81 lines
2.9 KiB
ArmAsm
81 lines
2.9 KiB
ArmAsm
#include "asm.h"
|
|
|
|
/*
|
|
* Start an Application Processor. This must be placed on a 4KB boundary
|
|
* somewhere in the 1st MB of conventional memory (APBOOTSTRAP). However,
|
|
* due to some shortcuts below it's restricted further to within the 1st
|
|
* 64KB. The AP starts in real-mode, with
|
|
* CS selector set to the startup memory address/16;
|
|
* CS base set to startup memory address;
|
|
* CS limit set to 64KB;
|
|
* CPL and IP set to 0.
|
|
*
|
|
* mp.c causes each non-boot CPU in turn to jump to start.
|
|
* mp.c puts the correct %esp in start-4, and the place to jump
|
|
* to in start-8.
|
|
*
|
|
* Credit: Cliff Frey and Plan 9
|
|
*/
|
|
|
|
.set PROT_MODE_CSEG,0x8 # code segment selector
|
|
.set PROT_MODE_DSEG,0x10 # data segment selector
|
|
.set CR0_PE_ON,0x1 # protected mode enable flag
|
|
|
|
.globl start
|
|
start: .code16 # This runs in real mode
|
|
cli # Disable interrupts
|
|
cld # String operations increment
|
|
|
|
# Set up the important data segment registers (DS, ES, SS).
|
|
xorw %ax,%ax # Segment number zero
|
|
movw %ax,%ds # -> Data Segment
|
|
movw %ax,%es # -> Extra Segment
|
|
movw %ax,%ss # -> Stack Segment
|
|
|
|
# Set up the stack pointer, growing downward from 0x7000-8.
|
|
movw $start-8,%sp # Stack Pointer
|
|
|
|
#### Switch from real to protected mode
|
|
#### The descriptors in our GDT allow all physical memory to be accessed.
|
|
#### Furthermore, the descriptors have base addresses of 0, so that the
|
|
#### segment translation is a NOP, ie. virtual addresses are identical to
|
|
#### their physical addresses. With this setup, immediately after
|
|
#### enabling protected mode it will still appear to this code
|
|
#### that it is running directly on physical memory with no translation.
|
|
#### This initial NOP-translation setup is required by the processor
|
|
#### to ensure that the transition to protected mode occurs smoothly.
|
|
|
|
lgdt gdtdesc # load GDT -- mandatory in protected mode
|
|
movl %cr0, %eax # turn on protected mode
|
|
orl $CR0_PE_ON, %eax #
|
|
movl %eax, %cr0 #
|
|
### CPU magic: jump to relocation, flush prefetch queue, and reload %cs
|
|
### Has the effect of just jmp to the next instruction, but simultaneous
|
|
### loads CS with $PROT_MODE_CSEG.
|
|
ljmp $PROT_MODE_CSEG, $protcseg
|
|
|
|
#### we are in 32-bit protected mode (hence the .code32)
|
|
.code32
|
|
protcseg:
|
|
# Set up the protected-mode data segment registers
|
|
movw $PROT_MODE_DSEG, %ax # Our data segment selector
|
|
movw %ax, %ds # -> DS: Data Segment
|
|
movw %ax, %es # -> ES: Extra Segment
|
|
movw %ax, %fs # -> FS
|
|
movw %ax, %gs # -> GS
|
|
movw %ax, %ss # -> SS: Stack Segment
|
|
|
|
movl start-8, %eax
|
|
movl start-4, %esp
|
|
jmp *%eax
|
|
|
|
.p2align 2 # force 4 byte alignment
|
|
gdt:
|
|
SEG_NULL # null seg
|
|
SEG(STA_X|STA_R, 0x0, 0xffffffff) # code seg
|
|
SEG(STA_W, 0x0, 0xffffffff) # data seg
|
|
|
|
gdtdesc:
|
|
.word 0x17 # sizeof(gdt) - 1
|
|
.long gdt # address gdt
|