complain if no disk 1

lots of cleanup
This commit is contained in:
rtm 2006-08-30 18:55:06 +00:00
parent 18432ed5ed
commit 2aa4c3bc29
10 changed files with 35 additions and 122 deletions

1
Notes
View file

@ -120,3 +120,4 @@ echo foo > bar should truncate bar
make it work on one cpu
make it work on a real machine
release before acquire at end of sleep?
check 2nd disk (i.e. if not in .bochsrc)

3
bio.c
View file

@ -75,9 +75,8 @@ bread(uint dev, uint sector)
extern struct spinlock ide_lock;
b = getblk(dev, sector);
if(b->flags & B_VALID){
if(b->flags & B_VALID)
return b;
}
acquire(&ide_lock);
c = ide_start_rw(dev & 0xff, sector, b->data, 1, 1);

1
defs.h
View file

@ -116,6 +116,7 @@ void iinit(void);
struct inode * iget(uint dev, uint inum);
void ilock(struct inode *ip);
void iunlock(struct inode *ip);
void itrunc(struct inode *ip);
void idecref(struct inode *ip);
void iincref(struct inode *ip);
void iput(struct inode *ip);

44
fs.c
View file

@ -24,6 +24,9 @@ iinit(void)
initlock(&inode_table_lock, "inode_table");
}
/*
* allocate a disk block
*/
static uint
balloc(uint dev)
{
@ -52,7 +55,7 @@ balloc(uint dev)
}
}
if (b >= size)
panic("balloc: out of blocks\n");
panic("balloc: out of blocks");
bp->data[bi/8] |= 0x1 << (bi % 8);
bwrite (bp, BBLOCK(b, ninodes)); // mark it allocated on disk
@ -87,7 +90,11 @@ bfree(int dev, uint b)
brelse(bp);
}
// returns an inode with busy set and incremented reference count.
/*
* fetch an inode, from the in-core table if it's already
* in use, otherwise read from the disk.
* returns an inode with busy set and incremented reference count.
*/
struct inode *
iget(uint dev, uint inum)
{
@ -180,8 +187,9 @@ ialloc(uint dev, short type)
}
if (inum >= ninodes)
panic ("ialloc: no inodes left\n");
panic ("ialloc: no inodes left");
memset(dip, 0, sizeof(*dip));
dip->type = type;
bwrite (bp, IBLOCK(inum)); // mark it allocated on the disk
brelse(bp);
@ -254,12 +262,11 @@ bmap(struct inode *ip, uint bn)
}
void
iunlink(struct inode *ip)
itrunc(struct inode *ip)
{
int i, j;
struct buf *inbp;
// free inode, its blocks, and remove dir entry
for (i = 0; i < NADDRS; i++) {
if (ip->addrs[i] != 0) {
if (i == INDIRECT) {
@ -278,10 +285,7 @@ iunlink(struct inode *ip)
}
}
ip->size = 0;
ip->major = 0;
ip->minor = 0;
iupdate(ip);
ifree(ip); // is this the right order?
}
// caller is releasing a reference to this inode.
@ -292,8 +296,10 @@ iput(struct inode *ip)
if(ip->count < 1 || ip->busy != 1)
panic("iput");
if ((ip->count == 1) && (ip->nlink == 0))
iunlink(ip);
if ((ip->count == 1) && (ip->nlink == 0)) {
itrunc(ip);
ifree(ip);
}
acquire(&inode_table_lock);
@ -425,7 +431,7 @@ writei(struct inode *ip, char *addr, uint off, uint n)
}
return r;
} else {
panic ("writei: unknown type\n");
panic ("writei: unknown type");
return 0;
}
}
@ -451,10 +457,6 @@ namei(char *path, int mode, uint *ret_off, char **ret_last, struct inode **ret_i
int i, atend;
unsigned ninum;
if(mode == NAMEI_DELETE && ret_off == 0)
panic("namei no ret_off");
if(mode == NAMEI_CREATE && ret_last == 0)
panic("namei no ret_last");
if(ret_off)
*ret_off = 0xffffffff;
if(ret_last)
@ -550,9 +552,6 @@ wdir(struct inode *dp, char *name, uint ino)
struct dirent de;
int i;
if(name[0] == '\0')
panic("wdir no name");
for(off = 0; off < dp->size; off += sizeof(de)){
if(readi(dp, (char *) &de, off, sizeof(de)) != sizeof(de))
panic("wdir read");
@ -561,11 +560,8 @@ wdir(struct inode *dp, char *name, uint ino)
}
de.inum = ino;
for(i = 0; i < DIRSIZ && name[i]; i++){
if(name[i] == '/')
panic("wdir /");
for(i = 0; i < DIRSIZ && name[i]; i++)
de.name[i] = name[i];
}
for( ; i < DIRSIZ; i++)
de.name[i] = '\0';
@ -595,10 +591,8 @@ mknod1(struct inode *dp, char *name, short type, short major, short minor)
struct inode *ip;
ip = ialloc(dp->dev, type);
if (ip == 0) {
iput(dp);
if (ip == 0)
return 0;
}
ip->major = major;
ip->minor = minor;
ip->size = 0;

28
ide.c
View file

@ -1,7 +1,5 @@
/*
* Minimal PIO-based (non-interrupt-driven) IDE driver code.
* For information about what all this IDE/ATA magic means,
* see the materials available on the class references page.
* Simple PIO-based (non-DMA) IDE driver code.
*/
#include "types.h"
@ -27,9 +25,11 @@ struct ide_request {
struct ide_request request[NREQUEST];
int head, tail;
struct spinlock ide_lock;
int disk_1_present;
int disk_channel;
int ide_probe_disk1(void);
static int
ide_wait_ready(int check_error)
{
@ -47,11 +47,9 @@ void
ide_init(void)
{
initlock(&ide_lock, "ide");
if (ncpu < 2) {
panic ("ide_init: disk interrupt is going to the second cpu\n");
}
ioapic_enable (IRQ_IDE, 1);
ioapic_enable (IRQ_IDE, ncpu - 1);
ide_wait_ready(0);
disk_1_present = ide_probe_disk1();
}
void
@ -80,7 +78,6 @@ ide_probe_disk1(void)
// switch back to Device 0
outb(0x1F6, 0xE0 | (0<<4));
cprintf("Device 1 presence: %d\n", (x < 1000));
return (x < 1000);
}
@ -111,11 +108,8 @@ ide_start_rw(int diskno, uint secno, void *addr, uint nsecs, int read)
{
struct ide_request *r;
if(!holding(&ide_lock))
panic("ide_start_read: not holding ide_lock");
if(nsecs > 1)
panic("ide_start_read: nsecs too large");
if(diskno && !disk_1_present)
panic("ide disk 1 not present");
while ((head + 1) % NREQUEST == tail)
sleep (&disk_channel, &ide_lock);
@ -140,12 +134,6 @@ ide_finish(void *c)
int r;
struct ide_request *req = (struct ide_request *) c;
if(c != &request[tail])
panic("ide_finish_read");
if(!holding(&ide_lock))
panic("ide_start_read: not holding ide_lock");
if (req->read) {
if ((r = ide_wait_ready(1)) >= 0)
insl(0x1F0, req->addr, 512/4);

View file

@ -23,8 +23,6 @@ struct run {
};
struct run *freelist;
void ktest(void);
/*
* initialize free list of physical pages. this code
* cheats by just considering the one megabyte of pages
@ -43,7 +41,6 @@ kinit(void)
mem = 256; // XXX
cprintf("mem = %d\n", mem * PAGE);
kfree(start, mem * PAGE);
ktest();
}
void
@ -130,46 +127,6 @@ kalloc(int n)
rr = &(*rr)->next;
}
release(&kalloc_lock);
cprintf("kalloc: out of memory\n");
return 0;
}
void
ktest(void)
{
char *p1, *p2, *p3;
// test coalescing
p1 = kalloc(4 * PAGE);
kfree(p1 + 3*PAGE, PAGE);
kfree(p1 + 2*PAGE, PAGE);
kfree(p1, PAGE);
kfree(p1 + PAGE, PAGE);
p2 = kalloc(4 * PAGE);
if(p2 != p1)
panic("ktest");
kfree(p2, 4 * PAGE);
// test finding first run that fits
p1 = kalloc(1 * PAGE);
p2 = kalloc(1 * PAGE);
kfree(p1, PAGE);
p3 = kalloc(2 * PAGE);
kfree(p2, PAGE);
kfree(p3, 2 * PAGE);
// test running out of memory
p1 = 0;
while((p2 = kalloc(PAGE)) != 0){
*(char**)p2 = p1;
p1 = p2;
}
while(p1){
p2 = *(char **)p1;
kfree(p1, PAGE);
p1 = p2;
}
p1 = kalloc(PAGE * 20);
if(p1 == 0)
panic("ktest2");
kfree(p1, PAGE * 20);
}

2
proc.c
View file

@ -113,7 +113,7 @@ copyproc(struct proc* p)
// Copy trapframe registers from parent.
np->tf = (struct trapframe*)(np->kstack + KSTACKSIZE) - 1;
*np->tf = *p->tf;
memmove(np->tf, p->tf, sizeof(*np->tf));
// Clear %eax so that fork system call returns 0 in child.
np->tf->eax = 0;

View file

@ -57,21 +57,3 @@ strncmp(const char *p, const char *q, uint n)
else
return (int) ((uchar) *p - (uchar) *q);
}
// Memcpy is deprecated and should NOT be called.
// Use memmove instead, which has defined semantics
// when the two memory ranges overlap.
// Memcpy is here only because gcc compiles some
// structure assignments into calls to memcpy.
void *
memcpy(void *dst, void *src, uint n)
{
char *d = (char *) dst;
char *s = (char *) src;
while(n-- > 0)
*d++ = *s++;
return dst;
}

View file

@ -21,8 +21,6 @@
* Arguments on the stack, from the user call to the C
* library system call function. The saved user %esp points
* to a saved program counter, and then the first argument.
*
* Return value? Error indication? Errno?
*/
/*
@ -51,7 +49,6 @@ fetchbyte(struct proc *p, uint addr, char* c)
return 0;
}
// This arg is void* so that both int* and uint* can be passed.
int
fetcharg(int argno, void *ip)
{
@ -366,9 +363,6 @@ sys_chdir(void)
if((l = checkstring(arg0)) < 0)
return -1;
if(l >= DIRSIZ)
return -1;
if ((ip = namei(cp->mem + arg0, NAMEI_LOOKUP, 0, 0, 0)) == 0)
return -1;
@ -436,11 +430,8 @@ sys_dup(void)
return -1;
if(cp->fds[fd] == 0)
return -1;
if (cp->fds[fd]->type != FD_PIPE && cp->fds[fd]->type != FD_FILE)
if ((ufd1 = fd_ualloc()) < 0)
return -1;
if ((ufd1 = fd_ualloc()) < 0) {
return -1;
}
cp->fds[ufd1] = cp->fds[fd];
fd_incref(cp->fds[ufd1]);
return ufd1;

View file

@ -2,8 +2,8 @@
# Generate vectors.S, the trap/interrupt entry points.
# There has to be one entry point per interrupt number
# since otherwise there's no way to tell the interrupt
# number.
# since otherwise there's no way for trap() to discover
# the interrupt number.
print "/* generated by vectors.pl */\n";
print "/* handlers */\n";