Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.TH ANM 1 2017-01-18
|
1987-02-04 13:10:17 +00:00
|
|
|
.SH NAME
|
|
|
|
|
anm \- print name list
|
|
|
|
|
.SH SYNOPSIS
|
1991-10-01 12:18:39 +00:00
|
|
|
anm [ \-gnoprus ] [ file ... ]
|
1987-02-04 13:10:17 +00:00
|
|
|
.SH DESCRIPTION
|
|
|
|
|
.I Anm
|
|
|
|
|
prints the name list (symbol table) of each ack.out(5) format object
|
|
|
|
|
.I file
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
in the argument list.
|
|
|
|
|
If an argument is an aal(1) or arch(1) archive,
|
1991-11-18 09:46:53 +00:00
|
|
|
a listing of each object file in the archive will be produced.
|
1987-02-04 13:10:17 +00:00
|
|
|
If no
|
|
|
|
|
.I file
|
|
|
|
|
is given, the symbols in
|
|
|
|
|
`a.out'
|
|
|
|
|
are listed.
|
|
|
|
|
.PP
|
|
|
|
|
Each symbol name is preceded by its value, a section indicator
|
|
|
|
|
and a type indicator.
|
|
|
|
|
A section indicator can be
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB U
|
1987-02-04 13:10:17 +00:00
|
|
|
(undefined symbol),
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB A
|
1988-09-29 16:29:11 +00:00
|
|
|
(absolute symbol),
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB C
|
1988-09-29 16:29:11 +00:00
|
|
|
(common symbol), a section number (section related symbol),
|
1987-02-04 13:10:17 +00:00
|
|
|
or
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB \-
|
1987-02-04 13:10:17 +00:00
|
|
|
(other symbol).
|
|
|
|
|
A type indicator can be
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB F
|
1987-02-04 13:10:17 +00:00
|
|
|
(filename),
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB M
|
1987-02-04 13:10:17 +00:00
|
|
|
(module name),
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB E
|
1987-02-04 13:10:17 +00:00
|
|
|
(external (global) symbol),
|
|
|
|
|
or
|
Tune the installed manual pages.
This commit slightly improves the formatting of the manuals. My
OpenBSD machine uses mandoc(1) to format manuals. I check the manuals
with `mandoc -T lint` and fix most of the warnings. I also make
other changes where mandoc didn't warn me.
roff(7) says, "Each sentence should terminate at the end of an input
line," but we often forgot this rule. I insert some newlines after
sentences that had ended mid-line.
roff(7) also says that blank lines "are only permitted within literal
contexts." I delete blank lines. This removes some extra blank lines
from mandoc's output. If I do want a blank line in the output, I call
".sp 1" to make it in man(7). If I want a blank line in the source,
but not the output, I put a plain dot "." so roff ignores it.
Hyphens used for command-line options, like \-a, should be escaped by
a backslash. I insert a few missing backslashes.
mandoc warns if the date in .TH doesn't look like a date. Our manuals
had a missing date or the RCS keyword "$Revision$". Git doesn't
expand RCS keywords. I put in today's date, 2017-01-18.
Some manuals used tab characters in filled mode. That doesn't work.
I use .nf to turn off filled mode, or I use .IP in man(7) to make the
indentation without a tab character.
ack(1) defined a macro .SB but never used it, so I delete the
definition. I also remove a call to the missing macro .RF.
mandoc warns about empty paragraphs. I deleted them. mandoc also
warned about these macro pairs in anm(1):
.SM
.B text
The .SM did nothing because the .B text is on a different line. I
changed each pair to .SB for small bold text.
I make a few other small changes.
2017-01-19 04:02:30 +00:00
|
|
|
.SB \-
|
1987-02-04 13:10:17 +00:00
|
|
|
(local symbol).
|
|
|
|
|
The output is sorted alphabetically.
|
|
|
|
|
.PP
|
|
|
|
|
Options are:
|
|
|
|
|
.TP
|
|
|
|
|
.B \-g
|
|
|
|
|
Print only external (global) symbols.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-n
|
|
|
|
|
Sort numerically rather than alphabetically.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-o
|
|
|
|
|
Prepend file name to each output line rather than only once.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-p
|
|
|
|
|
Don't sort; print in symbol-table order.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-r
|
|
|
|
|
Sort in reverse order.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-u
|
|
|
|
|
Print only undefined symbols.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-s
|
|
|
|
|
Sort in section order.
|
|
|
|
|
.SH SEE ALSO
|
|
|
|
|
ack.out(5)
|
