xv6-65oo2/labs/syscall.html
2019-07-26 21:03:59 -04:00

323 lines
9.3 KiB
HTML

<html>
<head>
<title>Lab: system calls</title>
<link rel="stylesheet" href="homework.css" type="text/css" />
</head>
<body>
<h1>Lab: system calls</h1>
This lab makes you familiar with the implementation of system calls.
In particular, you will implement a new system
calls: <tt>sigalarm</tt> and <tt>sigreturn</tt>.
<b>Note: before this lab, it would be good to have recitation section on gdb and understanding assembly</b>
<h2>Warmup: system call tracing</h2>
<p>In this exercise you will modify the xv6 kernel to print out a line
for each system call invocation. It is enough to print the name of the
system call and the return value; you don't need to print the system
call arguments.
<p>
When you're done, you should see output like this when booting
xv6:
<pre>
...
fork -> 2
exec -> 0
open -> 3
close -> 0
$write -> 1
write -> 1
</pre>
<p>
That's init forking and execing sh, sh making sure only two file descriptors are
open, and sh writing the $ prompt. (Note: the output of the shell and the
system call trace are intermixed, because the shell uses the write syscall to
print its output.)
<p> Hint: modify the syscall() function in kernel/syscall.c.
<p>Run the programs you wrote in the lab and inspect the system call
trace. Are there many system calls? Which systems calls correspond
to code in the applications you wrote above?
<p>Optional: print the system call arguments.
<h2>RISC-V assembly</h2>
<p>For the alarm system call it will be important to understand RISC-V
assembly. Since in later labs you will also read and write assembly,
it is important that you familiarize yourself with RISC_V assembly.
<p>Add a file user/call.c with the following content, modify the
Makefile to add the program to the user programs, and compile (make
fs.img). The Makefile also produces a binary and a readable
assembly a version of the program in the file user/call.asm.
<pre>
#include "kernel/param.h"
#include "kernel/types.h"
#include "kernel/stat.h"
#include "user/user.h"
int g(int x) {
return x+3;
}
int f(int x) {
return g(x);
}
void main(void) {
printf(1, "%d %d\n", f(8)+1, 13);
exit();
}
</pre>
<p>Read through call.asm and understand it. The instruction manual
for RISC-V is in the doc directory (doc/riscv-spec-v2.2.pdf). Here
are some questions that you should answer for yourself:
<ul>
<li>Which registers contain arguments to functions? Which
register holds 13 in the call to <tt>printf</tt>? Which register
holds the second one? Which register holds the second one? Etc.
<li>Where is the function call to <tt>f</tt> and <tt>g</tt>
in <tt>main</tt>? (Hint: compiler may inline functions.)
<li>At what address is the function <tt>printf</tt> located?
<li>What value is in the register <tt>ra</tt> in the <tt>jalr</tt>
to <tt>printf</tt> in <tt>main</tt>?
</ul>
<h2>alarm</h2>
<p>
In this exercise you'll add a feature to xv6 that periodically alerts
a process as it uses CPU time. This might be useful for compute-bound
processes that want to limit how much CPU time they chew up, or for
processes that want to compute but also want to take some periodic
action. More generally, you'll be implementing a primitive form of
user-level interrupt/fault handlers; you could use something similar
to handle page faults in the application, for example.
<p>
You should add a new <tt>sigalarm(interval, handler)</tt> system call.
If an application calls <tt>sigalarm(n, fn)</tt>, then after every
<tt>n</tt> "ticks" of CPU time that the program consumes, the kernel
will cause application function
<tt>fn</tt> to be called. When <tt>fn</tt> returns, the application
will resume where it left off. A tick is a fairly arbitrary unit of
time in xv6, determined by how often a hardware timer generates
interrupts.
<p>
You should put the following example program in <tt>user/alarmtest.c</tt>:
<b>XXX Insert the final program here</b>
<pre>
#include "kernel/param.h"
#include "kernel/types.h"
#include "kernel/stat.h"
#include "kernel/riscv.h"
#include "user/user.h"
void test0();
void test1();
void periodic();
int
main(int argc, char *argv[])
{
test0();
test1();
exit();
}
void test0()
{
int i;
printf(1, "test0 start\n");
alarm(2, periodic);
for(i = 0; i < 1000*500000; i++){
if((i % 250000) == 0)
write(2, ".", 1);
}
alarm(0, 0);
printf(1, "test0 done\n");
}
void
periodic()
{
printf(1, "alarm!\n");
}
void __attribute__ ((noinline)) foo(int i, int *j) {
if((i % 2500000) == 0) {
write(2, ".", 1);
}
*j += 1;
}
void test1() {
int i;
int j;
printf(1, "test1 start\n");
j = 0;
alarm(2, periodic);
for(i = 0; i < 1000*500000; i++){
foo(i, &j);
}
if(i != j) {
printf(2, "i %d should = j %d\n", i, j);
exit();
}
printf(1, "test1 done\n");
}
</pre>
The program calls <tt>sigalarm(2, periodic1)</tt> in <tt>test0</tt> to
ask the kernel to force a call to <tt>periodic()</tt> every 2 ticks,
and then spins for a while. After you have implemented
the <tt>sigalarm()</tt> system call in the kernel,
<tt>alarmtest</tt> should produce output like this for <tt>test0</tt>:
<b>Update output for final usertests.c</b>
<pre>
$ alarmtest
alarmtest starting
.....alarm!
....alarm!
.....alarm!
......alarm!
.....alarm!
....alarm!
....alarm!
......alarm!
.....alarm!
...alarm!
...$
</pre>
<p>
<p>
(If you only see one "alarm!", try increasing the number of iterations in
<tt>alarmtest.c</tt> by 10x.)
<p>The main challenge will be to arrange that the handler is invoked
when the process's alarm interval expires. In your usertrap, when a
process's alarm interval expires, you'll want to cause it to execute
its handler. How can you do that? You will need to understand in
details how system calls work (i.e., the code in kernel/trampoline.S
and kernel/trap.c). Which register contains the address where
systems calls return to?
<p>Your solution will be few lines of code, but it will be tricky to
write the right lines of code. Common failure scenarios are: the
user program crashes or doesn't terminate. You can see the assembly
code for the alarmtest program in alarmtest.asm, which will be handy
for debugging.
<h2>Test0: invoke handler</h2>
<p>To get started, the best strategy is to first pass test0, which
will force you to handle the main challenge above. Here are some
hints how to pass test0:
<ul>
<li>You'll need to modify the Makefile to cause <tt>alarmtest.c</tt>
to be compiled as an xv6 user program.
<li>The right declaration to put in <tt>user/user.h</tt> is:
<pre>
int sigalarm(int ticks, void (*handler)());
</pre>
<li>Update kernel/syscall.h and user/usys.S (update usys.pl to update
usys.S) to allow <tt>alarmtest</tt> to invoke the sigalarm system
call.
<li>Your <tt>sys_sigalarm()</tt> should store the alarm interval and
the pointer to the handler function in new fields in the <tt>proc</tt>
structure; see <tt>kernel/proc.h</tt>.
<li>You'll need to keep track of how many ticks have passed since the
last call (or are left until the next call) to a process's alarm
handler; you'll need a new field in <tt>struct&nbsp;proc</tt> for this
too. You can initialize <tt>proc</tt> fields in <tt>allocproc()</tt>
in <tt>proc.c</tt>.
<li>Every tick, the hardware clock forces an interrupt, which is handled
in <tt>usertrap()</tt>; you should add some code here.
<li>You only want to manipulate a process's alarm ticks if there's a a
timer interrupt; you want something like
<pre>
if(which_dev == 2) ...
</pre>
<li>Only invoke the process's alarm function, if the process has a
timer outstanding. Note that the address of the user's alarm
function might be 0 (e.g., in alarmtest.asm, <tt>periodic</tt> is at
address 0).
<li>It will be easier to look at traps with gdb if you tell qemu to
use only one CPU, which you can do by running
<pre>
make CPUS=1 qemu
</pre>
</ul>
<h2>test1(): resume interrupted code</h2>
<p>Test0 doesn't tests whether the handler returns correctly to
interrupted instruction in test0. If you didn't get this right, it
is likely that test1 will fail (the program crashes or the program
goes into an infinite loop).
<p>A main challenge is to arrange that when the handler returns, it
returns to the instruction where the program was interrupted. Which
register contains the return address of a function? When the kernel
receives an interrupt, which register contains the address of the
interrupted instruction?
<p>Your solution is likely to require you to save and restore
registers---what registers do you need to save and restore to resume
the interrupted code correctly? (Hint: it will be many). There are
several ways to do this, but one convenient way is to add another
system call <tt>sigreturn</tt> that the handler calls when it is
done. Your job is to arrange that <tt>sigreturn</tt> returns to the
interrupted code.
Some hints:
<ul>
<li>Add the <tt>sigreturn</tt> system call, following the changes
you made to support <tt>sigalarm</tt>.
<li>Save enough state when the timer goes in the <tt>struct
proc</tt> so that <tt>sigreturn</tt> can return to the
interrupted code.
<li>Prevent re-entrant calls to the handler----if a handler hasn't
returned yet, don't call it again.
<ul>
<p>Once you pass <tt>test0</tt> and <tt>test1</tt>, run usertests to
make sure you didn't break any other parts of the kernel.