xv6-65oo2/bootasm.S

89 lines
2.9 KiB
ArmAsm
Raw Normal View History

#include "asm.h"
#include "memlayout.h"
#include "mmu.h"
2006-09-06 17:27:19 +00:00
# Start the first CPU: switch to 32-bit protected mode, jump into C.
# The BIOS loads this code from the first sector of the hard disk into
# memory at physical address 0x7c00 and starts executing in real mode
# with %cs=0 %ip=7c00.
2006-09-06 17:27:19 +00:00
.code16 # Assemble for 16-bit mode
.globl start
start:
cli # BIOS enabled interrupts; disable
2006-06-12 15:22:12 +00:00
# Set up the important data segment registers (DS, ES, SS).
xorw %ax,%ax # Segment number zero
movw %ax,%ds # -> Data Segment
movw %ax,%es # -> Extra Segment
movw %ax,%ss # -> Stack Segment
2006-06-12 15:22:12 +00:00
# Physical address line A20 is tied to zero so that the first PCs
# with 2 MB would run software that assumed 1 MB. Undo that.
seta20.1:
inb $0x64,%al # Wait for not busy
testb $0x2,%al
jnz seta20.1
movb $0xd1,%al # 0xd1 -> port 0x64
outb %al,$0x64
2006-06-12 15:22:12 +00:00
seta20.2:
inb $0x64,%al # Wait for not busy
testb $0x2,%al
jnz seta20.2
movb $0xdf,%al # 0xdf -> port 0x60
outb %al,$0x60
# Switch from real to protected mode. Use a bootstrap GDT that makes
# virtual addresses map dierctly to physical addresses so that the
# effective memory map doesn't change during the transition.
lgdt gdtdesc
movl %cr0, %eax
orl $CR0_PE, %eax
movl %eax, %cr0
2006-09-06 17:27:19 +00:00
//PAGEBREAK!
# Complete transition to 32-bit protected mode by using long jmp
2011-08-26 10:47:13 +00:00
# to reload %cs and %eip. The segment descriptors are set up with no
# translation, so that the mapping is still the identity mapping.
ljmp $(SEG_KCODE<<3), $start32
.code32 # Tell assembler to generate 32-bit code now.
start32:
# Set up the protected-mode data segment registers
2009-05-31 01:00:38 +00:00
movw $(SEG_KDATA<<3), %ax # Our data segment selector
movw %ax, %ds # -> DS: Data Segment
movw %ax, %es # -> ES: Extra Segment
2009-05-31 01:00:38 +00:00
movw %ax, %ss # -> SS: Stack Segment
2009-05-31 01:12:08 +00:00
movw $0, %ax # Zero segments not ready for use
movw %ax, %fs # -> FS
movw %ax, %gs # -> GS
2009-05-31 01:00:38 +00:00
# Set up the stack pointer and call into C.
movl $start, %esp
2007-08-28 19:25:04 +00:00
call bootmain
# If bootmain returns (it shouldn't), trigger a Bochs
# breakpoint if running under Bochs, then loop.
movw $0x8a00, %ax # 0x8a00 -> port 0x8a00
movw %ax, %dx
outw %ax, %dx
2009-12-01 19:07:12 +00:00
movw $0x8ae0, %ax # 0x8ae0 -> port 0x8a00
outw %ax, %dx
spin:
2007-08-28 19:25:04 +00:00
jmp spin
# Bootstrap GDT
.p2align 2 # force 4 byte alignment
2006-06-12 15:22:12 +00:00
gdt:
SEG_NULLASM # null seg
SEG_ASM(STA_X|STA_R, 0x0, 0xffffffff) # code seg
SEG_ASM(STA_W, 0x0, 0xffffffff) # data seg
2006-06-12 15:22:12 +00:00
gdtdesc:
.word (gdtdesc - gdt - 1) # sizeof(gdt) - 1
.long gdt # address gdt