Put former NATIVE_DEFINES into config.h. Such tcc can be run
and tested directly from source more easily, like for example:
tcc -run tcc.c -B. -run test.c
Also:
- tccelf.c: cleanup
- tccpp.c: avoid stupid clang warning
- configure: reduce -Wno- switches
- tcc.h: inline wait/post_sem()
- tccpe.c: simplify import (assume STT_NOTYPE is function)
with -Wl,-oformat=binary, executable code should come first.
(for linux kernel image for example)
Also:
- simplify RELRO sections: create them as readonly, but add
SHF_WRITE flag later when needed (i.e. relocations do exist)
- tcc.h etc: exclude eh_frames on non-elf platforms
- tccelf.c:tcc_load_object_file(): don't load debug sections when
linking without -g (special dwarf case in relocate_section()
wont work when dwlo/hi were not initialized).
- tcc.c: avoid loop if something fails (ret < 0) without message
(while failing without message should not happen either)
- tccelf.c:tcc_load_alacarte: give message
- tccpp.c: treat '# 123xyz' in asm file as comment
- lib/Makefile: cleanup
- libtcc.c: tcc_add_library(): fallback to try filename as is
(also remove tcc_add_library_err())
patch originally made to prove correctness (comparing stages)
with tinycc compiling gcc 2.95.3 which would assign registers
differently (but still correctly) when compiled with tcc without
this option).
Also: fixes get_temp_local_var() which on 32-bit systems
happened to return a temporary location that was still
in use because its offset was changed on the vstack
(incremented by four in gv() to load the second register
of a long long).
Also: optimize vrot-t/b (slightly) by using one memmove
instead of moving elements one by one in a loop.
- output correct line number with "error: duplicate case value"
- libtcc.c:error1(): support specific line numbers with "%i:"
tcc_error("%i:message ...", line_num, ...);
Also:
- simplify signed/unsigned switch compare
- optimize implicit case ranges such as
case 1: case 2: case 3: ...
- simplify llong constant propagation in gen_opic()
- rename Sym.ncl to Sym.cleanup_func
This requires adding .eh_frame and .eh_frame_hdr sections.
There are 3 new functions to setup the sections:
tcc_eh_frame_start: create cie in .eh_frame
tcc_debug_frame_end: add fde in .eh_frame for every function
tcc_eh_frame_hdr: create .eh_frame_hdr
The PT_GNU_EH_FRAME header is created.
The dwarf read functions are moved from tccrun.c to tcc.h
The backtrace() function is not supported on all targets.
windows, apple, bsd and arm are disabled.
arm uses its own sections .ARM.extab and .ARM.exidx.
- LIBTCCAPI int tcc_set_backtrace_func(void *ud, ...)
accept opaque user data pointer,
- tcc -vv -run... : show section info
- use memalign() to allocate runtime memory
- printline_/dwarf : pass output to parent function
- tccpe.c : fix -nostdlib -run
- --config-backtrace=no : make it work again
- new LIBTCC API tcc_setjmp() to allow longjmps & signals
from compiled code back to libtcc per TCCState
- new LIBTCC API tcc_set_backtrace_func() to handle backtrace output
- move c/dtor/atexit stuff to runtime (lib/runmain.c)
- move bt-log.o into libtcc1.a
- add timeouts to github action (beware, it did happen to hang
infinitely in the signal handler at some point)
- abort with notice when tcc_relocate() is called with the
former two-step method
- support backtrace & bcheck not only with tcc_run() but also
for directly called functions from tcc_get_symbol(); enable
witn 'tcc_set_options("-bt/-b");'
- move struct rt_context and debug sections into compiled code
for TCC_OUTPUT_MEMORY also
- protect access (g_rc) with semaphore
Also:
- add armv7/aarch4/riscv64 github tests (qemu emulated)
- win32/build-tcc.bat: build cross compiler only with -x
- remove TOK_NOSUBST, mark the token itself instead
- get_tok_str(); mask out SYM_FIELD & update uses
- next(): optimize (~5% faster with tcc -E)
- tok_flags: remove some redundancy
- parse_define(): do not remove spaces around '##' and after '#'
and mark macros with '##' as MACRO_JOIN to avoid unnecessary
call to macro_twosharps(mstr):
- next_nomacro(): removed, next_nomacro1(): renamed to next_nomacro()
- next_argstream(): cleanup & new function peek_file()
- macro_subst_tok(): handle special macros (__DATE__ etc.)
like normal macros if they are #defined
- -DPP_DEBUG : more structured output
- pp_error(): better preprocessor expression error message
- tcctok.h: sort basic keywords (somehow)
- testspp/Makefile: generate .expect with 'make testspp.##+'
- tcc.c: tcc -E -o file : put unixy LFs also on windows
removed second argument for tcc_relocate(s). previous
'TCC_RELOCATE_AUTO' is now default and only behavior.
Rationale:
In the past, the option to compile into memory provided by the
user was introduced because only one TCCState could exist at a time.
This is no longer a limitation. As such it is also possible now to
keep any number of compiled code snippets around together with their
state in order to run them as needed.
- Also
- LIBTCCAPI tcc_get_error_func/opaque() removed
- tccrun/SELINUX: switch rx/rw mappings such that rx comes first
(risc64-link.c:relocate_plt() does not like got < plt)
- tcc_relocate_ex(): free local symbols and obsolete sections
to reduce memory after tcc_relocate()
When using libtcc it's reasonable to be able to use the application's
memory allocator for all allocations, including tcc_new(), and including
#define MEM_DEBUG
Ideally the allocator would be stored in the TCCState, like TCCErrorFunc.
That would imply a new API tcc_new_with_allocator(), but more importantly
would require all uses of tcc_malloc(x) to be changed to s->tcc_malloc(x).
That's a non-starter in my book.
Instead I refactored the memory management code so that all allocations
flow through tcc_realloc(). Which simply calls a function pointer, the
default value of which is the previous tcc_realloc().
It then becomess trivial to install a new allocator with the new function:
LIBTCCAPI void tcc_set_realloc(TCCReallocFunc realloc);
The resulting code adds the trivial cost of an additional function call
per allocation/free. It also doesn't distinguish between malloc failure
and realloc failure, but since both just fprintf then exit() that seems
unimportant to me.
On the plus side the preprocessor magic is much more clear. The diffs
don't hightlight that, but take a look at the result to see if you agree.
All tests passed on my x86 linux box.
tccpp.c:
- revert "Preprocessor fix + new testcase"
Fix was not a fix and nobody could understand the test.
This reverts 6379f2ee76
- better fix and add new test (pp/18.c)
tccgen.c:
- remove global variables 'in_sizeof', 'constant_p'
- rework comma expression (gexpr())
- merge func/data 'alias_target' codes
(See 08c777053c)
- move call to do_Static_assert()
- better error: "expression expected before '%s'"
- fix "statement after label"
- remove unnecessary second parameter to block()
- remove unnecessary call to decl()
- revert changes to old C89 test file
See 7f0a28f6ca
tccelf.c:
- rework "...make undefined global symbol STT_NOTYPE"
(See f44060f8fc)
- move tccelf_add_crtbegin() from libtcc.c
tcctest:
- unfix K&R fix (keep old look of K&R functions)
tccrun.c:
- exit(0) returns 0
libtcc.c:
- move #defines for -dumpmachine
- more explicit error "file not found"
(as opposed to error while loading file)
tccpe.c, x86_64-gen.c, i386-asm.c, tccasm.c:
- use R_X86_64_PLT32 for functions on x86_64-win32
tccdefs.h
- empty #defines for _Nonnull, __has_builtin(), etc.
configure:
- Simpler "macOS .dylib ... VERSION letters."
(See 6b967b1285)
Makefile:
- macOS version also
- add cross searchpaths for packages
build.yml:
- disable codesign on macos-11 (doesn't seem to work)
libtcc.c:
- revert "Small patch to allow..." (someone's personal easteregg)
(see da3a763e97)
- check return value from macho_load_tbd/dylib
tcc.c:
- remove help for "not yet implemented" option
tccelf.c:
- check PIE's for "unresolved symbols"
tccgen.c:
- avoid int->double->int cast
(see a46372e910)
- fix constant propagation with pseudo long doubles
(must mask out VT_LONG from type)
- cleanup find_field() (again)
tccpp.c:
- disallow strings and double constants in #if expressions
win32/include/uchar.h:
- change file mode
The following targets are added:
testc / testc2.all / testc2.37 / testc2.37+ / testc2.37-
testcpp.all / make testcpp.17
This allows to check that the testcase(s) test the code modified.
See Makefile tests/pp/Makefile tests/tests2/Makefile
lib/tcov.c: Fix while loops with fgets.
tcc.h: Fix tcc_p compilation with latest gcc
tests/tests2/22_floating_point.*: Better test floating point
In order to detect a "same file" faster, this makes one
restriction to the feature: the basenames are required to
match at least (as in "test.h" and "dir/../test.h")
Also remove obsolete 'pp_once' (cached includes do not persist
across compilations anymore anyway)
This rewrites commits
30fd24abd44e363a1728
3 files changed, 38 insertions(+), 74 deletions(-)
pragma once can now be used with
test.h
./test.h
and other references to the same file just like gcc/clang.
On linux we can use stat and st_ino to check for the same file.
On windows the st_ino does not work so we calculate a file hash
if the size of the file differs and then compare the hash.
avoid memory leaks with lost CStrings on stack after errors.
tccpp.c:
- use/abuse static Cstring tokcstr where possible
tccgen.c:
- use/abuse static Cstring initstr where possible
tcc.h/libtcc.a:
- add 'stk_data' array to track memory pointer on stack
- add macros stk_push/pop() and cstr_new/free_s()
tccasm.c:
- use that
- use char[16] instead of char* for op.constraint
This avoids 'exit(1)' with errors outside of compilation
(nasty in particular with libtcc usage)
As a sideeffect multiple errors can be seen for linker
errors (such as undefined symbols, relocation errors, ...)
Value 0 and values >2GB where printed wrong during tests with yarpgen (v1)
Starting the output with a hashtag make it compatible to TAP
--
Regards ... Detlef
tccgen.c:
- just track local_stack for small scopes (can't declare variables)
- fix a vla problem with nested scopes
- move debug N_L/RBRAC into curly braced block
Also:
- tccpp.c: move 'label_...' functions to tccgen.c
- tccpp.c: let get_tok_str() say "<no name>" for anonymous symbols
- tcctest.c: let __pa_symbol() work for memory > 2GB
- 119_random_stuff.c: revert strtoll test (no reason to test libc)
- tccdefs.h/tcctest.c: enable bit fncs for _WIN32
- Makefile:
- use i686-linux-gnu instead of i386-linux-gnu for cross-i386
- update 'make help'
- revert umplicit 'make all' with 'make install' (but print warning)
The following code:
typedef struct {
unsigned int a __attribute__((nodebug));
unsigned int b;
unsigned int : 32;
unsigned int c;
} tst;
Supresses a and also suppresses bitfield padding.
So debugger shows only b and c in above example.
I have a testfile created by YARPGen (seed=9), which displayed
a negative bss size without this patch.
* tcc needs also a bigger VSTACK_SIZE (i used 512)
--
bye bye ... Detlef
With these option I can now built several packages without problem.
There are a lot of options we can add so I tried to implement the
minumum.
Add the following options:
dynamiclib same as -shared
flat_namespace default/ignored
two_levelnamespace ignored
undefined default/ignored
install_name name of dynmic lib
compatibility_version version dynamic lib
current_version version version dynamic lib
-Wl options:
all_load same as whole-archive
force_load same as whole-archive with lib
single_module ignored
I tested on macos 10, 11, 12 and 13 that old and new macho code work.
I do not know when this new format is introduced but it is now
available on a lot of versions. So make it the default.
Also default to dwarf=4 because stabs and dwarf=5 is not supported.
Update tccrun.c to detect rebase for dwarf debug info.
Enabled testcase 126 on macos.
Add prologue_end/epilogue_begin supoort in tcc.h, tccdbg.c, tccgen.c.
This reverts commit 2507c71704.
Why crowd up search-paths for the normal native compiler with
all sort of invalid stuff. Why -UCONFIG_TRIPLET if it isn't
set at all for cross-compilers. Also, the patch still didn't
do anything useful "out of the box".
Instead I'd suggest to do something more simple and more effective.
See Makefile:
- set search paths for cross-compilers to /usr/<triplet> by default
- Install any built "xxx-tcc" and "xxx-libtcc1.a", even if not listed
with PROGS_CROSS/LIBTCC1_CROSS
- Support ELF-<target> = ... to set the elf interpreter
Some common gnu-triplets are supported by default
TRIPLET-i386 ?= i386-linux-gnu
TRIPLET-x86_64 ?= x86_64-linux-gnu
TRIPLET-arm ?= arm-linux-gnueabihf
TRIPLET-arm64 ?= aarch64-linux-gnu
TRIPLET-riscv64 ?= riscv64-linux-gnu
Other triplets can be given explicitly, for example like this:
$ make cross-arm-eabi TRIPLET-arm-eabi=arm-linux-gnueabi
$ sudo make install
(As long as it is in the default install location and was not
moved elsewhere into the library search path manually)
Also:
- libtcc.c:
- error1(): show correct line with "In file included from ..."
- support "tcc -Bxxx -vv"
- tcc_new()/tcc_compile(): Don't create elf sections for tcc -E
- tccdbg.c:
- tcc -E -g : revert 1de025c13a
Let's keep things simple, everybody understands 'do_debug'
and dState is set by tcov too (but no debug sections).
- tccgen.c:
- avoid the extra parameter for gind()
(from c3e3a07ed4)
- vla func params: use skip_or_save_block() and enable
VT_LVAL (see 313855c232)
- cleanup nocode_wanted a bit
- tccelf.c:
- tccelf_end_file(): don't try to translate zero-sym relocs
(seems to happen with asm "jmp 0x1000")
- version_add(): do not make "ld-linux.so" DT_NEEDED
This allow the tcc cross compilers to work as expected,
when tcc was build with '--enable-cross' and a simple config-extra.mak
(see the provided config-extra.mak.example).
Make sure, that cross development packages for libc are installed
Fixes also open bugs in various bug tracker. Example in debian: 940469
tcc: error: library 'c' not found
tcc: error: file 'crtn.o' not found
tcc: error: undefined symbol 'printf'
This fixes the bug that "tcc -gdwarf ..."
still creates the stab debug infos,
when tcc was build without using DWARF debug infos by default
(configure option: --dwarf=x)
--
Regards ... Detlef
- also simplify parse(_line)_comment() and parse_pp_string()
- fixes a continuation problem in strings (see tcctest.c)
- no differences in performance could be observed
161 insertions(+), 246 deletions(-), less 85 lines
an expression like 'i*0', even though it's value is constant and
can be evaluated at compile time is not an integer constant expression,
and hence no null pointer constant, and therefore the conditional
operator doesn't select the other type.
The parameter is stored in tccstate, but nothing more.
Used by multiple software packages.
Current tested example is OpenWatcom-v2
--
bye bye ... Detlef
Allows to create dynamic executables, using the code path
for TCC_OUTPUT_DLL but add an .interp header (plus a FLAGS_1
entry in the dynamic section to make 'readelf' say "PIE")
Introduces TCC_OUTPUT_DYN as alias for TCC_OUTPUT_DLL.
There is no runtime option, only one to configure:
./configure --config-pie
100 insertions(+), 76 deletions(-)
