are passed through registers), and fetchaddr to read a 64-bit value from user space. - sysfile: update to handle pointers from user space (e.g., sys_exec), which are 64 bits. - trap.c: no special trap vector for sys calls, because x86-64 has a different plan for system calls. - trapasm: one plan for syscalls and one plan for traps (interrupt and exceptions). On x86-64, the kernel is responsible for switching user/kernel stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR GS_KERN_BASE to point to the core's cpu structure (using swapgs). - types.h: add uint64, and change pde_t to uint64 - usertests: exit() when fork fails, which helped in tracking down one of the bugs in the switch from 32-bit to 64-bit - vectors: update to make them 64 bits - vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task segment to set kernel stack for interrupts (but simpler than in 32-bit mode), add an extra argument to freevm (size of user part of address space) to avoid checking all entries till KERNBASE (there are MANY TB before the top 1TB). - x86: update trapframe to have 64-bit entries, which is what the processor pushes on syscalls and traps. simplify lgdt and lidt, using struct desctr, which needs the gcc directives packed and aligned. TODO: - use int32 instead of int? - simplify curproc(). xv6 has per-cpu state again, but this time it must have it. - avoid repetition in walkpgdir - fix validateint() in usertests.c - fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
2018-09-23 12:24:42 +00:00
uint64 sz; // Size of process memory (bytes)
pagetable_t pagetable; // User page table
struct trapframe *trapframe; // data page for trampoline.S
2019-05-31 13:45:59 +00:00
struct context context; // swtch() here to run process
2006-09-07 14:12:30 +00:00
struct file *ofile[NOFILE]; // Open files
2008-10-15 05:15:32 +00:00
struct inode *cwd; // Current directory
char name[16]; // Process name (debugging)
2006-06-12 15:22:12 +00:00
};