xv6-65oo2/picirq.c
kaashoek f70172129c run without lapic and ioapic, if they are not present
if no lapic available, use 8253pit for clock
now xv6 runs both on qemu (uniprocessor) and bochs (uniprocessor and MP)
2006-09-07 01:37:58 +00:00

79 lines
2.3 KiB
C

#include "types.h"
#include "x86.h"
#include "traps.h"
#include "defs.h"
// I/O Addresses of the two 8259A programmable interrupt controllers
#define IO_PIC1 0x20 // Master (IRQs 0-7)
#define IO_PIC2 0xA0 // Slave (IRQs 8-15)
#define IRQ_SLAVE 2 // IRQ at which slave connects to master
// Current IRQ mask.
// Initial IRQ mask has interrupt 2 enabled (for slave 8259A).
ushort irq_mask_8259A = 0xFFFF & ~(1<<IRQ_SLAVE);
void
irq_setmask_8259A(ushort mask)
{
irq_mask_8259A = mask;
outb(IO_PIC1+1, (char)mask);
outb(IO_PIC2+1, (char)(mask >> 8));
}
// Initialize the 8259A interrupt controllers.
void
pic_init(void)
{
// mask all interrupts
outb(IO_PIC1+1, 0xFF);
outb(IO_PIC2+1, 0xFF);
// Set up master (8259A-1)
// ICW1: 0001g0hi
// g: 0 = edge triggering, 1 = level triggering
// h: 0 = cascaded PICs, 1 = master only
// i: 0 = no ICW4, 1 = ICW4 required
outb(IO_PIC1, 0x11);
// ICW2: Vector offset
outb(IO_PIC1+1, IRQ_OFFSET);
// ICW3: (master PIC) bit mask of IR lines connected to slaves
// (slave PIC) 3-bit # of slave's connection to master
outb(IO_PIC1+1, 1<<IRQ_SLAVE);
// ICW4: 000nbmap
// n: 1 = special fully nested mode
// b: 1 = buffered mode
// m: 0 = slave PIC, 1 = master PIC
// (ignored when b is 0, as the master/slave role
// can be hardwired).
// a: 1 = Automatic EOI mode
// p: 0 = MCS-80/85 mode, 1 = intel x86 mode
outb(IO_PIC1+1, 0x3);
// Set up slave (8259A-2)
outb(IO_PIC2, 0x11); // ICW1
outb(IO_PIC2+1, IRQ_OFFSET + 8); // ICW2
outb(IO_PIC2+1, IRQ_SLAVE); // ICW3
// NB Automatic EOI mode doesn't tend to work on the slave.
// Linux source code says it's "to be investigated".
outb(IO_PIC2+1, 0x3); // ICW4
// OCW3: 0ef01prs
// ef: 0x = NOP, 10 = clear specific mask, 11 = set specific mask
// p: 0 = no polling, 1 = polling mode
// rs: 0x = NOP, 10 = read IRR, 11 = read ISR
outb(IO_PIC1, 0x68); // clear specific mask
outb(IO_PIC1, 0x0a); // read IRR by default
outb(IO_PIC2, 0x68); // OCW3
outb(IO_PIC2, 0x0a); // OCW3
if(irq_mask_8259A != 0xFFFF)
irq_setmask_8259A(irq_mask_8259A);
}