// // virtio device definitions. // for both the mmio interface, and virtio descriptors. // only tested with qemu. // this is the "legacy" virtio interface. // // the virtio spec: // https://docs.oasis-open.org/virtio/virtio/v1.1/virtio-v1.1.pdf // // virtio mmio control registers, mapped starting at 0x10001000. // from qemu virtio_mmio.h #define VIRTIO_MMIO_MAGIC_VALUE 0x000 // 0x74726976 #define VIRTIO_MMIO_VERSION 0x004 // version; 1 is legacy #define VIRTIO_MMIO_DEVICE_ID 0x008 // device type; 1 is net, 2 is disk #define VIRTIO_MMIO_VENDOR_ID 0x00c // 0x554d4551 #define VIRTIO_MMIO_DEVICE_FEATURES 0x010 #define VIRTIO_MMIO_DRIVER_FEATURES 0x020 #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 // page size for PFN, write-only #define VIRTIO_MMIO_QUEUE_SEL 0x030 // select queue, write-only #define VIRTIO_MMIO_QUEUE_NUM_MAX 0x034 // max size of current queue, read-only #define VIRTIO_MMIO_QUEUE_NUM 0x038 // size of current queue, write-only #define VIRTIO_MMIO_QUEUE_ALIGN 0x03c // used ring alignment, write-only #define VIRTIO_MMIO_QUEUE_PFN 0x040 // physical page number for queue, read/write #define VIRTIO_MMIO_QUEUE_READY 0x044 // ready bit #define VIRTIO_MMIO_QUEUE_NOTIFY 0x050 // write-only #define VIRTIO_MMIO_INTERRUPT_STATUS 0x060 // read-only #define VIRTIO_MMIO_INTERRUPT_ACK 0x064 // write-only #define VIRTIO_MMIO_STATUS 0x070 // read/write // status register bits, from qemu virtio_config.h #define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 #define VIRTIO_CONFIG_S_DRIVER 2 #define VIRTIO_CONFIG_S_DRIVER_OK 4 #define VIRTIO_CONFIG_S_FEATURES_OK 8 // device feature bits #define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ #define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ #define VIRTIO_F_ANY_LAYOUT 27 #define VIRTIO_RING_F_INDIRECT_DESC 28 #define VIRTIO_RING_F_EVENT_IDX 29 // this many virtio descriptors. // must be a power of two. #define NUM 8 struct VRingDesc { uint64 addr; uint32 len; uint16 flags; uint16 next; }; #define VRING_DESC_F_NEXT 1 // chained with another descriptor #define VRING_DESC_F_WRITE 2 // device writes (vs read) struct VRingUsedElem { uint32 id; // index of start of completed descriptor chain uint32 len; }; // for disk ops #define VIRTIO_BLK_T_IN 0 // read the disk #define VIRTIO_BLK_T_OUT 1 // write the disk struct UsedArea { uint16 flags; uint16 id; struct VRingUsedElem elems[NUM]; };