ilo-pona/xv6-65oo2
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Activity

Checkpoint port of xv6 to x86-64. Passed usertests on 2 processors a few times.

Browse source 
The x86-64 doesn't just add two levels to page tables to support 64 bit
addresses, but is a different processor. For example, calling conventions,
system calls, and segmentation are different from 32-bit x86. Segmentation is
basically gone, but gs/fs in combination with MSRs can be used to hold a
per-core pointer. In general, x86-64 is more straightforward than 32-bit
x86. The port uses code from sv6 and the xv6 "rsc-amd64" branch.

A summary of the changes is as follows:

- Booting: switch to grub instead of xv6's bootloader (pass -kernel to qemu),
because xv6's boot loader doesn't understand 64bit ELF files.  And, we don't
care anymore about booting.

- Makefile: use -m64 instead of -m32 flag for gcc, delete boot loader, xv6.img,
bochs, and memfs. For now dont' use -O2, since usertests with -O2 is bigger than
MAXFILE!

- Update gdb.tmpl to be for i386 or x86-64

- Console/printf: use stdarg.h and treat 64-bit addresses different from ints
  (32-bit)

- Update elfhdr to be 64 bit

- entry.S/entryother.S: add code to switch to 64-bit mode: build a simple page
table in 32-bit mode before switching to 64-bit mode, share code for entering
boot processor and APs, and tweak boot gdt.  The boot gdt is the gdt that the
kernel proper also uses. (In 64-bit mode, the gdt/segmentation and task state
mostly disappear.)

- exec.c: fix passing argv (64-bit now instead of 32-bit).

- initcode.c: use syscall instead of int.

- kernel.ld: load kernel very high, in top terabyte.  64 bits is a lot of
address space!

- proc.c: initial return is through new syscall path instead of trapret.

- proc.h: update struct cpu to have some scratch space since syscall saves less
state than int, update struct context to reflect x86-64 calling conventions.

- swtch: simplify for x86-64 calling conventions.

- syscall: add fetcharg to handle x86-64 calling convetions (6 arguments are
passed through registers), and fetchaddr to read a 64-bit value from user space.

- sysfile: update to handle pointers from user space (e.g., sys_exec), which are
64 bits.

- trap.c: no special trap vector for sys calls, because x86-64 has a different
plan for system calls.

- trapasm: one plan for syscalls and one plan for traps (interrupt and
exceptions). On x86-64, the kernel is responsible for switching user/kernel
stacks. To do, xv6 keeps some scratch space in the cpu structure, and uses MSR
GS_KERN_BASE to point to the core's cpu structure (using swapgs).

- types.h: add uint64, and change pde_t to uint64

- usertests: exit() when fork fails, which helped in tracking down one of the
bugs in the switch from 32-bit to 64-bit

- vectors: update to make them 64 bits

- vm.c: use bootgdt in kernel too, program MSRs for syscalls and core-local
state (for swapgs), walk 4 levels in walkpgdir, add DEVSPACETOP, use task
segment to set kernel stack for interrupts (but simpler than in 32-bit mode),
add an extra argument to freevm (size of user part of address space) to avoid
checking all entries till KERNBASE (there are MANY TB before the top 1TB).

- x86: update trapframe to have 64-bit entries, which is what the processor
pushes on syscalls and traps.  simplify lgdt and lidt, using struct desctr,
which needs the gcc directives packed and aligned.

TODO:
- use int32 instead of int?
- simplify curproc(). xv6 has per-cpu state again, but this time it must have it.
- avoid repetition in walkpgdir
- fix validateint() in usertests.c
- fix bugs (e.g., observed one a case of entering kernel with invalid gs or proc
This commit is contained in:
Frans Kaashoek 2018-09-23 08:24:42 -04:00
parent b818915f79
commit ab0db651af
39 changed files with 1039 additions and 762 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
.gdbinit.tmpl
View file

@ -1,27 +0,0 @@
set $lastcs = -1
define hook-stop
# There doesn't seem to be a good way to detect if we're in 16- or
# 32-bit mode, but in 32-bit mode we always run with CS == 8 in the
# kernel and CS == 35 in user space
if $cs == 8 || $cs == 35
if $lastcs != 8 && $lastcs != 35
set architecture i386
end
x/i $pc
else
if $lastcs == -1 || $lastcs == 8 || $lastcs == 35
set architecture i8086
end
# Translate the segment:offset into a physical address
printf "[%4x:%4x] ", $cs, $eip
x/i $cs*16+$eip
end
set $lastcs = $cs
end
echo + target remote localhost:1234\n
target remote localhost:1234
echo + symbol-file kernel\n
symbol-file kernel

5
.gdbinit.tmpl-i386 Normal file
View file

@ -0,0 +1,5 @@
python
gdb.execute("target remote localhost:26000")
gdb.execute("set architecture i386")
gdb.execute("symbol-file kernel")
gdb.execute("break *0x7c00")

18
.gdbinit.tmpl-x64 Normal file
View file

@ -0,0 +1,18 @@
#if you would like to use gdb in 32bit mode, comment out lines 8 and 15, then uncomment
#the lines after. Note this will only work properly until 64bit mode is enabled in entry.S
python
gdb.execute("set architecture i386:x86-64:intel")
gdb.execute("target remote localhost:26000")
gdb.execute("symbol-file kernel")
gdb.execute("break start64")
#gdb.execute("break *0x7c00")
try:
gdb.execute("continue")
except:
pass
gdb.execute("disconnect")
gdb.execute("set architecture i386:x86-64")
#gdb.execute("set architecture i386")
gdb.execute("target remote localhost:26000")
gdb.execute("delete break 1")

79
Makefile
View file

@ -51,7 +51,7 @@ TOOLPREFIX := $(shell if i386-jos-elf-objdump -i 2>&1 | grep '^elf32-i386$$' >/d
endif
# If the makefile can't find QEMU, specify its path here
# QEMU = qemu-system-i386
QEMU = qemu-system-x86_64
# Try to infer the correct QEMU
ifndef QEMU
@ -76,11 +76,16 @@ AS = $(TOOLPREFIX)gas
LD = $(TOOLPREFIX)ld
OBJCOPY = $(TOOLPREFIX)objcopy
OBJDUMP = $(TOOLPREFIX)objdump
CFLAGS = -fno-pic -static -fno-builtin -fno-strict-aliasing -O2 -Wall -MD -ggdb -m32 -Werror -fno-omit-frame-pointer
XFLAGS = -m64 -mcmodel=large -ggdb
# CFLAGS = -fno-pic -static -fno-builtin -fno-strict-aliasing -O2 -Wall -MD -ggdb -Werror -fno-omit-frame-pointer
CFLAGS = -fno-pic -static -fno-builtin -fno-strict-aliasing -Wall -MD -ggdb -Werror -fno-omit-frame-pointer
CFLAGS += -ffreestanding -fno-common -nostdlib $(XFLAGS)
CFLAGS += $(shell $(CC) -fno-stack-protector -E -x c /dev/null >/dev/null 2>&1 && echo -fno-stack-protector)
ASFLAGS = -m32 -gdwarf-2 -Wa,-divide
ASFLAGS = -gdwarf-2 -Wa,-divide $(XFLAGS)
# FreeBSD ld wants ``elf_i386_fbsd''
LDFLAGS += -m $(shell $(LD) -V | grep elf_i386 2>/dev/null | head -n 1)
LDFLAGS += -m $(shell $(LD) -V | grep elf_x86_64 2>/dev/null | head -n 1)
LDFLAGS += -z max-page-size=4096
# Disable PIE when possible (for Ubuntu 16.10 toolchain)
ifneq ($(shell $(CC) -dumpspecs 2>/dev/null | grep -e '[^f]no-pie'),)
@ -90,23 +95,10 @@ ifneq ($(shell $(CC) -dumpspecs 2>/dev/null | grep -e '[^f]nopie'),)
CFLAGS += -fno-pie -nopie
endif
xv6.img: bootblock kernel
dd if=/dev/zero of=xv6.img count=10000
dd if=bootblock of=xv6.img conv=notrunc
dd if=kernel of=xv6.img seek=1 conv=notrunc
xv6memfs.img: bootblock kernelmemfs
dd if=/dev/zero of=xv6memfs.img count=10000
dd if=bootblock of=xv6memfs.img conv=notrunc
dd if=kernelmemfs of=xv6memfs.img seek=1 conv=notrunc
bootblock: bootasm.S bootmain.c
$(CC) $(CFLAGS) -fno-pic -O -nostdinc -I. -c bootmain.c
$(CC) $(CFLAGS) -fno-pic -nostdinc -I. -c bootasm.S
$(LD) $(LDFLAGS) -N -e start -Ttext 0x7C00 -o bootblock.o bootasm.o bootmain.o
$(OBJDUMP) -S bootblock.o > bootblock.asm
$(OBJCOPY) -S -O binary -j .text bootblock.o bootblock
./sign.pl bootblock
kernel: $(OBJS) entry.o entryother initcode kernel.ld
$(LD) $(LDFLAGS) -T kernel.ld -o kernel entry.o $(OBJS) -b binary initcode entryother
$(OBJDUMP) -S kernel > kernel.asm
$(OBJDUMP) -t kernel | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernel.sym
entryother: entryother.S
$(CC) $(CFLAGS) -fno-pic -nostdinc -I. -c entryother.S
@ -120,23 +112,6 @@ initcode: initcode.S
$(OBJCOPY) -S -O binary initcode.out initcode
$(OBJDUMP) -S initcode.o > initcode.asm
kernel: $(OBJS) entry.o entryother initcode kernel.ld
$(LD) $(LDFLAGS) -T kernel.ld -o kernel entry.o $(OBJS) -b binary initcode entryother
$(OBJDUMP) -S kernel > kernel.asm
$(OBJDUMP) -t kernel | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernel.sym
# kernelmemfs is a copy of kernel that maintains the
# disk image in memory instead of writing to a disk.
# This is not so useful for testing persistent storage or
# exploring disk buffering implementations, but it is
# great for testing the kernel on real hardware without
# needing a scratch disk.
MEMFSOBJS = $(filter-out ide.o,$(OBJS)) memide.o
kernelmemfs: $(MEMFSOBJS) entry.o entryother initcode kernel.ld fs.img
$(LD) $(LDFLAGS) -T kernel.ld -o kernelmemfs entry.o $(MEMFSOBJS) -b binary initcode entryother fs.img
$(OBJDUMP) -S kernelmemfs > kernelmemfs.asm
$(OBJDUMP) -t kernelmemfs | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernelmemfs.sym
tags: $(OBJS) entryother.S _init
etags *.S *.c
@ -190,8 +165,8 @@ fs.img: mkfs README $(UPROGS)
clean:
rm -f *.tex *.dvi *.idx *.aux *.log *.ind *.ilg \
*.o *.d *.asm *.sym vectors.S bootblock entryother \
initcode initcode.out kernel xv6.img fs.img kernelmemfs \
xv6memfs.img mkfs .gdbinit \
initcode initcode.out kernel fs.img kernelmemfs \
mkfs .gdbinit \
$(UPROGS)
# make a printout
@ -204,12 +179,6 @@ xv6.pdf: $(PRINT)
print: xv6.pdf
# run in emulators
bochs : fs.img xv6.img
if [ ! -e .bochsrc ]; then ln -s dot-bochsrc .bochsrc; fi
bochs -q
# try to generate a unique GDB port
GDBPORT = $(shell expr `id -u` % 5000 + 25000)
# QEMU's gdb stub command line changed in 0.11
@ -219,25 +188,21 @@ QEMUGDB = $(shell if $(QEMU) -help | grep -q '^-gdb'; \
ifndef CPUS
CPUS := 2
endif
QEMUOPTS = -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp $(CPUS) -m 512 $(QEMUEXTRA)
qemu: fs.img xv6.img
QEMUOPTS = -kernel kernel -drive file=fs.img,index=1,media=disk,format=raw -smp $(CPUS) -m 512 $(QEMUEXTRA)
qemu: fs.img
$(QEMU) -serial mon:stdio $(QEMUOPTS)
qemu-memfs: xv6memfs.img
$(QEMU) -drive file=xv6memfs.img,index=0,media=disk,format=raw -smp $(CPUS) -m 256
qemu-nox: fs.img xv6.img
qemu-nox: fs.img kernel
$(QEMU) -nographic $(QEMUOPTS)
.gdbinit: .gdbinit.tmpl
.gdbinit: .gdbinit.tmpl-x64
sed "s/localhost:1234/localhost:$(GDBPORT)/" < $^ > $@
qemu-gdb: fs.img xv6.img .gdbinit
qemu-gdb: fs.img kernel .gdbinit
@echo "*** Now run 'gdb'." 1>&2
$(QEMU) -serial mon:stdio $(QEMUOPTS) -S $(QEMUGDB)
$(QEMU) $(QEMUOPTS) -S $(QEMUGDB)
qemu-nox-gdb: fs.img xv6.img .gdbinit
qemu-nox-gdb: fs.img kernel .gdbinit
@echo "*** Now run 'gdb'." 1>&2
$(QEMU) -nographic $(QEMUOPTS) -S $(QEMUGDB)

88
bootasm.S
View file

@ -1,88 +0,0 @@
#include "asm.h"
#include "memlayout.h"
#include "mmu.h"
# Start the first CPU: switch to 32-bit protected mode, jump into C.
# The BIOS loads this code from the first sector of the hard disk into
# memory at physical address 0x7c00 and starts executing in real mode
# with %cs=0 %ip=7c00.
.code16 # Assemble for 16-bit mode
.globl start
start:
cli # BIOS enabled interrupts; disable
# Zero data segment registers DS, ES, and SS.
xorw %ax,%ax # Set %ax to zero
movw %ax,%ds # -> Data Segment
movw %ax,%es # -> Extra Segment
movw %ax,%ss # -> Stack Segment
# Physical address line A20 is tied to zero so that the first PCs
# with 2 MB would run software that assumed 1 MB. Undo that.
seta20.1:
inb $0x64,%al # Wait for not busy
testb $0x2,%al
jnz seta20.1
movb $0xd1,%al # 0xd1 -> port 0x64
outb %al,$0x64
seta20.2:
inb $0x64,%al # Wait for not busy
testb $0x2,%al
jnz seta20.2
movb $0xdf,%al # 0xdf -> port 0x60
outb %al,$0x60
# Switch from real to protected mode. Use a bootstrap GDT that makes
# virtual addresses map directly to physical addresses so that the
# effective memory map doesn't change during the transition.
lgdt gdtdesc
movl %cr0, %eax
orl $CR0_PE, %eax
movl %eax, %cr0
//PAGEBREAK!
# Complete the transition to 32-bit protected mode by using a long jmp
# to reload %cs and %eip. The segment descriptors are set up with no
# translation, so that the mapping is still the identity mapping.
ljmp $(SEG_KCODE<<3), $start32
.code32 # Tell assembler to generate 32-bit code now.
start32:
# Set up the protected-mode data segment registers
movw $(SEG_KDATA<<3), %ax # Our data segment selector
movw %ax, %ds # -> DS: Data Segment
movw %ax, %es # -> ES: Extra Segment
movw %ax, %ss # -> SS: Stack Segment
movw $0, %ax # Zero segments not ready for use
movw %ax, %fs # -> FS
movw %ax, %gs # -> GS
# Set up the stack pointer and call into C.
movl $start, %esp
call bootmain
# If bootmain returns (it shouldn't), trigger a Bochs
# breakpoint if running under Bochs, then loop.
movw $0x8a00, %ax # 0x8a00 -> port 0x8a00
movw %ax, %dx
outw %ax, %dx
movw $0x8ae0, %ax # 0x8ae0 -> port 0x8a00
outw %ax, %dx
spin:
jmp spin
# Bootstrap GDT
.p2align 2 # force 4 byte alignment
gdt:
SEG_NULLASM # null seg
SEG_ASM(STA_X|STA_R, 0x0, 0xffffffff) # code seg
SEG_ASM(STA_W, 0x0, 0xffffffff) # data seg
gdtdesc:
.word (gdtdesc - gdt - 1) # sizeof(gdt) - 1
.long gdt # address gdt

30
console.c
View file

@ -2,6 +2,8 @@
// Input is from the keyboard or serial port.
// Output is written to the screen and serial port.
#include <stdarg.h>
#include "types.h"
#include "defs.h"
#include "param.h"
@ -24,10 +26,11 @@ static struct {
int locking;
} cons;
static char digits[] = "0123456789abcdef";
static void
printint(int xx, int base, int sign)
{
static char digits[] = "0123456789abcdef";
char buf[16];
int i;
uint x;
@ -48,14 +51,25 @@ printint(int xx, int base, int sign)
while(--i >= 0)
consputc(buf[i]);
}
static void
printptr(uint64 x) {
int i;
consputc('0');
consputc('x');
for (i = 0; i < (sizeof(uint64) * 2); i++, x <<= 4)
consputc(digits[x >> (sizeof(uint64) * 8 - 4)]);
}
//PAGEBREAK: 50
// Print to the console. only understands %d, %x, %p, %s.
void
cprintf(char *fmt, ...)
{
va_list ap;
int i, c, locking;
uint *argp;
char *s;
locking = cons.locking;
@ -65,7 +79,7 @@ cprintf(char *fmt, ...)
if (fmt == 0)
panic("null fmt");
argp = (uint*)(void*)(&fmt + 1);
va_start(ap, fmt);
for(i = 0; (c = fmt[i] & 0xff) != 0; i++){
if(c != '%'){
consputc(c);
@ -76,14 +90,16 @@ cprintf(char *fmt, ...)
break;
switch(c){
case 'd':
printint(*argp++, 10, 1);
printint(va_arg(ap, int), 10, 1);
break;
case 'x':
printint(va_arg(ap, int), 16, 1);
break;
case 'p':
printint(*argp++, 16, 0);
printptr(va_arg(ap, uint64));
break;
case 's':
if((s = (char*)*argp++) == 0)
if((s = va_arg(ap, char*)) == 0)
s = "(null)";
for(; *s; s++)
consputc(*s);
@ -107,7 +123,7 @@ void
panic(char *s)
{
int i;
uint pcs[10];
uint64 pcs[10];
cli();
cons.locking = 0;

12
defs.h
View file

@ -126,7 +126,7 @@ void swtch(struct context**, struct context*);
// spinlock.c
void acquire(struct spinlock*);
void getcallerpcs(void*, uint*);
void getcallerpcs(void*, uint64*);
int holding(struct spinlock*);
void initlock(struct spinlock*, char*);
void release(struct spinlock*);
@ -152,8 +152,10 @@ char* strncpy(char*, const char*, int);
int argint(int, int*);
int argptr(int, char**, int);
int argstr(int, char**);
int fetchint(uint, int*);
int fetchstr(uint, char**);
int argaddr(int, uint64 *);
int fetchint(uint64, int*);
int fetchstr(uint64, char**);
int fetchaddr(uint64, uint64*);
void syscall(void);
// timer.c
@ -176,8 +178,8 @@ void kvmalloc(void);
pde_t* setupkvm(void);
char* uva2ka(pde_t*, char*);
int allocuvm(pde_t*, uint, uint);
int deallocuvm(pde_t*, uint, uint);
void freevm(pde_t*);
int deallocuvm(pde_t*, uint64, uint64);
void freevm(pde_t*, uint64);
void inituvm(pde_t*, char*, uint);
int loaduvm(pde_t*, char*, struct inode*, uint, uint);
pde_t* copyuvm(pde_t*, uint);

22
elf.h
View file

@ -9,9 +9,9 @@ struct elfhdr {
ushort type;
ushort machine;
uint version;
uint entry;
uint phoff;
uint shoff;
uint64 entry;
uint64 phoff;
uint64 shoff;
uint flags;
ushort ehsize;
ushort phentsize;
@ -23,14 +23,14 @@ struct elfhdr {
// Program section header
struct proghdr {
uint type;
uint off;
uint vaddr;
uint paddr;
uint filesz;
uint memsz;
uint flags;
uint align;
uint32 type;
uint32 flags;
uint64 off;
uint64 vaddr;
uint64 paddr;
uint64 filesz;
uint64 memsz;
uint64 align;
};
// Values for Proghdr type

251
entry.S
View file

@ -1,68 +1,223 @@
# The xv6 kernel starts executing in this file. This file is linked with
# the kernel C code, so it can refer to kernel symbols such as main().
# The boot block (bootasm.S and bootmain.c) jumps to entry below.
# Multiboot header, for multiboot boot loaders like GNU Grub.
# x86-64 bootstrap, assuming load by MultiBoot-compliant loader.
# The MutliBoot specification is at:
# http://www.gnu.org/software/grub/manual/multiboot/multiboot.html
#
# Using GRUB 2, you can boot xv6 from a file stored in a
# Linux file system by copying kernel or kernelmemfs to /boot
# and then adding this menu entry:
#
# menuentry "xv6" {
# insmod ext2
# set root='(hd0,msdos1)'
# set kernel='/boot/kernel'
# echo "Loading ${kernel}..."
# multiboot ${kernel} ${kernel}
# boot
# }
# GRUB is a MultiBoot loader, as is qemu's -kernel option.
#include "asm.h"
#include "memlayout.h"
#include "mmu.h"
#include "param.h"
#include "memlayout.h"
# Multiboot header. Data to direct multiboot loader.
.p2align 2
# STACK is the size of the bootstrap stack.
#define STACK 8192
# MultiBoot header.
# http://www.gnu.org/software/grub/manual/multiboot/multiboot.html#Header-layout
.align 4
.text
.globl multiboot_header
multiboot_header:
#define magic 0x1badb002
#define flags 0
#define flags (1<<16 | 1<<0)
.long magic
.long flags
.long (-magic-flags)
.long (- magic - flags) # checksum
.long V2P_WO(multiboot_header) # header address
.long V2P_WO(multiboot_header) # load address
.long V2P_WO(edata) # load end address
.long V2P_WO(end) # bss end address
.long V2P_WO(start) # entry address
# By convention, the _start symbol specifies the ELF entry point.
# Since we haven't set up virtual memory yet, our entry point is
# the physical address of 'entry'.
.globl _start
_start = V2P_WO(entry)
# Entry point jumped to by boot loader. Running in 32-bit mode.
# http://www.gnu.org/software/grub/manual/multiboot/multiboot.html#Machine-state
#
# EAX = 0x2badb002
# EBX = address of multiboot information structure
# CS = 32-bit read/execute code segment with identity map
# DS, ES, FS, GS, SS = 32-bit read/write data segment with identity map
# A20 gate = enabled
# CR0 = PE set, PG clear
# EFLAGS = VM clear, IF clear
#
.code32
.globl start
start:
# Tell BIOS to do "warm reboot" when we shut down.
movw $0x1234, 0x472
# Entering xv6 on boot processor, with paging off.
.globl entry
entry:
# Turn on page size extension for 4Mbyte pages
# Set up multiboot arguments for main.
movl %eax, %edi
movl %ebx, %esi
# Initialize stack.
movl $V2P_WO(stack+STACK), %esp
# Zero bss. QEMU's MultiBoot seems not to.
# It's possible that the header above is not right, but it looks right.
# %edi is holding multiboot argument, so save in another register.
# (The stack is in the bss.)
movl %edi, %edx
movl $V2P_WO(edata), %edi
movl $V2P_WO(end), %ecx
subl $V2P_WO(edata), %ecx
movl $0, %eax
cld
rep stosb
movl %edx, %edi
call loadgdt
# Enter new 32-bit code segment (already in 32-bit mode).
ljmp $KCSEG32, $V2P_WO(start32) // code32 segment selector
start32:
# Initialize page table.
call initpagetables
call init32e
movl $V2P_WO(start64), %eax
# Enter 64-bit mode.
ljmp $KCSEG, $V2P_WO(tramp64) // code64 segment selector
.code64
start64:
# Load VA of stack
movabsq $(stack+STACK), %rsp
# Clear frame pointer for stack walks
movl $0, %ebp
# Call into C code.
call bpmain
# should not return from bpmain
jmp .
.code32
.global apstart
apstart:
call loadgdt
ljmp $KCSEG32, $V2P_WO(apstart32) // code32 segment selector
apstart32:
call init32e
movl $V2P_WO(apstart64), %eax
ljmp $KCSEG, $V2P_WO(tramp64) // code64 segment selector
.code64
apstart64:
# Remember (from bootothers), that our kernel stack pointer is
# at the top of our temporary stack.
popq %rax
movq %rax, %rsp
movq $0, %rbp
call apmain
1: jmp 1b
.code64
tramp64:
# The linker thinks we are running at tramp64, but we're actually
# running at PADDR(tramp64), so use an explicit calculation to
# load and jump to the correct address. %rax should hold the
# physical address of the jmp target.
movq $KERNBASE, %r11
addq %r11, %rax
jmp *%rax
# Initial stack
.comm stack, STACK
# Page tables. See section 4.5 of 253668.pdf.
# We map the first GB of physical memory at 0 and at 1 TB (not GB) before
# the end of virtual memory. At boot time we are using the mapping at 0
# but during ordinary execution we use the high mapping.
# The intent is that after bootstrap the kernel can expand this mapping
# to cover all the available physical memory.
# This would be easier if we could use the PS bit to create GB-sized entries
# and skip the pdt table, but not all chips support it, and QEMU doesn't.
.align 4096
pml4:
.quad V2P_WO(pdpt) + PTE_P + PTE_W // present, read/write
.quad 0
.space 4096 - 2*16
.quad V2P_WO(pdpt) + PTE_P + PTE_W
.quad 0
.align 4096
pdpt:
.quad V2P_WO(pdt) + PTE_P + PTE_W
.space 4096 - 8
.align 4096
pdt:
// Filled in below.
.space 4096
.code32
initpagetables:
pushl %edi
pushl %ecx
pushl %eax
// Set up 64-bit entry in %edx:%eax.
// Base address 0, present, read/write, large page.
movl $(0 | PTE_P | PTE_W | PTE_PS), %eax
movl $0, %edx
// Fill in 512 entries at pdt.
movl $V2P_WO(pdt), %edi
movl $512, %ecx
1:
// Write this 64-bit entry.
movl %eax, 0(%edi)
movl %edx, 4(%edi)
addl $8, %edi
// 64-bit add to prepare address for next entry.
// Because this is a large page entry, it covers 512 4k pages (2 MB).
add $(512*4096), %eax
adc $0, %edx
loop 1b
popl %eax
popl %ecx
popl %edi
ret
# Initialize IA-32e mode. See section 9.8.5 of 253668.pdf.
init32e:
# Set CR4.PAE and CR4.PSE = 1.
movl %cr4, %eax
orl $(CR4_PSE), %eax
orl $0x30, %eax
movl %eax, %cr4
# Set page directory
movl $(V2P_WO(entrypgdir)), %eax
# Load CR3 with physical base address of level 4 page table.
movl $V2P_WO(pml4), %eax
movl %eax, %cr3
# Turn on paging.
# Enable IA-32e mode by setting IA32_EFER.LME = 1.
# Also turn on IA32_EFER.SCE (syscall enable).
movl $0xc0000080, %ecx
rdmsr
orl $0x101, %eax
wrmsr
# Enable paging by setting CR0.PG = 1.
movl %cr0, %eax
orl $(CR0_PG|CR0_WP), %eax
orl $0x80000000, %eax
movl %eax, %cr0
nop
nop
# Set up the stack pointer.
movl $(stack + KSTACKSIZE), %esp
ret
# Jump to main(), and switch to executing at
# high addresses. The indirect call is needed because
# the assembler produces a PC-relative instruction
# for a direct jump.
mov $main, %eax
jmp *%eax
loadgdt:
subl $8, %esp
movl $V2P_WO(bootgdt), 4(%esp)
movw $(8*NSEGS-1), 2(%esp)
lgdt 2(%esp)
addl $8, %esp
.comm stack, KSTACKSIZE
movl $KDSEG, %eax // data segment selector
movw %ax, %ds
movw %ax, %es
movw %ax, %ss
movl $0, %eax // null segment selector
movw %ax, %fs
movw %ax, %gs
ret

57
entryother.S
View file

@ -13,11 +13,9 @@
#
# Startothers (in main.c) sends the STARTUPs one at a time.
# It copies this code (start) at 0x7000. It puts the address of
# a newly allocated per-core stack in start-4,the address of the
# place to jump to (mpenter) in start-8, and the physical address
# a newly allocated per-core stack in start-12,the address of the
# place to jump to (apstart32) in start-4, and the physical address
# of entrypgdir in start-12.
#
# This code combines elements of bootasm.S and entry.S.
.code16
.globl start
@ -41,53 +39,22 @@ start:
# Complete the transition to 32-bit protected mode by using a long jmp
# to reload %cs and %eip. The segment descriptors are set up with no
# translation, so that the mapping is still the identity mapping.
ljmpl $(SEG_KCODE<<3), $(start32)
ljmpl $(KCSEG32), $start32
//PAGEBREAK!
.code32 # Tell assembler to generate 32-bit code now.
.code32
start32:
# Set up the protected-mode data segment registers
movw $(SEG_KDATA<<3), %ax # Our data segment selector
movw %ax, %ds # -> DS: Data Segment
movw %ax, %es # -> ES: Extra Segment
movw %ax, %ss # -> SS: Stack Segment
movw $0, %ax # Zero segments not ready for use
movw %ax, %fs # -> FS
movw %ax, %gs # -> GS
movl $start-12, %esp
movl start-4, %ecx
jmp *%ecx
# Turn on page size extension for 4Mbyte pages
movl %cr4, %eax
orl $(CR4_PSE), %eax
movl %eax, %cr4
# Use entrypgdir as our initial page table
movl (start-12), %eax
movl %eax, %cr3
# Turn on paging.
movl %cr0, %eax
orl $(CR0_PE|CR0_PG|CR0_WP), %eax
movl %eax, %cr0
# Switch to the stack allocated by startothers()
movl (start-4), %esp
# Call mpenter()
call *(start-8)
movw $0x8a00, %ax
movw %ax, %dx
outw %ax, %dx
movw $0x8ae0, %ax
outw %ax, %dx
spin:
jmp spin
.p2align 2
.align 4
gdt:
SEG_NULLASM
SEG_ASM(STA_X|STA_R, 0, 0xffffffff)
SEG_ASM(STA_W, 0, 0xffffffff)
SEG_ASM(0xa, 0, 0xffffffff)
SEG_ASM(0x2, 0, 0xffffffff)
.align 16
gdtdesc:
.word (gdtdesc - gdt - 1)
.word 0x17 # sizeof(gdt)-1
.long gdt

26
exec.c
View file

@ -4,6 +4,8 @@
#include "mmu.h"
#include "proc.h"
#include "defs.h"
#include "traps.h"
#include "msr.h"
#include "x86.h"
#include "elf.h"
@ -12,18 +14,18 @@ exec(char *path, char **argv)
{
char *s, *last;
int i, off;
uint argc, sz, sp, ustack[3+MAXARG+1];
uint64 argc, sz, sp, ustack[3+MAXARG+1];
struct elfhdr elf;
struct inode *ip;
struct proghdr ph;
pde_t *pgdir, *oldpgdir;
struct proc *curproc = myproc();
uint64 oldsz = curproc->sz;
begin_op();
if((ip = namei(path)) == 0){
end_op();
cprintf("exec: fail\n");
return -1;
}
ilock(ip);
@ -72,7 +74,7 @@ exec(char *path, char **argv)
for(argc = 0; argv[argc]; argc++) {
if(argc >= MAXARG)
goto bad;
sp = (sp - (strlen(argv[argc]) + 1)) & ~3;
sp = (sp - (strlen(argv[argc]) + 1)) & ~(sizeof(uint64)-1);
if(copyout(pgdir, sp, argv[argc], strlen(argv[argc]) + 1) < 0)
goto bad;
ustack[3+argc] = sp;
@ -81,10 +83,13 @@ exec(char *path, char **argv)
ustack[0] = 0xffffffff; // fake return PC
ustack[1] = argc;
ustack[2] = sp - (argc+1)*4; // argv pointer
ustack[2] = sp - (argc+1)*sizeof(uint64); // argv pointer
sp -= (3+argc+1) * 4;
if(copyout(pgdir, sp, ustack, (3+argc+1)*4) < 0)
curproc->tf->rdi = argc;
curproc->tf->rsi = sp - (argc+1)*sizeof(uint64);
sp -= (3+argc+1) * sizeof(uint64);
if(copyout(pgdir, sp, ustack, (3+argc+1)*sizeof(uint64)) < 0)
goto bad;
// Save program name for debugging.
@ -97,15 +102,16 @@ exec(char *path, char **argv)
oldpgdir = curproc->pgdir;
curproc->pgdir = pgdir;
curproc->sz = sz;
curproc->tf->eip = elf.entry; // main
curproc->tf->esp = sp;
curproc->tf->rip = elf.entry; // main
curproc->tf->rcx = elf.entry;
curproc->tf->rsp = sp;
switchuvm(curproc);
freevm(oldpgdir);
freevm(oldpgdir, oldsz);
return 0;
bad:
if(pgdir)
freevm(pgdir);
freevm(pgdir, sz);
if(ip){
iunlockput(ip);
end_op();

13
initcode.S
View file

@ -8,16 +8,15 @@
# exec(init, argv)
.globl start
start:
pushl $argv
pushl $init
pushl $0 // where caller pc would be
movl $SYS_exec, %eax
int $T_SYSCALL
mov $init, %rdi
mov $argv, %rsi
mov $SYS_exec, %rax
syscall
# for(;;) exit();
exit:
movl $SYS_exit, %eax
int $T_SYSCALL
mov $SYS_exit, %rax
syscall
jmp exit
# char init[] = "/init\0";

3
ioapic.c
View file

@ -4,6 +4,7 @@
#include "types.h"
#include "defs.h"
#include "memlayout.h"
#include "traps.h"
#define IOAPIC 0xFEC00000 // Default physical address of IO APIC
@ -50,7 +51,7 @@ ioapicinit(void)
{
int i, id, maxintr;
ioapic = (volatile struct ioapic*)IOAPIC;
ioapic = P2V((volatile struct ioapic*)IOAPIC);
maxintr = (ioapicread(REG_VER) >> 16) & 0xFF;
id = ioapicread(REG_ID) >> 24;
if(id != ioapicid)

6
kalloc.c
View file

@ -47,7 +47,7 @@ void
freerange(void *vstart, void *vend)
{
char *p;
p = (char*)PGROUNDUP((uint)vstart);
p = (char*)PGROUNDUP((uint64)vstart);
for(; p + PGSIZE <= (char*)vend; p += PGSIZE)
kfree(p);
}
@ -61,7 +61,7 @@ kfree(char *v)
{
struct run *r;
if((uint)v % PGSIZE || v < end || V2P(v) >= PHYSTOP)
if((uint64)v % PGSIZE || v < end || V2P(v) >= PHYSTOP)
panic("kfree");
// Fill with junk to catch dangling refs.
@ -91,6 +91,8 @@ kalloc(void)
kmem.freelist = r->next;
if(kmem.use_lock)
release(&kmem.lock);
if(r != 0 && (uint64) r < KERNBASE)
panic("kalloc");
return (char*)r;
}

27
kernel.ld
View file

@ -1,22 +1,13 @@
/* Simple linker script for the JOS kernel.
See the GNU ld 'info' manual ("info ld") to learn the syntax. */
OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
OUTPUT_ARCH(i386)
ENTRY(_start)
OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
OUTPUT_ARCH(i386:x86-64)
SECTIONS
{
/* Link the kernel at this address: "." means the current address */
/* Must be equal to KERNLINK */
. = 0x80100000;
. = 0xFFFFFF0000100000;
PROVIDE(text = .);
.text : AT(0x100000) {
*(.text .stub .text.* .gnu.linkonce.t.*)
}
PROVIDE(etext = .); /* Define the 'etext' symbol to this value */
.rodata : {
*(.rodata .rodata.* .gnu.linkonce.r.*)
}
@ -38,7 +29,6 @@ SECTIONS
for this section */
}
/* Adjust the address for the data segment to the next page */
. = ALIGN(0x1000);
/* Conventionally, Unix linkers provide pseudo-symbols
@ -48,21 +38,12 @@ SECTIONS
* symbols, because the convention started before there was a
* read-only rodata section between text and data. */
PROVIDE(data = .);
/* The data segment */
.data : {
*(.data)
}
PROVIDE(edata = .);
.bss : {
*(.bss)
}
PROVIDE(end = .);
/DISCARD/ : {
*(.eh_frame .note.GNU-stack)
}
}

67
main.c
View file

@ -6,17 +6,22 @@
#include "proc.h"
#include "x86.h"
static void startothers(void);
static void mpmain(void) __attribute__((noreturn));
extern pde_t *kpgdir;
extern char end[]; // first address after kernel loaded from ELF file
static void main(void) __attribute__((noreturn));
static void startothers(void);
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
bpmain(uint64 mbmagic, uint64 mbaddr)
{
if(mbmagic != 0x2badb002)
panic("multiboot header not found");
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
@ -31,25 +36,18 @@ main(void)
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
}
// Other CPUs jump here from entryother.S.
static void
mpenter(void)
{
switchkvm();
seginit();
lapicinit();
mpmain();
main();
return 0;
}
// Common CPU setup code.
static void
mpmain(void)
main(void)
{
cprintf("cpu%d: starting %d\n", cpuid(), cpuid());
idtinit(); // load idt register
@ -57,7 +55,17 @@ mpmain(void)
scheduler(); // start running processes
}
pde_t entrypgdir[]; // For entry.S
// Other CPUs jump here from entryother.S.
void
apmain(void)
{
switchkvm();
seginit();
lapicinit();
main();
}
void apstart(void);
// Start the non-boot (AP) processors.
static void
@ -72,7 +80,7 @@ startothers(void)
// The linker has placed the image of entryother.S in
// _binary_entryother_start.
code = P2V(0x7000);
memmove(code, _binary_entryother_start, (uint)_binary_entryother_size);
memmove(code, _binary_entryother_start, (uint64)_binary_entryother_size);
for(c = cpus; c < cpus+ncpu; c++){
if(c == mycpu()) // We've started already.
@ -82,9 +90,8 @@ startothers(void)
// pgdir to use. We cannot use kpgdir yet, because the AP processor
// is running in low memory, so we use entrypgdir for the APs too.
stack = kalloc();
*(void**)(code-4) = stack + KSTACKSIZE;
*(void(**)(void))(code-8) = mpenter;
*(int**)(code-12) = (void *) V2P(entrypgdir);
*(uint32*)(code-4) = V2P(apstart);
*(uint64*)(code-12) = (uint64) (stack+KSTACKSIZE);
lapicstartap(c->apicid, V2P(code));
@ -94,23 +101,3 @@ startothers(void)
}
}
// The boot page table used in entry.S and entryother.S.
// Page directories (and page tables) must start on page boundaries,
// hence the __aligned__ attribute.
// PTE_PS in a page directory entry enables 4Mbyte pages.
__attribute__((__aligned__(PGSIZE)))
pde_t entrypgdir[NPDENTRIES] = {
// Map VA's [0, 4MB) to PA's [0, 4MB)
[0] = (0) | PTE_P | PTE_W | PTE_PS,
// Map VA's [KERNBASE, KERNBASE+4MB) to PA's [0, 4MB)
[KERNBASE>>PDXSHIFT] = (0) | PTE_P | PTE_W | PTE_PS,
};
//PAGEBREAK!
// Blank page.
//PAGEBREAK!
// Blank page.
//PAGEBREAK!
// Blank page.

7
memlayout.h
View file

@ -2,13 +2,14 @@
#define EXTMEM 0x100000 // Start of extended memory
#define PHYSTOP 0xE000000 // Top physical memory
#define DEVSPACE 0xFE000000 // Other devices are at high addresses
#define DEVSPACE 0xFE000000 // Other devices are top of 32-bit address space
#define DEVSPACETOP 0x100000000
// Key addresses for address space layout (see kmap in vm.c for layout)
#define KERNBASE 0x80000000 // First kernel virtual address
#define KERNBASE 0xFFFFFF0000000000 // First kernel virtual address
#define KERNLINK (KERNBASE+EXTMEM) // Address where kernel is linked
#define V2P(a) (((uint) (a)) - KERNBASE)
#define V2P(a) (((uint64) (a)) - KERNBASE)
#define P2V(a) ((void *)(((char *) (a)) + KERNBASE))
#define V2P_WO(x) ((x) - KERNBASE) // same as V2P, but without casts

232
mmu.h
View file

@ -2,8 +2,10 @@
// x86 memory management unit (MMU).
// Eflags register
#define FL_TF 0x00000100 // Trap Flag
#define FL_IF 0x00000200 // Interrupt Enable
// Control Register flags
#define CR0_PE 0x00000001 // Protection Enable
#define CR0_WP 0x00010000 // Write Protect
@ -11,81 +13,104 @@
#define CR4_PSE 0x00000010 // Page size extension
// various segment selectors.
#define SEG_KCODE 1 // kernel code
#define SEG_KDATA 2 // kernel data+stack
#define SEG_UCODE 3 // user code
#define SEG_UDATA 4 // user data+stack
#define SEG_TSS 5 // this process's task state
// Segment selectors (indexes) in our GDTs.
// Defined by our convention, not the architecture.
#define KCSEG32 (1<<3) /* kernel 32-bit code segment */
#define KCSEG (2<<3) /* kernel code segment */
#define KDSEG (3<<3) /* kernel data segment */
#define TSSSEG (4<<3) /* tss segment - takes two slots */
#define UDSEG (6<<3) /* user data segment */
#define UCSEG (7<<3) /* user code segment */
// cpu->gdt[NSEGS] holds the above segments.
#define NSEGS 6
#define NSEGS 8
#ifndef __ASSEMBLER__
// Segment Descriptor
struct segdesc {
uint lim_15_0 : 16; // Low bits of segment limit
uint base_15_0 : 16; // Low bits of segment base address
uint base_23_16 : 8; // Middle bits of segment base address
uint type : 4; // Segment type (see STS_ constants)
uint s : 1; // 0 = system, 1 = application
uint dpl : 2; // Descriptor Privilege Level
uint p : 1; // Present
uint lim_19_16 : 4; // High bits of segment limit
uint avl : 1; // Unused (available for software use)
uint rsv1 : 1; // Reserved
uint db : 1; // 0 = 16-bit segment, 1 = 32-bit segment
uint g : 1; // Granularity: limit scaled by 4K when set
uint base_31_24 : 8; // High bits of segment base address
uint16 limit0;
uint16 base0;
uint8 base1;
uint8 bits;
uint8 bitslimit1;
uint8 base2;
};
// Normal segment
#define SEG(type, base, lim, dpl) (struct segdesc) \
{ ((lim) >> 12) & 0xffff, (uint)(base) & 0xffff, \
((uint)(base) >> 16) & 0xff, type, 1, dpl, 1, \
(uint)(lim) >> 28, 0, 0, 1, 1, (uint)(base) >> 24 }
#define SEG16(type, base, lim, dpl) (struct segdesc) \
{ (lim) & 0xffff, (uint)(base) & 0xffff, \
((uint)(base) >> 16) & 0xff, type, 1, dpl, 1, \
(uint)(lim) >> 16, 0, 0, 1, 0, (uint)(base) >> 24 }
// SEGDESC constructs a segment descriptor literal
// with the given, base, limit, and type bits.
#define SEGDESC(base, limit, bits) (struct segdesc){ \
(limit)&0xffff, (base)&0xffff, \
((base)>>16)&0xff, \
(bits)&0xff, \
(((bits)>>4)&0xf0) | ((limit>>16)&0xf), \
((base)>>24)&0xff, \
}
// SEGDESCHI constructs an extension segment descriptor
// literal that records the high bits of base.
#define SEGDESCHI(base) (struct segdesc) { \
(((base)>>32)&0xffff), (((base)>>48)&0xffff), \
}
#endif
#define DPL_USER 0x3 // User DPL
#define SEG_A (1<<0) /* segment accessed bit */
#define SEG_R (1<<1) /* readable (code) */
#define SEG_W (1<<1) /* writable (data) */
#define SEG_C (1<<2) /* conforming segment (code) */
#define SEG_E (1<<2) /* expand-down bit (data) */
#define SEG_CODE (1<<3) /* code segment (instead of data) */
// User and system segment bits.
#define SEG_S (1<<4) /* if 0, system descriptor */
#define SEG_DPL(x) ((x)<<5) /* descriptor privilege level (2 bits) */
#define SEG_P (1<<7) /* segment present */
#define SEG_AVL (1<<8) /* available for operating system use */
#define SEG_L (1<<9) /* long mode */
#define SEG_D (1<<10) /* default operation size 32-bit */
#define SEG_G (1<<11) /* granularity */
// Application segment type bits
#define STA_X 0x8 // Executable segment
#define STA_W 0x2 // Writeable (non-executable segments)
#define STA_R 0x2 // Readable (executable segments)
// System segment type bits
#define STS_T32A 0x9 // Available 32-bit TSS
#define STS_IG32 0xE // 32-bit Interrupt Gate
#define STS_TG32 0xF // 32-bit Trap Gate
#define SEG_LDT (2<<0) /* local descriptor table */
#define SEG_TSS64A (9<<0) /* available 64-bit TSS */
#define SEG_TSS64B (11<<0) /* busy 64-bit TSS */
#define SEG_CALL64 (12<<0) /* 64-bit call gate */
#define SEG_INTR64 (14<<0) /* 64-bit interrupt gate */
#define SEG_TRAP64 (15<<0) /* 64-bit trap gate */
// A virtual address 'la' has a three-part structure as follows:
// A virtual address 'la' has a six-part structure as follows:
//
// +--------10------+-------10-------+---------12----------+
// | Page Directory | Page Table | Offset within Page |
// | Index | Index | |
// +----------------+----------------+---------------------+
// \--- PDX(va) --/ \--- PTX(va) --/
// +--16--+---9---+------9-------+-----9----+----9-------+----12-------+
// | Sign | PML4 |Page Directory| Page Dir |Page Table | Offset Page |
// |Extend| Index | Pointer Index| Index | Index | in Page |
// +------+-------+--------------+----------+------------+-------------+
// \-PMX(va)-/\-PDPX(va)--/ \-PDX(va)-/ \-PTX(va)-/
#define PMX(va) (((uint64)(va) >> PML4XSHIFT) & PXMASK)
#define PDPX(va) (((uint64)(va) >> PDPXSHIFT) & PXMASK)
// page directory index
#define PDX(va) (((uint)(va) >> PDXSHIFT) & 0x3FF)
#define PDX(va) (((uint64)(va) >> PDXSHIFT) & PXMASK)
// page table index
#define PTX(va) (((uint)(va) >> PTXSHIFT) & 0x3FF)
#define PTX(va) (((uint64)(va) >> PTXSHIFT) & PXMASK)
// construct virtual address from indexes and offset
#define PGADDR(d, t, o) ((uint)((d) << PDXSHIFT | (t) << PTXSHIFT | (o)))
#define PGADDR(d, t, o) ((uint64)((d) << PDXSHIFT | (t) << PTXSHIFT | (o)))
// Page directory and page table constants.
#define NPDENTRIES 1024 // # directory entries per page directory
#define NPTENTRIES 1024 // # PTEs per page table
#define NPDENTRIES 512 // # directory entries per page directory
#define NPTENTRIES 512 // # PTEs per page table
#define PGSIZE 4096 // bytes mapped by a page
#define PTXSHIFT 12 // offset of PTX in a linear address
#define PDXSHIFT 22 // offset of PDX in a linear address
#define PDXSHIFT 21 // offset of PDX in a linear address
#define PDPXSHIFT 30 // offset of PDPX in a linear address
#define PML4XSHIFT 39 // offset of PML4X in a linear address
#define PXMASK 0X1FF
#define PGROUNDUP(sz) (((sz)+PGSIZE-1) & ~(PGSIZE-1))
#define PGROUNDDOWN(a) (((a)) & ~(PGSIZE-1))
@ -95,87 +120,54 @@ struct segdesc {
#define PTE_W 0x002 // Writeable
#define PTE_U 0x004 // User
#define PTE_PS 0x080 // Page Size
#define PTE_PWT 0x008 // Write-Through
#define PTE_PCD 0x010 // Cache-Disable
// Address in page table or page directory entry
#define PTE_ADDR(pte) ((uint)(pte) & ~0xFFF)
#define PTE_FLAGS(pte) ((uint)(pte) & 0xFFF)
#define PTE_ADDR(pte) ((uint64)(pte) & ~0xFFF)
#define PTE_FLAGS(pte) ((uint64)(pte) & 0xFFF)
#ifndef __ASSEMBLER__
typedef uint pte_t;
// Task state segment format
typedef uint64 pml4e_t;
typedef uint64 pdpe_t;
typedef uint64 pte_t;
struct taskstate {
uint link; // Old ts selector
uint esp0; // Stack pointers and segment selectors
ushort ss0; // after an increase in privilege level
ushort padding1;
uint *esp1;
ushort ss1;
ushort padding2;
uint *esp2;
ushort ss2;
ushort padding3;
void *cr3; // Page directory base
uint *eip; // Saved state from last task switch
uint eflags;
uint eax; // More saved state (registers)
uint ecx;
uint edx;
uint ebx;
uint *esp;
uint *ebp;
uint esi;
uint edi;
ushort es; // Even more saved state (segment selectors)
ushort padding4;
ushort cs;
ushort padding5;
ushort ss;
ushort padding6;
ushort ds;
ushort padding7;
ushort fs;
ushort padding8;
ushort gs;
ushort padding9;
ushort ldt;
ushort padding10;
ushort t; // Trap on task switch
ushort iomb; // I/O map base address
uint8 reserved0[4];
uint64 rsp[3];
uint64 ist[8];
uint8 reserved1[10];
uint16 iomba;
uint8 iopb[0];
} __attribute__ ((packed));
#define INT_P (1<<7) /* interrupt descriptor present */
struct intgate
{
uint16 rip0;
uint16 cs;
uint8 reserved0;
uint8 bits;
uint16 rip1;
uint32 rip2;
uint32 reserved1;
};
// Gate descriptors for interrupts and traps
struct gatedesc {
uint off_15_0 : 16; // low 16 bits of offset in segment
uint cs : 16; // code segment selector
uint args : 5; // # args, 0 for interrupt/trap gates
uint rsv1 : 3; // reserved(should be zero I guess)
uint type : 4; // type(STS_{IG32,TG32})
uint s : 1; // must be 0 (system)
uint dpl : 2; // descriptor(meaning new) privilege level
uint p : 1; // Present
uint off_31_16 : 16; // high bits of offset in segment
};
// Set up a normal interrupt/trap gate descriptor.
// - istrap: 1 for a trap (= exception) gate, 0 for an interrupt gate.
// interrupt gate clears FL_IF, trap gate leaves FL_IF alone
// - sel: Code segment selector for interrupt/trap handler
// - off: Offset in code segment for interrupt/trap handler
// - dpl: Descriptor Privilege Level -
// the privilege level required for software to invoke
// this interrupt/trap gate explicitly using an int instruction.
#define SETGATE(gate, istrap, sel, off, d) \
{ \
(gate).off_15_0 = (uint)(off) & 0xffff; \
(gate).cs = (sel); \
(gate).args = 0; \
(gate).rsv1 = 0; \
(gate).type = (istrap) ? STS_TG32 : STS_IG32; \
(gate).s = 0; \
(gate).dpl = (d); \
(gate).p = 1; \
(gate).off_31_16 = (uint)(off) >> 16; \
// INTDESC constructs an interrupt descriptor literal
// that records the given code segment, instruction pointer,
// and type bits.
#define INTDESC(cs, rip, bits) (struct intgate){ \
(rip)&0xffff, (cs), 0, bits, ((rip)>>16)&0xffff, \
(uint64)(rip)>>32, 0, \
}
// See section 4.6 of amd64 vol2
struct desctr
{
uint16 limit;
uint64 base;
} __attribute__((packed, aligned(16))); // important!
#endif

6
mp.c
View file

@ -28,7 +28,7 @@ sum(uchar *addr, int len)
// Look for an MP structure in the len bytes at addr.
static struct mp*
mpsearch1(uint a, int len)
mpsearch1(uint64 a, int len)
{
uchar *e, *p, *addr;
@ -77,7 +77,7 @@ mpconfig(struct mp **pmp)
if((mp = mpsearch()) == 0 || mp->physaddr == 0)
return 0;
conf = (struct mpconf*) P2V((uint) mp->physaddr);
conf = (struct mpconf*) P2V((uint64) mp->physaddr);
if(memcmp(conf, "PCMP", 4) != 0)
return 0;
if(conf->version != 1 && conf->version != 4)
@ -101,7 +101,7 @@ mpinit(void)
if((conf = mpconfig(&mp)) == 0)
panic("Expect to run on an SMP");
ismp = 1;
lapic = (uint*)conf->lapicaddr;
lapic = P2V((uint64)conf->lapicaddr_p);
for(p=(uchar*)(conf+1), e=(uchar*)conf+conf->length; p<e; ){
switch(*p){
case MPPROC:

8
mp.h
View file

@ -2,7 +2,7 @@
struct mp { // floating pointer
uchar signature[4]; // "_MP_"
void *physaddr; // phys addr of MP config table
uint32 physaddr; // phys addr of MP config table
uchar length; // 1
uchar specrev; // [14]
uchar checksum; // all bytes must add up to 0
@ -17,10 +17,10 @@ struct mpconf { // configuration table header
uchar version; // [14]
uchar checksum; // all bytes must add up to 0
uchar product[20]; // product id
uint *oemtable; // OEM table pointer
uint32 oemtable; // OEM table pointer
ushort oemlength; // OEM table length
ushort entry; // entry count
uint *lapicaddr; // address of local APIC
uint32 lapicaddr_p; // address of local APIC
ushort xlength; // extended table length
uchar xchecksum; // extended table checksum
uchar reserved;
@ -42,7 +42,7 @@ struct mpioapic { // I/O APIC table entry
uchar apicno; // I/O APIC id
uchar version; // I/O APIC version
uchar flags; // I/O APIC flags
uint *addr; // I/O APIC address
uint32 addr_p; // I/O APIC address
};
// Table entry types

25
msr.h Normal file
View file

@ -0,0 +1,25 @@
// SYSCALL and SYSRET registers
#define MSR_STAR 0xc0000081
#define MSR_LSTAR 0xc0000082
#define MSR_CSTAR 0xc0000083
#define MSR_SFMASK 0xc0000084
// GS
#define MSR_GS_BASE 0xc0000101
#define MSR_GS_KERNBASE 0xc0000102
static inline uint64
readmsr(uint32 msr)
{
uint32 hi, lo;
__asm volatile("rdmsr" : "=d" (hi), "=a" (lo) : "c" (msr));
return ((uint64) lo) | (((uint64) hi) << 32);
}
static inline void
writemsr(uint64 msr, uint64 val)
{
uint32 lo = val & 0xffffffff;
uint32 hi = val >> 32;
__asm volatile("wrmsr" : : "c" (msr), "a" (lo), "d" (hi) : "memory");
}

34
printf.c
View file

@ -2,6 +2,10 @@
#include "stat.h"
#include "user.h"
#include <stdarg.h>
static char digits[] = "0123456789ABCDEF";
static void
putc(int fd, char c)
{
@ -11,7 +15,6 @@ putc(int fd, char c)
static void
printint(int fd, int xx, int base, int sgn)
{
static char digits[] = "0123456789ABCDEF";
char buf[16];
int i, neg;
uint x;
@ -35,16 +38,25 @@ printint(int fd, int xx, int base, int sgn)
putc(fd, buf[i]);
}
static void
printptr(int fd, uint64 x) {
int i;
putc(fd, '0');
putc(fd, 'x');
for (i = 0; i < (sizeof(uint64) * 2); i++, x <<= 4)
putc(fd, digits[x >> (sizeof(uint64) * 8 - 4)]);
}
// Print to the given fd. Only understands %d, %x, %p, %s.
void
printf(int fd, const char *fmt, ...)
{
va_list ap;
char *s;
int c, i, state;
uint *ap;
va_start(ap, fmt);
state = 0;
ap = (uint*)(void*)&fmt + 1;
for(i = 0; fmt[i]; i++){
c = fmt[i] & 0xff;
if(state == 0){
@ -55,14 +67,13 @@ printf(int fd, const char *fmt, ...)
}
} else if(state == '%'){
if(c == 'd'){
printint(fd, *ap, 10, 1);
ap++;
} else if(c == 'x' || c == 'p'){
printint(fd, *ap, 16, 0);
ap++;
printint(fd, va_arg(ap, int), 10, 1);
} else if(c == 'x') {
printint(fd, va_arg(ap, int), 16, 0);
} else if(c == 'p') {
printptr(fd, va_arg(ap, uint64));
} else if(c == 's'){
s = (char*)*ap;
ap++;
s = va_arg(ap, char*);
if(s == 0)
s = "(null)";
while(*s != 0){
@ -70,8 +81,7 @@ printf(int fd, const char *fmt, ...)
s++;
}
} else if(c == 'c'){
putc(fd, *ap);
ap++;
putc(fd, va_arg(ap, uint));
} else if(c == '%'){
putc(fd, c);
} else {

30
proc.c
View file

@ -6,6 +6,7 @@
#include "x86.h"
#include "proc.h"
#include "spinlock.h"
#include "msr.h"
struct {
struct spinlock lock;
@ -16,7 +17,7 @@ static struct proc *initproc;
int nextpid = 1;
extern void forkret(void);
extern void trapret(void);
extern void sysexit(void);
static void wakeup1(void *chan);
@ -104,13 +105,13 @@ found:
// Set up new context to start executing at forkret,
// which returns to trapret.
sp -= 4;
*(uint*)sp = (uint)trapret;
sp -= sizeof(uint64);
*(uint64*)sp = (uint64)sysexit;
sp -= sizeof *p->context;
p->context = (struct context*)sp;
memset(p->context, 0, sizeof *p->context);
p->context->eip = (uint)forkret;
p->context->eip = (uint64)forkret;
return p;
}
@ -128,16 +129,12 @@ userinit(void)
initproc = p;
if((p->pgdir = setupkvm()) == 0)
panic("userinit: out of memory?");
inituvm(p->pgdir, _binary_initcode_start, (int)_binary_initcode_size);
inituvm(p->pgdir, _binary_initcode_start, (uint64)_binary_initcode_size);
p->sz = PGSIZE;
memset(p->tf, 0, sizeof(*p->tf));
p->tf->cs = (SEG_UCODE << 3) | DPL_USER;
p->tf->ds = (SEG_UDATA << 3) | DPL_USER;
p->tf->es = p->tf->ds;
p->tf->ss = p->tf->ds;
p->tf->eflags = FL_IF;
p->tf->esp = PGSIZE;
p->tf->eip = 0; // beginning of initcode.S
p->tf->r11 = FL_IF;
p->tf->rsp = PGSIZE;
p->tf->rcx = 0; // beginning of initcode.S
safestrcpy(p->name, "initcode", sizeof(p->name));
p->cwd = namei("/");
@ -201,7 +198,7 @@ fork(void)
*np->tf = *curproc->tf;
// Clear %eax so that fork returns 0 in the child.
np->tf->eax = 0;
np->tf->rax = 0;
for(i = 0; i < NOFILE; i++)
if(curproc->ofile[i])
@ -289,7 +286,7 @@ wait(void)
pid = p->pid;
kfree(p->kstack);
p->kstack = 0;
freevm(p->pgdir);
freevm(p->pgdir, p->sz);
p->pid = 0;
p->parent = 0;
p->name[0] = 0;
@ -339,6 +336,7 @@ scheduler(void)
// Switch to chosen process. It is the process's job
// to release ptable.lock and then reacquire it
// before jumping back to us.
c->proc = p;
switchuvm(p);
p->state = RUNNING;
@ -514,7 +512,7 @@ procdump(void)
int i;
struct proc *p;
char *state;
uint pc[10];
uint64 pc[10];
for(p = ptable.proc; p < &ptable.proc[NPROC]; p++){
if(p->state == UNUSED)
@ -525,7 +523,7 @@ procdump(void)
state = "???";
cprintf("%d %s %s", p->pid, state, p->name);
if(p->state == SLEEPING){
getcallerpcs((uint*)p->context->ebp+2, pc);
getcallerpcs((uint64*)p->context->ebp+2, pc);
for(i=0; i<10 && pc[i] != 0; i++)
cprintf(" %p", pc[i]);
}

21
proc.h
View file

@ -1,5 +1,8 @@
// Per-CPU state
struct cpu {
uint64 syscallno; // Temporary used by sysentry
uint64 usp; // Temporary used by sysentry
struct proc *proc; // The process running on this cpu or null
uchar apicid; // Local APIC ID
struct context *scheduler; // swtch() here to enter scheduler
struct taskstate ts; // Used by x86 to find stack for interrupt
@ -7,7 +10,6 @@ struct cpu {
volatile uint started; // Has the CPU started?
int ncli; // Depth of pushcli nesting.
int intena; // Were interrupts enabled before pushcli?
struct proc *proc; // The process running on this cpu or null
};
extern struct cpu cpus[NCPU];
@ -25,20 +27,23 @@ extern int ncpu;
// at the "Switch stacks" comment. Switch doesn't save eip explicitly,
// but it is on the stack and allocproc() manipulates it.
struct context {
uint edi;
uint esi;
uint ebx;
uint ebp;
uint eip;
uint64 r15;
uint64 r14;
uint64 r13;
uint64 r12;
uint64 r11;
uint64 rbx;
uint64 ebp; //rbp
uint64 eip; //rip;
};
enum procstate { UNUSED, EMBRYO, SLEEPING, RUNNABLE, RUNNING, ZOMBIE };
// Per-process state
struct proc {
uint sz; // Size of process memory (bytes)
char *kstack; // Bottom of kernel stack for this process, must be first entry
uint64 sz; // Size of process memory (bytes)
pde_t* pgdir; // Page table
char *kstack; // Bottom of kernel stack for this process
enum procstate state; // Process state
int pid; // Process ID
struct proc *parent; // Parent process

10
spinlock.c
View file

@ -69,17 +69,17 @@ release(struct spinlock *lk)
// Record the current call stack in pcs[] by following the %ebp chain.
void
getcallerpcs(void *v, uint pcs[])
getcallerpcs(void *v, uint64 pcs[])
{
uint *ebp;
uint64 *ebp;
int i;
ebp = (uint*)v - 2;
asm volatile("mov %%rbp, %0" : "=r" (ebp));
for(i = 0; i < 10; i++){
if(ebp == 0 || ebp < (uint*)KERNBASE || ebp == (uint*)0xffffffff)
if(ebp == 0 || ebp < (uint64*)KERNBASE || ebp == (uint64*)0xffffffff)
break;
pcs[i] = ebp[1]; // saved %eip
ebp = (uint*)ebp[0]; // saved %ebp
ebp = (uint64*)ebp[0]; // saved %ebp
}
for(; i < 10; i++)
pcs[i] = 0;

2
spinlock.h
View file

@ -5,7 +5,7 @@ struct spinlock {
// For debugging:
char *name; // Name of lock.
struct cpu *cpu; // The cpu holding the lock.
uint pcs[10]; // The call stack (an array of program counters)
uint64 pcs[10]; // The call stack (an array of program counters)
// that locked the lock.
};

2
string.c
View file

@ -4,7 +4,7 @@
void*
memset(void *dst, int c, uint n)
{
if ((int)dst%4 == 0 && n%4 == 0){
if ((uint64)dst%4 == 0 && n%4 == 0){
c &= 0xFF;
stosl(dst, (c<<24)|(c<<16)|(c<<8)|c, n/4);
} else

36
swtch.S
View file

@ -8,22 +8,28 @@
.globl swtch
swtch:
movl 4(%esp), %eax
movl 8(%esp), %edx
# Save old callee-saved registers
pushl %ebp
pushl %ebx
pushl %esi
pushl %edi
# Save old callee-save registers
push %rbp
push %rbx
push %r11
push %r12
push %r13
push %r14
push %r15
# Switch stacks
movl %esp, (%eax)
movl %edx, %esp
mov %rsp, (%rdi) # first arg is in rdi
mov %rsi, %rsp # second arg is in rsi
# Load new callee-save registers
pop %r15
pop %r14
pop %r13
pop %r12
pop %r11
pop %rbx
pop %rbp
# Load new callee-saved registers
popl %edi
popl %esi
popl %ebx
popl %ebp
ret

58
syscall.c
View file

@ -15,13 +15,13 @@
// Fetch the int at addr from the current process.
int
fetchint(uint addr, int *ip)
fetchint(uint64 addr, int *ip)
{
struct proc *curproc = myproc();
if(addr >= curproc->sz || addr+4 > curproc->sz)
return -1;
*ip = *(int*)(addr);
*ip = *(uint64*)(addr);
return 0;
}
@ -29,7 +29,7 @@ fetchint(uint addr, int *ip)
// Doesn't actually copy the string - just sets *pp to point at it.
// Returns length of string, not including nul.
int
fetchstr(uint addr, char **pp)
fetchstr(uint64 addr, char **pp)
{
char *s, *ep;
struct proc *curproc = myproc();
@ -45,11 +45,51 @@ fetchstr(uint addr, char **pp)
return -1;
}
static uint64
fetcharg(int n)
{
struct proc *curproc = myproc();
switch (n) {
case 0:
return curproc->tf->rdi;
case 1:
return curproc->tf->rsi;
case 2:
return curproc->tf->rdx;
case 3:
return curproc->tf->r10;
case 4:
return curproc->tf->r8;
case 5:
return curproc->tf->r9;
}
panic("fetcharg");
return -1;
}
int
fetchaddr(uint64 addr, uint64 *ip)
{
struct proc *curproc = myproc();
if(addr >= curproc->sz || addr+sizeof(uint64) > curproc->sz)
return -1;
*ip = *(uint64*)(addr);
return 0;
}
// Fetch the nth 32-bit system call argument.
int
argint(int n, int *ip)
{
return fetchint((myproc()->tf->esp) + 4 + 4*n, ip);
*ip = fetcharg(n);
return 0;
}
int
argaddr(int n, uint64 *ip)
{
*ip = fetcharg(n);
return 0;
}
// Fetch the nth word-sized system call argument as a pointer
@ -58,10 +98,10 @@ argint(int n, int *ip)
int
argptr(int n, char **pp, int size)
{
int i;
uint64 i;
struct proc *curproc = myproc();
if(argint(n, &i) < 0)
if(argaddr(n, &i) < 0)
return -1;
if(size < 0 || (uint)i >= curproc->sz || (uint)i+size > curproc->sz)
return -1;
@ -134,12 +174,12 @@ syscall(void)
int num;
struct proc *curproc = myproc();
num = curproc->tf->eax;
num = curproc->tf->rax;
if(num > 0 && num < NELEM(syscalls) && syscalls[num]) {
curproc->tf->eax = syscalls[num]();
curproc->tf->rax = syscalls[num]();
} else {
cprintf("%d %s: unknown sys call %d\n",
curproc->pid, curproc->name, num);
curproc->tf->eax = -1;
curproc->tf->rax = -1;
}
}

6
sysfile.c
View file

@ -399,16 +399,16 @@ sys_exec(void)
{
char *path, *argv[MAXARG];
int i;
uint uargv, uarg;
uint64 uargv, uarg;
if(argstr(0, &path) < 0 || argint(1, (int*)&uargv) < 0){
if(argstr(0, &path) < 0 || argaddr(1, &uargv) < 0){
return -1;
}
memset(argv, 0, sizeof(argv));
for(i=0;; i++){
if(i >= NELEM(argv))
return -1;
if(fetchint(uargv+4*i, (int*)&uarg) < 0)
if(fetchaddr(uargv+sizeof(uint64)*i, (uint64*)&uarg) < 0)
return -1;
if(uarg == 0){
argv[i] = 0;

25
trap.c
View file

@ -9,8 +9,8 @@
#include "spinlock.h"
// Interrupt descriptor table (shared by all CPUs).
struct gatedesc idt[256];
extern uint vectors[]; // in vectors.S: array of 256 entry pointers
struct intgate idt[256];
extern uint64 vectors[]; // in vectors.S: array of 256 entry pointers
struct spinlock tickslock;
uint ticks;
@ -19,9 +19,10 @@ tvinit(void)
{
int i;
for(i = 0; i < 256; i++)
SETGATE(idt[i], 0, SEG_KCODE<<3, vectors[i], 0);
SETGATE(idt[T_SYSCALL], 1, SEG_KCODE<<3, vectors[T_SYSCALL], DPL_USER);
for(i=0; i<256; i++) {
idt[i] = INTDESC(KCSEG, vectors[i], INT_P | SEG_INTR64);
}
idtinit();
initlock(&tickslock, "time");
}
@ -29,7 +30,11 @@ tvinit(void)
void
idtinit(void)
{
lidt(idt, sizeof(idt));
struct desctr dtr;
dtr.limit = sizeof(idt) - 1;
dtr.base = (uint64)idt;
lidt((void *)&dtr.limit);
}
//PAGEBREAK: 41
@ -74,7 +79,7 @@ trap(struct trapframe *tf)
case T_IRQ0 + 7:
case T_IRQ0 + IRQ_SPURIOUS:
cprintf("cpu%d: spurious interrupt at %x:%x\n",
cpuid(), tf->cs, tf->eip);
cpuid(), tf->cs, tf->rip);
lapiceoi();
break;
@ -83,14 +88,14 @@ trap(struct trapframe *tf)
if(myproc() == 0 || (tf->cs&3) == 0){
// In kernel, it must be our mistake.
cprintf("unexpected trap %d from cpu %d eip %x (cr2=0x%x)\n",
tf->trapno, cpuid(), tf->eip, rcr2());
tf->trapno, cpuid(), tf->rip, rcr2());
panic("trap");
}
// In user space, assume process misbehaved.
cprintf("pid %d %s: trap %d err %d on cpu %d "
"eip 0x%x addr 0x%x--kill proc\n",
myproc()->pid, myproc()->name, tf->trapno,
tf->err, cpuid(), tf->eip, rcr2());
tf->err, cpuid(), tf->rip, rcr2());
myproc()->killed = 1;
}
@ -110,3 +115,5 @@ trap(struct trapframe *tf)
if(myproc() && myproc()->killed && (tf->cs&3) == DPL_USER)
exit();
}

142
trapasm.S
View file

@ -1,32 +1,136 @@
#include "param.h"
#include "x86.h"
#include "mmu.h"
# vectors.S sends all traps here.
.globl alltraps
alltraps:
# Build trap frame.
pushl %ds
pushl %es
pushl %fs
pushl %gs
pushal
push %r15
push %r14
push %r13
push %r12
push %r11
push %r10
push %r9
push %r8
push %rdi
push %rsi
push %rbp
push %rdx
push %rcx
push %rbx
push %rax
# Set up data segments.
movw $(SEG_KDATA<<3), %ax
movw %ax, %ds
movw %ax, %es
cmpw $KCSEG, 32(%rsp) # compare to saved cs
jz 1f
swapgs
# Call trap(tf), where tf=%esp
pushl %esp
1:mov %rsp, %rdi # frame in arg1
call trap
addl $4, %esp
# Return falls through to trapret...
.globl trapret
trapret:
popal
popl %gs
popl %fs
popl %es
popl %ds
addl $0x8, %esp # trapno and errcode
iret
cli
cmpw $KCSEG, 32(%rsp) # compare to saved cs
jz 1f
swapgs
1:pop %rax
pop %rbx
pop %rcx
pop %rdx
pop %rbp
pop %rsi
pop %rdi
pop %r8
pop %r9
pop %r10
pop %r11
pop %r12
pop %r13
pop %r14
pop %r15
add $16, %rsp # discard trapnum and errorcode
iretq
#PAGEBREAK!
# syscall_entry jumps here after syscall instruction
.globl sysentry
sysentry: # Build trap frame.
// load kernel stack address
swapgs
movq %rax, %gs:0 // save %rax in syscallno of cpu entry
movq %rsp, %gs:8 // user sp
movq %gs:16, %rax // proc entry
movq %ss:0(%rax), %rax // load kstack from proc
addq $(KSTACKSIZE), %rax
movq %rax, %rsp
movq %gs:0, %rax // restore rax
// push usp
push $0
push %gs:8
// safe eflags and eip
push %r11
push $UCSEG
push %rcx
// push errno and trapno to make stack look like a trap
push $0
push $64
// push values on kernel stack
push %r15
push %r14
push %r13
push %r12
push %r11
push %r10
push %r9
push %r8
push %rdi
push %rsi
push %rbp
push %rdx
push %rcx
push %rbx
push %rax
mov %rsp, %rdi # frame in arg1
call trap
#PAGEBREAK!
# Return falls through to trapret...
.globl sysexit
sysexit:
# to make sure we don't get any interrupts on the user stack while in
# supervisor mode. insufficient? (see vunerability reports for sysret)
cli
pop %rax
pop %rbx
pop %rcx
pop %rdx
pop %rbp
pop %rsi
pop %rdi
pop %r8
pop %r9
pop %r10
pop %r11
pop %r12
pop %r13
pop %r14
pop %r15
add $(5*8), %rsp # discard trapnum, errorcode, rip, cs and rflags
mov (%rsp),%rsp # switch to the user stack
swapgs
sysretq

1
traps.h
View file

@ -36,3 +36,4 @@
#define IRQ_ERROR 19
#define IRQ_SPURIOUS 31

8
types.h
View file

@ -1,4 +1,10 @@
typedef unsigned int uint;
typedef unsigned short ushort;
typedef unsigned char uchar;
typedef uint pde_t;
typedef unsigned char uint8;
typedef unsigned short uint16;
typedef unsigned int uint32;
typedef unsigned long uint64;
typedef uint64 pde_t;

36
usertests.c
View file

@ -363,17 +363,29 @@ preempt(void)
printf(1, "preempt: ");
pid1 = fork();
if(pid1 < 0) {
printf(1, "fork failed");
exit();
}
if(pid1 == 0)
for(;;)
;
pid2 = fork();
if(pid2 < 0) {
printf(1, "fork failed\n");
exit();
}
if(pid2 == 0)
for(;;)
;
pipe(pfds);
pid3 = fork();
if(pid3 < 0) {
printf(1, "fork failed\n");
exit();
}
if(pid3 == 0){
close(pfds[0]);
if(write(pfds[1], "x", 1) != 1)
@ -1391,6 +1403,11 @@ forktest(void)
exit();
}
if (n == 0) {
printf(1, "no fork at all!\n");
exit();
}
if(n == 1000){
printf(1, "fork claimed to work 1000 times!\n");
exit();
@ -1414,16 +1431,16 @@ forktest(void)
void
sbrktest(void)
{
int fds[2], pid, pids[10], ppid;
char *a, *b, *c, *lastaddr, *oldbrk, *p, scratch;
uint amt;
int i, fds[2], pids[10], pid, ppid;
char *c, *oldbrk, scratch, *a, *b, *lastaddr, *p;
uint64 amt;
#define BIG (100*1024*1024)
printf(stdout, "sbrk test\n");
oldbrk = sbrk(0);
// can one sbrk() less than a page?
a = sbrk(0);
int i;
for(i = 0; i < 5000; i++){
b = sbrk(1);
if(b != a){
@ -1449,9 +1466,8 @@ sbrktest(void)
wait();
// can one grow address space to something big?
#define BIG (100*1024*1024)
a = sbrk(0);
amt = (BIG) - (uint)a;
amt = (BIG) - (uint64)a;
p = sbrk(amt);
if (p != a) {
printf(stdout, "sbrk test failed to grow big address space; enough phys mem?\n");
@ -1518,7 +1534,7 @@ sbrktest(void)
for(i = 0; i < sizeof(pids)/sizeof(pids[0]); i++){
if((pids[i] = fork()) == 0){
// allocate a lot of memory
sbrk(BIG - (uint)sbrk(0));
sbrk(BIG - (uint64)sbrk(0));
write(fds[1], "x", 1);
// sit around until killed
for(;;) sleep(1000);
@ -1526,6 +1542,7 @@ sbrktest(void)
if(pids[i] != -1)
read(fds[0], &scratch, 1);
}
// if those failed allocations freed up the pages they did allocate,
// we'll be able to allocate here
c = sbrk(4096);
@ -1549,7 +1566,7 @@ sbrktest(void)
void
validateint(int *p)
{
int res;
/* XXX int res;
asm("mov %%esp, %%ebx\n\t"
"mov %3, %%esp\n\t"
"int %2\n\t"
@ -1557,13 +1574,14 @@ validateint(int *p)
"=a" (res) :
"a" (SYS_sleep), "n" (T_SYSCALL), "c" (p) :
"ebx");
*/
}
void
validatetest(void)
{
int hi, pid;
uint p;
uint64 p;
printf(stdout, "validate test\n");
hi = 1100*1024;

2
usys.S
View file

@ -5,7 +5,7 @@
.globl name; \
name: \
movl $SYS_ ## name, %eax; \
int $T_SYSCALL; \
syscall; \
ret
SYSCALL(fork)

16
vectors.pl
View file

@ -12,9 +12,9 @@ for(my $i = 0; $i < 256; $i++){
print ".globl vector$i\n";
print "vector$i:\n";
if(!($i == 8 || ($i >= 10 && $i <= 14) || $i == 17)){
print " pushl \$0\n";
print " push \$0\n";
}
print " pushl \$$i\n";
print " push \$$i\n";
print " jmp alltraps\n";
}
@ -23,7 +23,7 @@ print ".data\n";
print ".globl vectors\n";
print "vectors:\n";
for(my $i = 0; $i < 256; $i++){
print " .long vector$i\n";
print " .quad vector$i\n";
}
# sample output:
@ -31,8 +31,8 @@ for(my $i = 0; $i < 256; $i++){
# .globl alltraps
# .globl vector0
# vector0:
# pushl $0
# pushl $0
# push $0
# push $0
# jmp alltraps
# ...
#
@ -40,8 +40,8 @@ for(my $i = 0; $i < 256; $i++){
# .data
# .globl vectors
# vectors:
# .long vector0
# .long vector1
# .long vector2
# .quad vector0
# .quad vector1
# .quad vector2
# ...

211
vm.c
View file

@ -2,13 +2,34 @@
#include "types.h"
#include "defs.h"
#include "x86.h"
#include "msr.h"
#include "memlayout.h"
#include "mmu.h"
#include "proc.h"
#include "elf.h"
#include "traps.h"
extern char data[]; // defined by kernel.ld
pde_t *kpgdir; // for use in scheduler()
void sysentry(void);
static pde_t *kpml4; // kernel address space, used by scheduler and bootup
// Bootstrap GDT. Used by boot.S but defined in C
// Map "logical" addresses to virtual addresses using identity map.
// Cannot share a CODE descriptor for both kernel and user
// because it would have to have DPL_USR, but the CPU forbids
// an interrupt from CPL=0 to DPL=3.
struct segdesc bootgdt[NSEGS] = {
[0] = SEGDESC(0, 0, 0), // null
[1] = SEGDESC(0, 0xfffff, SEG_R|SEG_CODE|SEG_S|SEG_DPL(0)|SEG_P|SEG_D|SEG_G), // 32-bit kernel code
[2] = SEGDESC(0, 0, SEG_R|SEG_CODE|SEG_S|SEG_DPL(0)|SEG_P|SEG_L|SEG_G), // 64-bit kernel code
[3] = SEGDESC(0, 0xfffff, SEG_W|SEG_S|SEG_DPL(0)|SEG_P|SEG_D|SEG_G), // kernel data
// The order of the user data and user code segments is
// important for syscall instructions. See initseg.
[6] = SEGDESC(0, 0xfffff, SEG_W|SEG_S|SEG_DPL(3)|SEG_P|SEG_D|SEG_G), // 64-bit user data
[7] = SEGDESC(0, 0, SEG_R|SEG_CODE|SEG_S|SEG_DPL(3)|SEG_P|SEG_L|SEG_G), // 64-bit user code
};
// Set up CPU's kernel segment descriptors.
// Run once on entry on each CPU.
@ -16,41 +37,82 @@ void
seginit(void)
{
struct cpu *c;
struct desctr dtr;
// Map "logical" addresses to virtual addresses using identity map.
// Cannot share a CODE descriptor for both kernel and user
// because it would have to have DPL_USR, but the CPU forbids
// an interrupt from CPL=0 to DPL=3.
c = &cpus[cpuid()];
c->gdt[SEG_KCODE] = SEG(STA_X|STA_R, 0, 0xffffffff, 0);
c->gdt[SEG_KDATA] = SEG(STA_W, 0, 0xffffffff, 0);
c->gdt[SEG_UCODE] = SEG(STA_X|STA_R, 0, 0xffffffff, DPL_USER);
c->gdt[SEG_UDATA] = SEG(STA_W, 0, 0xffffffff, DPL_USER);
lgdt(c->gdt, sizeof(c->gdt));
c = mycpu();
memmove(c->gdt, bootgdt, sizeof bootgdt);
dtr.limit = sizeof(c->gdt)-1;
dtr.base = (uint64) c->gdt;
lgdt((void *)&dtr.limit);
// When executing a syscall instruction the CPU sets the SS selector
// to (star >> 32) + 8 and the CS selector to (star >> 32).
// When executing a sysret instruction the CPU sets the SS selector
// to (star >> 48) + 8 and the CS selector to (star >> 48) + 16.
uint64 star = ((((uint64)UCSEG|0x3)- 16)<<48)|((uint64)(KCSEG)<<32);
writemsr(MSR_STAR, star);
writemsr(MSR_LSTAR, (uint64)&sysentry);
writemsr(MSR_SFMASK, FL_TF | FL_IF);
// Initialize cpu-local storage.
writegs(KDSEG);
writemsr(MSR_GS_BASE, (uint64)c);
writemsr(MSR_GS_KERNBASE, (uint64)c);
}
// Return the address of the PTE in page table pgdir
// that corresponds to virtual address va. If alloc!=0,
// create any required page table pages.
static pte_t *
walkpgdir(pde_t *pgdir, const void *va, int alloc)
walkpgdir(pde_t *pml4, const void *va, int alloc)
{
pml4e_t *pml4e;
pdpe_t *pdp;
pdpe_t *pdpe;
pde_t *pde;
pde_t *pd;
pte_t *pgtab;
pde = &pgdir[PDX(va)];
if(*pde & PTE_P){
pgtab = (pte_t*)P2V(PTE_ADDR(*pde));
} else {
if(!alloc || (pgtab = (pte_t*)kalloc()) == 0)
// level 4
pml4e = &pml4[PMX(va)];
if(*pml4e & PTE_P)
pdp = (pdpe_t*)P2V(PTE_ADDR(*pml4e));
else {
if(!alloc || (pdp = (pdpe_t*)kalloc()) == 0)
return 0;
// Make sure all those PTE_P bits are zero.
memset(pgtab, 0, PGSIZE);
memset(pdp, 0, PGSIZE);
// The permissions here are overly generous, but they can
// be further restricted by the permissions in the page table
// entries, if necessary.
*pml4e = V2P(pdp) | PTE_P | PTE_W | PTE_U;
}
// XXX avoid repetition
// level 3
pdpe = &pdp[PDPX(va)];
if(*pdpe & PTE_P)
pd = (pde_t*)P2V(PTE_ADDR(*pdpe));
else {
if(!alloc || (pd = (pde_t*)kalloc()) == 0)
return 0;
memset(pd, 0, PGSIZE);
*pdpe = V2P(pd) | PTE_P | PTE_W | PTE_U;
}
// level 2
pde = &pd[PDX(va)];
if(*pde & PTE_P)
pgtab = (pte_t*)P2V(PTE_ADDR(*pde));
else {
if(!alloc || (pgtab = (pte_t*)kalloc()) == 0)
return 0;
memset(pgtab, 0, PGSIZE);
*pde = V2P(pgtab) | PTE_P | PTE_W | PTE_U;
}
// level 1
return &pgtab[PTX(va)];
}
@ -58,13 +120,13 @@ walkpgdir(pde_t *pgdir, const void *va, int alloc)
// physical addresses starting at pa. va and size might not
// be page-aligned.
static int
mappages(pde_t *pgdir, void *va, uint size, uint pa, int perm)
mappages(pde_t *pgdir, void *va, uint64 size, uint64 pa, int perm)
{
char *a, *last;
pte_t *pte;
a = (char*)PGROUNDDOWN((uint)va);
last = (char*)PGROUNDDOWN(((uint)va) + size - 1);
a = (char*)PGROUNDDOWN((uint64)va);
last = (char*)PGROUNDDOWN(((uint64)va) + size - 1);
for(;;){
if((pte = walkpgdir(pgdir, a, 1)) == 0)
return -1;
@ -80,7 +142,7 @@ mappages(pde_t *pgdir, void *va, uint size, uint pa, int perm)
}
// There is one page table per process, plus one that's used when
// a CPU is not running any process (kpgdir). The kernel uses the
// a CPU is not running any process (kpml4). The kernel uses the
// current process's page table during system calls and interrupts;
// page protection bits prevent user code from using the kernel's
// mappings.
@ -104,35 +166,36 @@ mappages(pde_t *pgdir, void *va, uint size, uint pa, int perm)
// every process's page table.
static struct kmap {
void *virt;
uint phys_start;
uint phys_end;
uint64 phys_start;
uint64 phys_end;
int perm;
} kmap[] = {
{ (void*)KERNBASE, 0, EXTMEM, PTE_W}, // I/O space
{ (void*)KERNLINK, V2P(KERNLINK), V2P(data), 0}, // kern text+rodata
{ (void*)data, V2P(data), PHYSTOP, PTE_W}, // kern data+memory
{ (void*)DEVSPACE, DEVSPACE, 0, PTE_W}, // more devices
{ (void*)P2V(DEVSPACE), DEVSPACE, DEVSPACETOP, PTE_W}, // more devices
};
// Set up kernel part of a page table.
pde_t*
setupkvm(void)
{
pde_t *pgdir;
pde_t *pml4;
struct kmap *k;
if((pgdir = (pde_t*)kalloc()) == 0)
if((pml4 = (pde_t*)kalloc()) == 0)
return 0;
memset(pgdir, 0, PGSIZE);
if (P2V(PHYSTOP) > (void*)DEVSPACE)
memset(pml4, 0, PGSIZE);
if (PHYSTOP > DEVSPACE)
panic("PHYSTOP too high");
for(k = kmap; k < &kmap[NELEM(kmap)]; k++)
if(mappages(pgdir, k->virt, k->phys_end - k->phys_start,
for(k = kmap; k < &kmap[NELEM(kmap)]; k++) {
if(mappages(pml4, k->virt, k->phys_end - k->phys_start,
(uint)k->phys_start, k->perm) < 0) {
freevm(pgdir);
freevm(pml4, 0);
return 0;
}
return pgdir;
}
return pml4;
}
// Allocate one page table for the machine for the kernel address
@ -140,7 +203,7 @@ setupkvm(void)
void
kvmalloc(void)
{
kpgdir = setupkvm();
kpml4 = setupkvm();
switchkvm();
}
@ -149,13 +212,17 @@ kvmalloc(void)
void
switchkvm(void)
{
lcr3(V2P(kpgdir)); // switch to the kernel page table
lcr3(V2P(kpml4)); // switch to the kernel page table
}
// Switch TSS and h/w page table to correspond to process p.
void
switchuvm(struct proc *p)
{
struct desctr dtr;
struct cpu *c;
if(p == 0)
panic("switchuvm: no process");
if(p->kstack == 0)
@ -164,16 +231,22 @@ switchuvm(struct proc *p)
panic("switchuvm: no pgdir");
pushcli();
mycpu()->gdt[SEG_TSS] = SEG16(STS_T32A, &mycpu()->ts,
sizeof(mycpu()->ts)-1, 0);
mycpu()->gdt[SEG_TSS].s = 0;
mycpu()->ts.ss0 = SEG_KDATA << 3;
mycpu()->ts.esp0 = (uint)p->kstack + KSTACKSIZE;
// setting IOPL=0 in eflags *and* iomb beyond the tss segment limit
// forbids I/O instructions (e.g., inb and outb) from user space
mycpu()->ts.iomb = (ushort) 0xFFFF;
ltr(SEG_TSS << 3);
c = mycpu();
uint64 base = (uint64) &(c->ts);
c->gdt[TSSSEG>>3] = SEGDESC(base, (sizeof(c->ts)-1), SEG_P|SEG_TSS64A);
c->gdt[(TSSSEG>>3)+1] = SEGDESCHI(base);
c->ts.rsp[0] = (uint64) p->kstack + KSTACKSIZE;
c->ts.iomba = (ushort) 0xFFFF;
dtr.limit = sizeof(c->gdt) - 1;
dtr.base = (uint64)c->gdt;
lgdt((void *)&dtr.limit);
ltr(TSSSEG);
lcr3(V2P(p->pgdir)); // switch to process's address space
popcli();
}
@ -197,10 +270,11 @@ inituvm(pde_t *pgdir, char *init, uint sz)
int
loaduvm(pde_t *pgdir, char *addr, struct inode *ip, uint offset, uint sz)
{
uint i, pa, n;
uint i, n;
uint64 pa;
pte_t *pte;
if((uint) addr % PGSIZE != 0)
if((uint64) addr % PGSIZE != 0)
panic("loaduvm: addr must be page aligned");
for(i = 0; i < sz; i += PGSIZE){
if((pte = walkpgdir(pgdir, addr+i, 0)) == 0)
@ -222,7 +296,7 @@ int
allocuvm(pde_t *pgdir, uint oldsz, uint newsz)
{
char *mem;
uint a;
uint64 a;
if(newsz >= KERNBASE)
return 0;
@ -233,13 +307,11 @@ allocuvm(pde_t *pgdir, uint oldsz, uint newsz)
for(; a < newsz; a += PGSIZE){
mem = kalloc();
if(mem == 0){
cprintf("allocuvm out of memory\n");
deallocuvm(pgdir, newsz, oldsz);
return 0;
}
memset(mem, 0, PGSIZE);
if(mappages(pgdir, (char*)a, PGSIZE, V2P(mem), PTE_W|PTE_U) < 0){
cprintf("allocuvm out of memory (2)\n");
deallocuvm(pgdir, newsz, oldsz);
kfree(mem);
return 0;
@ -253,10 +325,10 @@ allocuvm(pde_t *pgdir, uint oldsz, uint newsz)
// need to be less than oldsz. oldsz can be larger than the actual
// process size. Returns the new process size.
int
deallocuvm(pde_t *pgdir, uint oldsz, uint newsz)
deallocuvm(pde_t *pgdir, uint64 oldsz, uint64 newsz)
{
pte_t *pte;
uint a, pa;
uint64 a, pa;
if(newsz >= oldsz)
return oldsz;
@ -281,20 +353,34 @@ deallocuvm(pde_t *pgdir, uint oldsz, uint newsz)
// Free a page table and all the physical memory pages
// in the user part.
void
freevm(pde_t *pgdir)
freevm(pde_t *pml4, uint64 sz)
{
uint i;
uint i, j, k;
pde_t *pdp, *pd, *pt;
if(pgdir == 0)
if(pml4 == 0)
panic("freevm: no pgdir");
deallocuvm(pgdir, KERNBASE, 0);
deallocuvm(pml4, sz, 0);
for(i = 0; i < NPDENTRIES; i++){
if(pgdir[i] & PTE_P){
char * v = P2V(PTE_ADDR(pgdir[i]));
kfree(v);
if(pml4[i] & PTE_P){
pdp = (pdpe_t*)P2V(PTE_ADDR(pml4[i]));
for(j = 0; j < NPDENTRIES; j++){
if(pdp[j] & PTE_P){
pd = (pde_t*)P2V(PTE_ADDR(pdp[j]));
for(k = 0; k < NPDENTRIES; k++){
if(pd[k] & PTE_P) {
pt = (pde_t*)P2V(PTE_ADDR(pd[k]));
kfree((char*)pt);
}
}
kfree((char*)pgdir);
kfree((char*)pd);
}
}
kfree((char*)pdp);
}
}
kfree((char*)pml4);
}
// Clear PTE_U on a page. Used to create an inaccessible
@ -317,7 +403,8 @@ copyuvm(pde_t *pgdir, uint sz)
{
pde_t *d;
pte_t *pte;
uint pa, i, flags;
uint64 pa, i;
uint flags;
char *mem;
if((d = setupkvm()) == 0)
@ -340,7 +427,7 @@ copyuvm(pde_t *pgdir, uint sz)
return d;
bad:
freevm(d);
freevm(d, sz);
return 0;
}
@ -366,7 +453,7 @@ int
copyout(pde_t *pgdir, uint va, void *p, uint len)
{
char *buf, *pa0;
uint n, va0;
uint64 n, va0;
buf = (char*)p;
while(len > 0){

104
x86.h
View file

@ -1,5 +1,7 @@
// Routines to let C code use special x86 instructions.
#ifndef __ASSEMBLER__
static inline uchar
inb(ushort port)
{
@ -57,32 +59,16 @@ stosl(void *addr, int data, int cnt)
"memory", "cc");
}
struct segdesc;
static inline void
lgdt(struct segdesc *p, int size)
lgdt(void *p)
{
volatile ushort pd[3];
pd[0] = size-1;
pd[1] = (uint)p;
pd[2] = (uint)p >> 16;
asm volatile("lgdt (%0)" : : "r" (pd));
asm volatile("lgdt (%0)" : : "r" (p) : "memory");
}
struct gatedesc;
static inline void
lidt(struct gatedesc *p, int size)
lidt(void *p)
{
volatile ushort pd[3];
pd[0] = size-1;
pd[1] = (uint)p;
pd[2] = (uint)p >> 16;
asm volatile("lidt (%0)" : : "r" (pd));
asm volatile("lidt (%0)" : : "r" (p) : "memory");
}
static inline void
@ -91,11 +77,11 @@ ltr(ushort sel)
asm volatile("ltr %0" : : "r" (sel));
}
static inline uint
static inline uint64
readeflags(void)
{
uint eflags;
asm volatile("pushfl; popl %0" : "=r" (eflags));
uint64 eflags;
asm volatile("pushf; pop %0" : "=r" (eflags));
return eflags;
}
@ -133,51 +119,53 @@ xchg(volatile uint *addr, uint newval)
static inline uint
rcr2(void)
{
uint val;
asm volatile("movl %%cr2,%0" : "=r" (val));
uint64 val;
asm volatile("mov %%cr2,%0" : "=r" (val));
return val;
}
static inline void
lcr3(uint val)
lcr3(uint64 val)
{
asm volatile("movl %0,%%cr3" : : "r" (val));
asm volatile("mov %0,%%cr3" : : "r" (val));
}
static inline void
writegs(uint16 v)
{
__asm volatile("movw %0, %%gs" : : "r" (v));
}
//PAGEBREAK: 36
// Layout of the trap frame built on the stack by the
// hardware and by trapasm.S, and passed to trap().
struct trapframe {
// registers as pushed by pusha
uint edi;
uint esi;
uint ebp;
uint oesp; // useless & ignored
uint ebx;
uint edx;
uint ecx;
uint eax;
uint64 rax;
uint64 rbx;
uint64 rcx;
uint64 rdx;
uint64 rbp;
uint64 rsi;
uint64 rdi;
uint64 r8;
uint64 r9;
uint64 r10;
uint64 r11;
uint64 r12;
uint64 r13;
uint64 r14;
uint64 r15;
uint64 trapno;
uint64 err;
uint64 rip;
uint16 cs;
uint16 padding[3];
uint64 rflags;
uint64 rsp;
uint64 ss;
}__attribute__((packed));
// rest of trap frame
ushort gs;
ushort padding1;
ushort fs;
ushort padding2;
ushort es;
ushort padding3;
ushort ds;
ushort padding4;
uint trapno;
#endif
// below here defined by x86 hardware
uint err;
uint eip;
ushort cs;
ushort padding5;
uint eflags;
// below here only when crossing rings, such as from user to kernel
uint esp;
ushort ss;
ushort padding6;
};
#define TF_CS 144 // offset in trapframe for saved cs